You are on page 1of 1

Team21 file:///F:/OJT P2TK/Diagnostic electrical/program files/TEAM21TOO...

Electrical 2

Garis Besar Fungsi

Registration method of additional key code (ex.) (2) Registrasi kode kunci
tambahan
Security indicator
START
Ini adalah fungsi untuk
BLINKING memasang registrasi tambahan
(until the pada kode kunci transponder
first key is
inserted) Make sure that the vehicle fulfills the following conditions: yang baru ( kode master key
・Driver door is closed. dan kode sub key) dengan kode
・No key is inserted in the ignition key cylinder.
kunci transponder terdaftar
dalam ECU.
Insert the already registered master key
in the ignition key cylinder.
Gambar menunjukkan contoh
metode registrasi tambahan
OFF
untuk kunci transponder, tipe
Turn the ignition switch ON/LOCK alternately 5 times.
Open/close the driver door alternately 6 times. Within
kontrol ECU Metode registrasi
35 sec. ini difungsikan dengan switch
pengapian dan beroperasinya
Remove the master key. dari pintu pengemudi.
ON PETUNJUK:
Insert the key to be registered
Within
10 sec.
Registrasi tambahan juga
in the ignition key cylinder. bisa dilakukan menggunakan
BLINKING
hand-held tester.
After 60 sec. the key is registered. Pada tipe kontrol ECU
(The security indicator goes off.)
mesin, registrasi dan
OFF penghapusan dipasang
dengan bekerjanya pedal
END
rem dan pedal gas.
Klik pada tanda bohlam atau kalimat yang digarisbawahi. Nomor registrasi untuk kode
kunci transponder bervariasi
tergantung modelnya.

(3) Penghapusan kode kunci

(3/4)

1 of 1 2/10/2021, 6:22 AM

You might also like