Initial registration method of key code (ex.) 2. Fungsi registrasi kode
kunci transponder START Security indicator blinks until the first key is inserted. (1) Registrasi inisial kode The indicator lights kunci (initial registration of up after the key registration. key code) Ini adalah sistem register Insert the key in the key cylinder. Security indicator ON otomatis kode kunci transponder yang baru (kode Under registration. master key dan kode anak (The registration is completed in about 1 sec. Security indicator kunci) bila ECU diganti. after the key is inserted.) OFF Bila ECU diganti, memutar switch pengapian ke posisi Registration completion. ON dapat membuat lampu Security indicator ON (After the last key has keamanan berkedip. Pada been registered, the indicator remains OFF until remove the saat seperti ini, dengan Remove the key. key. And after remove the key, the indicator memasukkan master key blinks.) dan anak kunci ke lubang kunci kontak secara otomatis YES Will you register akan meregistrasi kode kunci the next key? transponder dalam ECU. PETUNJUK: NO Dalam mode registrasi inisial ( otomatis) kunci END transponder bisa diregistrasi untuk tiga atau Klik pada tanda boleh atau kalimat yang digarisbawahi. empat anak kunci. Registrasi terakhir dipakai untuk sub key registration mode. Setelah dilakukan registrasi inisial ini bisa dilakukan percobaan selama 30 menit untuk penyesuaian komunikasi ID antara kunci transponder ECU dan ECU mesin A.