‘See Note 1
‘Thread Size
——y |
Applicable
DIAMOND KNURL IDENTIFICATION Specifications
for "up to 1" dia ANSIB 185
SOCKET HEAD CAP SCREWS
~ 1960 Series UNC and UNF Threads
Sa UNC | UNF wel Wom UNC | UNF Loewe UNC | UNF |
Noo} - | 80 | 00% | 0060 | 007 000 joo, - | 21 - 16) -| 190
nos | et | 72 | ore | 0073 | 0087 007s | s7|_39|_27| 29| 290| 200
No2 | 56 | 64 | 0140 00860 01000 0.08 | %, | 62) 67° 46 50, 400, «30
Noa | ao | 48 | 0189 | 01120 | 01900 0112 | %m | 192) 145 99, 109, 640, 720,
Nos | 40 | 44 | 0205 | 01250 | 01450 0.125 | %e | 196) 205 147/154) 860/900
nos | a2 | 40 226 | a1990 01580 0.138 | %e | a4s| 276) 184| 207) 960) 1120
Nos | s2_| 96 | 0270 | 0.1640 | 0.1860 0.164 | Ye 455 | 480, 941 980| 1540) 1640
‘No.10 24 32 0312 0.1900 | 0.2180 0.190 hsp 654 755) 49.1 566) 1880) 2240
No.12 24 28 0343 0.2160 | 0.2440 0.216 Sta 102.0) 1090) 765 81.8) 2650) 2890
% | 20 | 28 | 0375 02500 | 02760 0.250 | ‘he | 1880| 1780 1150 1320] 3470| 4160
it.
Tq | 1] | oases | O3teS | Onms | OR | | Bea] eS) Te7] a0] seo) eee
ae | 16 | 26 | 0882 03750 04150 0975 | in | 46e| 832) 351| 399 700, 10300
‘hg_| 14_| 20 | 062s | o4a7s| 0480s | 0497 | % | 750| e40| s63| 630, 12000 10900,
| 43 | 20 | 0750 05000 08520 0500 | % | 1150| 1290/ 663| 968) 16100 18000
he 12 18 0.843 0.5625 0.6225 0.562 The 165.0} 185.0 124.0| 139.0 20800) 23900
5a | 11 | 18 | 0.987 | 0.6250 | 0.6800 0.625 v_| 2280| 2580, 171.0| 1940 25800, 30400
m% | 40 | 16 | 1125 | 07500) oa20 0.750 | % | a6a0| 4050) 2730| s040| s4soo| e900
Te a 4 1.912 | 0.8750 0.9630 | 0.875 Me 586.0} 646.0 440.0) 485.0 48000 54600
1 | 2 | s2 | 1500 | 1.0000 | 1.1100 | 1000 % | 8790 9620| e500| 7220\ 62100, 71000
We | 7 | 32 | t987 | 4.1250) 12950 / 1.125.) % | ¥2500| 14000) 9080| 10500) 79500) 92200
tm | 7 | 42 | 1876 | 12500 1.3700 | 1.260 | % | 17600| 18250 | 19200| 14600 102000) 109000
1% | 6 | 12 | 202 | 13760, 150501975 | 1 | 22200| 26200, 17300| 19700, 120000, a000
‘We | 6 | 12 | 2250 | 1.5000/ 16400 | 1500 | 1 | 27900| 27=00| 2a000| 25800) x22000) 197000
1% | 5 | 12 | 2625 | 1.7500, 19100 1.750 | 1% | 49900| 44800 | 96900| «1550 188000, 184000,
2 | 4% | 12 | 3000 20000 2.1800 2.000 13% 72700 | 77600 $4800| 62700 264000 | 295000
{ALL DIMENSIONS IN INCHES.
MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade Alloy Stee! 1. For body and thread lengths see pages 16 & 17.
Heat Treatment. Re 39-43 2. Thread Class: #0 through 1" dia. - 3A
See ae ay te en cana!
Tensile Strength 190,000 Ibn? 180,000 Ibt/in® 2 ransition Diameter
YieldSwength 170000 tin: 162000 lbther Working Temperature: 50°C 3300°C
She " i * 5. Torques calculated in accordance with VDI 2230
ear Strength 114,000 Ibf/in® 108,000 Iti’
“Systematic calculation of high duty bolted joints”
with o 0,2 = 185 K.S.l. and p = 0.128 for plain finish
and = 0.094 for plated. Above 0.625" dia.
002=140KSI.
Min. Elongation 9%. 9%
18technical brochure
UnbrakoAcomprehensive catalogue of UNBRAKO® socket screws and related products
In this catalogue you will find complete information about UNBRAKO socket screws and such related products as
shoulder screws, dowel pins, pressure plugs and hex keys. Everything you need to select, specify and order these
precision products is at your finger tips except actual prices. Furthermore, all data has been organized to let you find
the facts you want with the greatest speed and the least effort.
Wherever possible, all data for a particular product is presented in a two-page spread for your convenience.
This guide refers to products and sizes that may not be manufactured to stock, Please consult an UNBRAKO
distributor or UNBRAKO to determine availability.
For prices of stock items, see current UNBRAKO fastener price lists or call your local UNBRAKO fastener distributor.
For non-stock items, consult your UNBRAKO fastener distributor, or contact the UNBRAKO Engineered Fastener
Group by phone at +91 - 161 - 3911111 or by fax on #91 - 161 2774400 or Internet at http://www. unbrako.com,
Commercial and Government Entity (CAGE) Code SFS58
IMPORTANT
The Understanding Unbrako Technical Brochure is a GUIDE designed to aid product selection, with reference to
descriptive and technical data as well as technical discussions for application and use.
‘The use of precision fasteners in the worldwide market has led to the creation of many standards. These standards
specify the fastener requirements: dimensions, material, strength levels, inspection etc. Different standards are the
responsibility of various organisations and are not always identical. Unbrako supplies precision fasteners
manufactured to Unbrako internal specifications, designed to achieve maximum interchangeabllity with all standards.
Reference Consensus standards referred to in the Technical Brochure were current at the time of publication.
However, Reference Consensus standards are subject to change by any standards organisation at any time.
Technical data provided in this brochure is for reference only and does not constitute certification that products
supplied were manufactured to any specific values.
UNBRAKO products are manufactured in accordance with revisions valid at time of manufacture.
Unbrako reserves the right to update or modify its manufacturing specifications without prior notice.
A direct or indirect reference to a consensus standard to represent that a fastener conforms to particular requirements
of the consensus standard shall not be construed as a representation that the fastener meets alll the requirements of
the consensus standard.
The technical discussions referenced in this guide represent typical applications only. The use of information provided
is at the sole discretion of the reader. Because applications vary enormously, UNBRAKO does not warrant the
scenarios described are appropriate for any specific application. The reader must consider all variables prior to using
this information.
Products modified other than by UNBRAKO are not guaranteed and not subject to return.
LIMITED WARRANTY AND EXCLUSIVE REMEDY
Deepak Fasteners Ltd, through its Unbrako Division and associated companies, warrants that these products conform to industry standards spectied herein and
willbe free from defects in materials and workmanship, This warranty is expressly gven in leu of any and all other express or implied warrants, including any
implied warranty of merchantabilty or finess for a paricular purpose, and in ieu of any other obligation onthe part of Deepak Fasteners
Deepak Fasteners wl atts option, repair or replace free of charge (excluding all shipping and handling costs) any products which have not been subject to
misuse, abuse, or modification and which in its Sole determination were not manufactured in compliance with the warranty given above
Deepak Fasteners makes no representations or warranties, express or implied, that anything imported, made, used, sold, or otherwise provided under any sale
agreement is or wil be free fom infringement of patents or other proprietary rights of any third persons. Nothing in this appication, or any agreement. shall be
‘construed ae giving rse to any obligation on Deepak Fasteners part o indemnify or hold harmless any Buyer fern any lial relating to Buyer's purchase, use,
or re-sale of Deepak Fasteners product, othe incorporation of Deepak Fasteners product info another manufactured product.
‘The remedy provided herein shall be the exclusive remedy for any breach of warranty or ay claim arising in any way out of the manufacture, sale or use of these
products, In no event shall Deepak Fasteners be liable for consequential. incidental or ary ether damages of any nature whatsoever except those speotically
provided herein for any breach of warranty or any claim arising in any way ofthe manufacture, sale or use ofthese products. No other person is authorized by
Deepak Fasteners to gve any other warranty, writen of oral, pertaining to the products.
eds hw ee Deered, lice raiien tc lied onion erineiacion en resinsCONTENTS,
Quick Selector Guide
Socket Head Cap Screws
Introduction
Product Features
Applications
180 Metric Threads
~ Dimensions & Tightening Torques
= Body and Grip length
- Micro Screw
- Low Head
1936 Series B BA BSW & BSF Threads
~ Dimensions & Tightening Torques
= Grip Lengths
1936 Series UNC & UNF Threads
= Dimensions & Tightening Torques
- Grip Lengths
41960 Series UNC & UNF Threads
~ Dimensions & Tightening Torques
~ Grip Lengths
sunk Socket Head Screws
Description
180 Metric Threads
= Dimensions & Tightening Torques.
- Body & Grip Lengths
BABSW & BSF Threads
~ Dimensions & Tightening Torques,
- Body & Grip Lengths
UNC & UNF Threads
~ Dimensions & Tightening Torques
~ Body & Grip Lengths
Button Head Socket Screws.
Description
180 Metric Dimensions
BS, BSW and BSF Dimensions
UNC & UNF Dimensions
Flange Button Head Socket Screws
180 Metric Dimensions
Socket Set Screws
Description
Point Style
180 Metric Threads
~ Dimensions & Tightening Torques 34.835
= Torsional Holding Power 38 & 39
= Microsize 40
UNG, UNF, BA, BSW, & BSF Threads
~ Dimensions & Tightening Torques 96 & 37
- Torsional Holding Power 38439
Socket Shoulder Screws
‘Applications a2
Description 4B
180 Metric Dimensions 44
UNC, UNF, BSW & BSF Dimensions 45
Due to @ continuous policy of research and development Unbrako reserve the right to alter the
speeifcation of any product without prior notice.
Performance data listed is for standard production items only. Non stock items may vary due to
variables in methods of manufacture. It is recommended that the user verify performance on any
‘non-standard parts for critical applications.CONTENTS,
Quick Selector Guide
Socket Head Cap Screws
Introduction
Product Features
Applications
180 Metric Threads
~ Dimensions & Tightening Torques
= Body and Grip length
- Micro Screw
- Low Head
1936 Series B BA BSW & BSF Threads
~ Dimensions & Tightening Torques
= Grip Lengths
1936 Series UNC & UNF Threads
= Dimensions & Tightening Torques
- Grip Lengths
41960 Series UNC & UNF Threads
~ Dimensions & Tightening Torques
~ Grip Lengths
sunk Socket Head Screws
Description
180 Metric Threads
= Dimensions & Tightening Torques.
- Body & Grip Lengths
BABSW & BSF Threads
~ Dimensions & Tightening Torques,
- Body & Grip Lengths
UNC & UNF Threads
~ Dimensions & Tightening Torques
~ Body & Grip Lengths
Button Head Socket Screws.
Description
180 Metric Dimensions
BS, BSW and BSF Dimensions
UNC & UNF Dimensions
Flange Button Head Socket Screws
180 Metric Dimensions
Socket Set Screws
Description
Point Style
180 Metric Threads
~ Dimensions & Tightening Torques 34.835
= Torsional Holding Power 38 & 39
= Microsize 40
UNG, UNF, BA, BSW, & BSF Threads
~ Dimensions & Tightening Torques 96 & 37
- Torsional Holding Power 38439
Socket Shoulder Screws
‘Applications a2
Description 4B
180 Metric Dimensions 44
UNC, UNF, BSW & BSF Dimensions 45
Due to @ continuous policy of research and development Unbrako reserve the right to alter the
speeifcation of any product without prior notice.
Performance data listed is for standard production items only. Non stock items may vary due to
variables in methods of manufacture. It is recommended that the user verify performance on any
‘non-standard parts for critical applications.QUICK SELECTION GUIDE
Application
Features
Alloy Steel
)
Stainless Stoo!
Suitable for all high tensile applications.
Use stainless for corrosive-cryogenic
or elevated temperatures.
Socket Low Head Cap Screw
(mp
Alloy Steel
Suitable for use in parts too thin for std.
SHCS; and for applications with limited
clearances.
Countersunk Socket Head Screws
Qu
Alloy Steel
(um
Stainless Stoo!
Controlled angle under the head ensures
maximum flushness and sidewall contact.
Non-slip Hex socket prevents marring of material.
‘Note: Inclined angle under the head varies
as follows:
BSW & BSF Threads - 90°C
UNC & UNF Threads - 82°C
Metric Threads 90°
Above M20 60°C
Button Head Screws
pes Mn Haslilie
Aloy 4
Stainless Stee!
Low heads streamline design
Use them in materials too thin to countersink
also for non-critical loading requiring heat
treated screws.
Flange Button Head Screws
Alloy Steel
Allows covering of large diameter holes
in sheet metal
Can be used with softer materials.
‘Shoulder Screws
3 a
Alloy Steel
Replaces costly special parts -
shafts, pivots, pins, guides, linkages
and trunnion mountings. Also standard for
tool and die industries.
Socket Set Screws
Alloy Steel
Stainless Stee!
Fasten collars, sleeves, gears, knobs
on shafts. Locate machine parts
Cone, half dog, oval, cup and self locking
knurled cup points are standard.QUICK SELECTION GUIDE
Maximum Operating Corrosion Magnetic or
Temperature Unplated Material Resistance Non-Magnetic Page
High Grade
sore Unorto cas stagnate
Alloy Steel nt
41018
Austenitic
sone Stainless Excelent Non-Magnetic
Steel
High Grade
Unto cana, Magneto 1
Alloy Steel vi
igh Grade
oe Unbrako cata, Magneto
Alloy Steel ”
} { 1910.26
Austenitic
430°C Stainless Excellent Non-Magnetic
‘Steel
High Grade |
7
ore Unite eats, Magnete
Alloy Stee!
| 271090
Austenitic
sore Stainless Excellent Non-Magnetie
Steel
igh Grade
300°C Unbrako ion Magnetic 3110.32
Alloy Stee!
High Grade
s00°c Unbrako Fair Magnetic aito44
Alloy St
High Grade Plating
Unbrako onew Magnetic
Alloy Stee!
7 31099
Austenitic
snc Stainless Excelent Non Magnetic
SteelSOCKET HEAD CAP SCREWS
It you use fasteners, you know their importance in today's
technology. Higher pressures, higher stresses and higher
speeds demand stronger, more reliable joints, and
stronger, more reliable fasteners to hold them together.
Parts must stay together. A single failure can destroy
valuable equipment or stop an assembly line. Reliability
‘must be total
‘This is why industry is using more and more socket
head cap screws, the strongest threaded fasteners you buy
“off the shel”. They have the extra strength and fatigue
resistance required for total reliabillty in high strength
fastening,
‘Tensile and Fatigue Strength
Unbrako socket head cap screws have the highest levels:
Of strength and fatigue resistance in the industry. They
exceed all government and industry standards. Instead of
the usual range of 1220 Nimm', minimum tensile strength
lovels of Unbrako cap screws are consistently 1300 Nim
At the same time ductility and fatigue resistance are not
sacrificed,
‘When you buy tension fasteners (which is what socket
hhead cap screws basically are) you're buying clamping
force - the ability to hold things together. The additonal
strength offered by Unbrako screws can save pounds, it
you use the screws correctly.
‘The extra strength of Unbrako screws allows the use of
cither fewer fasteners of the same size, or the same
‘number of smaller screws to achieve the same clamping
force. With fewer fasteners you save on driling and tapping
and have fewer screws to buy and install. If you go the
‘other way, smaller screws generally cost less and permit
reduced assembly size, saving space, material and weight.
If you have dynamic stress or varying load conditions,
the exceptional fatigue resistance of Unbrako screws gives:
you an additional bonus of builtin protection against
fatigue failure.
Design
One of three major factors in the superiority of Unbrako
socket head screws is design. For example, socket depth
{s carefully controlled, The socket is deep enough for full
tightening without reaming and cracking, but not deep
‘enough fo weaken the head area and cause fallure.
Inspired by our research and development of aerospace
fasteners, another major feature on Unbrako socket
screws is the Radiused-Root-Runout. The root of the
thread runout is also radiused to eliminate the usual sharp
“V' - a major point of weakness in other threads. Fatigue
life in this critical area is increased as much as 300% in
certain sizes,
Class 4g 69 tolerances are standard, the closest without
solective assembly, They combine maximum cross-section
with smooth assembly, and assure better mating of parts.
‘The elliptical filet at the juncture of head and shank is
another aerospace-inspired Unbrako development. This
‘compound curve more than doubles fatigue life in the head
area without reduction of erical bearing area. Discontinuity
is minimised and stress concentrations are reduced,
providing an added margin of safety. Heads are correctly
proportioned to screw size, assuring full clamping force
without indentation and loss of preload,
Properties
‘Second major factor in Unbrako socket screw superiority
is their physical properties. These are no accident.
Consistently higher stress levels area direct result of
customised heat treatment. Carbon content of fumace
almospheres is closely controlled, since carburisation (too
‘much carbon) makes screws brite, while decarburisation
{too litle carbon) results in soft surface with poor strength
and resistance to wear. Every melt of Unbrako steel is pre-
tested and its treatment tallored to produce a consistent part.
Manufacturing Control
Closely controlled manufacturing is the third factor. Rigid
control of every operation of a socket screw is necessary in
order to guarantee performance.
Heads of standard Unbrako socket sorews are forged,
not machined. Machining cuts metal fibres, breaks flow
lines, creates planes of weakness at stress points. Forging,
fon the other hand, forms metal, produces uniform grain
flow, makes heads stronger by compressing the metal.
Head bearing area Is strictly perpendicular to screw body
to avoid strains and misalignment. Filet areas are procisely
controlled, with filets made glass smooth to eliminate
surlace irreguiatities where cracks can start
Ragiused threads of standard Unbrako screws are rolled,
‘not ground or cut. Rolled threads are more uniform and
closer tolerances can be maintained because Unbrako thread
roll dies and roling techniques produce smoother surfaces
land more accurate size control. High points and planes of
weakness are avoided.
Plating
Plating becomes more critical as the demand for plated
‘Screws increases. Unbrako socket screws that are to be
plated are accurately controlled to be within tolerance alter
plating. Precision plating thickness brings screws to correct
dimensions, while rigid control of the plating process
‘quards against screw failure trom hydrogen embritiement.
This is a bitle condition caused by hydrogen difusing into
the base material during cleaning and electroplating. It can
cause screw failure long atter the screw is tightened, but
can be avoided by the extreme care Unbrako take in
processing plated socket screws,
Unbrako Socket Screws pay off in Savings
You get extra safety and reliability in Unbrako socket
screws, plus significant economies, both in the cost of the
fasteners and the cost of their installation. Furthermore,
they protect the reputation of your product, which can well
depend on the fasteners that hold it together.
‘These are considerations too important to overlook
as production costs continue to rise and reliability
requirements become more exacting
“YOU'RE SAFER WITH UNBRAKO"UNBRAKO DEVELOPMENTS MEAN
- Extra Strength Where If Counts
Deep, accurate socket for uniform wrenching power and high
maximum torques. Precise knurls for easier handling and quick
| identification
i At l
lt
Precision forged head for continuous grain flow and maximum strength,
Elliptical head to shank filet for increased fatigue life.
— Radiused-root runout increases fatigue life
SHANK
Bopy
‘CONVENTIONAL THREAD UNBRAKO RADIUSED ROOT
RUNOUT Note sharp angie at RUNOUTTHREAD- Controlled
root where high stress radius of runout root provides a
concentration can develop smooth form that distributes
‘cracks in the screw. stress and increases fatigue life
of fastener considerably.
~.. Fully formed radiused threads rolled to maintain continuous grain
flow for greater tensile and fatigue strength.
— Heat treatment in a controlled atmosphere for maximum uniform
strength and surface integrity without brittleness or decarburisation.
i ht
Accurate contol of socket depth | Contoled hea forging fome__| oss-aslon of raiusd aly fomed
ates more wrench engagement | _unfor grain ow win unbroken | "Yous, Cour fotowrg fw
than other screws, permitting full flow lines, makes heads stronger, be
" threads, rest sipping and provide
Sohtening without oracking or | prevents fare inva lt area
nigh atu estas. Note the large
reaming to socket, yet maintaining | "and ado fatguo strong | Ma gue rsstarc, Not te re
fmpe metal inthe ol let sea ofthe sen. ;
‘development that increases fatigue life
for maximum head strength. ores treadAPPLICATIONS
FEWER HOLES TO DRILL AND TAP
Old Method
5 - M10 Screws
@ 800 Nimnr tensile
640 N/mm* yield =
5 x 840 x 68 =
186 kN max. load
HIGH TENSILE AND YIELD STRE
Ordinary Bolts
“Tnree screws do the work of five
Unbrako Method
3 + M10 Screws
@ 1300 N/mm tensile
1170 Nimm’ yield =
3x 1170 x 58 =
204 KN max. load
‘Old Method
800 N/mm* M12 Bolt
yield = 54 kN
‘Unbrako Method
1300 Nimm* M12,
Unbrako Bolt
tensile = 110 kN
yield = 99 KN
Extra Unbrako
Joint Strength:
tensile = 64% Increase
yield = 83% Increase
‘COMPACT SPACING
Clearance for socket wrench | No wrench clearance necessary
(Old Method Unbrako Method
12- M16 Hexagon 16 - M16 Socket Head
Head Screws Cap Screws
@ 800 Nimme @ 1300 Nimm?
tensile strength tensile strength
Total strength = 1208 KN | Total strength = 2940 kN.
HIGH SHEAR STRENGTH
Ordinary Bolts
(Old Method Unbrako Method
800 N/mm M12 Bolt 1300 Nimm? M12
Shear Strength = 40 kN | Unbrako Bott
Shear Strength = 66 kN
xtra Unbrako Shear
Strength = 26 KN less
wrenching space needed
Example (shown above) - against adjacent machine parts
Unbrako Screw requires 50% less space for clearance.
In counterbored screw application Unbrako Screws require
minimum counterbore since no wrench clearance
is necessary.SOCKET HEAD CAP SCREWS - ISO Metric
See Note
1
r—_
‘Thread Size
7—_t
Applicable or Similar Specifications:
Product BS 4168
DIN 912
Grade
DIMENSIONS AND TIGHTENING TORQUES - ISO Metric Threads
1s 4762
BS 6104 Grade
1S0 8908/1 Grade
se
Wore
Tread 2 | tong
‘Soe lived
BMed Piha Mac | Wile kT we
Ma 0s0 | 5.0 30 | 25 | 2 | 18 21} 186 16 142! 390 890
Me | a70 | 7.00 400 | 30 | 25 | 20 4s| 407 35) 310! 675) 1510
MS 080 | aso soo | 40 | 2 | 2 as | eat, 71 | 628| 11.10, 2480
Me | 1.00 | 1000 eo | 50 | ao | 2 | 160| 1420| 120 1060/ 1560) 400
Ms 125 | 1300 soo | so | 35 | 28 | 300| 3450 290 2570) 28.70 6400
Mio 1.50 | 16.00 sooo | 80 | 40 | sz | 770| 6820, 580 5130| 45.70, 10200
m2 | 175 | 18.00 | ya00 | 100 | 80 | 26 | 1250 | 12000) 1010 | 6940| 66.70) 14900
(ma) | 200 | 21.00 r400 | 120 | 65 | 40 | 2150 | 19000, 1610 14200) 91.30, 20400
mia 200 | 2400 seco | 140 | 60 | 44 | 3900 | 20200, 2480 2190.0) 126.00, 26100
(mia) | 250 | 27.00 yaoo | 140 | 6s | 48 | 4550 | 40a00| 3410 | a0200| 153.00) s4100
M20 250 | 30.00 2000 | 170 | 70 | s2 | 500 | 57500) 4880 43200| 197.00, 44000
| (22) 250 | 33.00 ze00 | 170 | 70 | s6 | s7o0| 77000| 6520 57700) 245.00, 54700
Mza | 3.00 | 36.00 za00 | 190 | 80 | 60 | 11000 | 97400| 8250 73000) 24.00 63400
Mer 3.00 | 40.00 2ro0 | 190 | 90 | 66 | 16500 | 146000 1238.0 110000) 374.00 43400
Maa | 350 | 45.00 | 30.00 | 220 | 100 | 72 | 22500 | 199000, 1688.0 150000 | 454.00 101000
Maz_/ 3.60 | 60.00 33.00 | 280 | 100 | 78 | 30500 | 270000 2287.0 202000 | 550.00 123000
Mas | 400 | 54.00 aso | 270 | 110 | o4 | 9500 | 341000) 2688.0 250000 | 664.00 148000
Meo 450 | 63.00 | 45.60 | 4200 | 320 | 130 | 96 | 62700 | 55500.0| 4700.0 |41600.0 | 889.00 198000
ALL DIMENSIONS IN MILLIMETRES. SIZES IN BRACKETS ARE NON-PREFERRED STANDARDS.
MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade 1. Thread and Grip Lengths are shown on Pages 8 & 9
Alloy Steel 2 Screws with lengths equal or shorter than listed in column ‘L
Heat Treatment Re 40-43 willbe threaded to head
Screw Size =M16 sig 3 Thead Class: 43 ond
. 4 ‘anation Diameter
Tene sength GOON? 1250? Sng temperte: °C SON
Yeld Strength 1170 Nimm*_ 1124 Nimm 6 Torques calculated in accordance with VDI 2230 “Systematic
Shear Strength 780.Nimm 750 Nimm* — caleuation of high duty bolted joints” with c 0.2 = 1080 Nim
‘Min. Elongation 92% 9% ‘and ji = 0.125 for plain finish and y= 0.094 for plated.‘SOCKET HEAD CAP SCREWS - ISO Metric
2600
“37.00
31.00
20.75
136.00.
25.75,
27.00)
22.00)
1550
1025
23.00
[2050 |
28.00.
1525
39.00
24.00)
To Hoad
10.00
20.00
To Head
ALL DIMENSIONS IN MILLIMETRESSOCKET HEAD CAP SCREWS - ISO Metric
ites
[1320
1155
{ize.0 =
i118 isis
1240 1640
105.0 145.0 165.0
120.0 160.0 180.0
99.0 139.0) 158.0 1790
1140 4840 | 1740 | 1940
905 3205 | 1505 1705
7080 748.0 168.0 | 186.0_| 2080
Bas 1245 1445 1645 | 1845
i020 142.0 162.0 | 1820 | 2020
760 116.0) 136.0 | 1560 | 1760
960 4360 156.0 | 1760 | 196.0
615 1015 1215 1415 | 161.5
840 1240 1440 | 1640 | 1840
1. Dimensional and tightening information for standard metric cap screws
‘on Page 7 and metric low head on Page 11.
ee |
—
[sat | T Ret (2x Nominal Dia) plus 12mm.
8D LG max Nominal length °L’ minus *T"
2028 2. Dimensions for LB and LG are calculated from the following formula
22. 129. 2070 LB min = Nominal length “L" minus (T + 5 pitches)
\—120__250__2080_ 3, Screws ordered to an intermediate length shall have a grip length equal
250 =___|_+100_| “to that of the screw of the next shortest length,SOCKET HEAD CAP SCREWS:
~ ISO Metric Micro Screws
‘Thread Size Applicable or Similar Specifications:
x Product 8S 4168
DIN 912
1s 4762
Grade BS6104 Grade 12.9
1SO 8981 Grade 12.9
DIMENSIONS AND TIGHTENING TORQUES - ISO Metric Threads
mia og0| 26) 18 | 14 | 9 | 6 | 127 | 020 | 18 018 | 19 | 709) 164
me oas| a0) 20 | 16 | 2 | 6 | 150| 029 | 26 | 022 | 20 | sa 200
qm7)oas| a0 | ar | 17 | 3 | 6 | 150| 095 | 31 | 026 | 29 | 110) a6
mia) oss | a4 | 23 | 18 | 9 | 6 | 150| 0 | 39 | 099 | 29 | 1900) 201
me oa | aa | 26 | 20 | a | 2 | 150| 060| 53 | 04s | 40 | 1550) 247
(M23) 0.40 40 29 23 4 15 2.00 0.95 84 o7t 63 2230 | 500
M25 0.45 45 i 34 25 4 15 2.00 ir 10.7 | 0.90 | 80 2590 | 580
qe) o4s| 45 | 92 | 26 | 4 | 15 | 200) 197 | 121 | 103 | 91 | 2060 | 640
ALL DIMENSIONS IN MILLIMETRES. SIZES IN BRACKETS ARE NON-PREFERRED STANDARDS.
(MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade 1. Thread Class: 4g 69
Alloy Stee! da: Transition Diameter
Heat Treatment Re 40-43 3.Working Temperature: -50°C—_+300°C
Tensile Strength 1300 Nimm* 4. Torques calculated in accordance with VDI 2230,
mim? “Systematic calculation of high duty bolted joints”
eld Strength 1170 Nim wih 0 0.2 = 1060 Nine and p = 0.125 fr plain rsh
sarsiongh, ‘reo land! = 0.094 for plated
in. Elongation
Length Tolerance (mm) |
en
owe | lear _|
: ri
ao | |
30 as
10SOCKET HEAD CAP SCREWS
- Low Head ISO Metric
SEENOTES
Xr
St
a
DIMENSIONS and TIGHTENING TORQUES - ISO Metric Threads
‘Applicable or Simi
lar Specifications:
Grade
BS 6104
Iso 898/1
7, +
Thread Size
Grade 10.9
Grade 10.9
Ma 70 | 47 148 | 28 | 2 | 9 | 38 | m6) 29 257 565 1270
M6 yoo | se 200 40 | a | 5s | 190 | 1150, 98 | 967 | 1900 | 2000
v8 130 | 92 | 24 | 50 | 2 | 6 | s20 | 2890 | 240 | 2120 | 2890 | sa70
mio eo 112 | 396 | 65 | @ | 8 | 640 | S660 480 | 2250 800 | 8540
mie tao | 142 428 | 80 | 86 | 10 1100 | e740 830 | 7950 | 5550 | 12470
me | eo | 182 | 476 | 100 | 44 | 12 | 2750 |2ese0 | 2080 | 18200 | 105.00 | 25600
20 so | 24 sor 125 | se | 14 | 5600 | 48700 | 4050 | 95850 | 164.00 | 96000
{ALL DIMENSIONS IN MILLIMETRES
‘MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade 1. Thread and Grip Lengths are shown on Pages 8 & 9.
Alloy Stee! 2. Thread Class: 69
Heat Treatment Re 39-99 adx Transition Diameter
Tensile Strength 1040 N/mm
Yield Strength 940 N/mm*
4. Working Temperature:
5. See Page 9 for Length Tolerance.
& Sizes M5 and larger are stamped U 10.8.
80°C
+300°C
Shear Strength 624 Nimm*
Min, Elongation
9%
forques calculated in accordance with VDI 2280
systematic calculation of high duty bolted joints”
with o 0.2 = 800 Nimm? and p = 0.125 for plain finish
and |! = 0.094 for plated,SOCKET HEAD CAP SCREWS
~~ 1936 Series BA, BSW and BSF Threads
Thread Size
: ‘Applicable
2 Grooves from 2BA and */." up to ‘/." Diameter specced
3 Grooves for” diameter and Over BS 2470
DIMENSIONS AND TIGHTENING TORQUES - BA, BSW and BSF Threads
is
Perch
th AM dae
ser | 0.140 o.1026
s29 | o161 ona
azo | _o187 1282 120
#31 | 0219 0.1460 90
ses | o29 1617 240
sia_| 0.250 0.1854 350
sia) 0si2 02130 #90
ze2 | oai2 0.2967 800
zs4_| 0375 0.2682 1440
BSW BSF BSW | esr BSW
40) -) O3t@ ‘0.1480 “) pon
za) 32} 0312 02185 44) 50) 33
20, 26) 0375 02780 1aa| at
wee.
i] 22] 04a? ‘0.3485 By) 6
18 20) ose 04180 | 0375 0) 3
14) 1a) 042s oes | 0437 7%) Bt
12/18/0760 05520 | 0.500 1
sie | 12) 16| ose oszs | osc | a 19 | 116
ve | 1) 4) 87s 0.8800 0.625 Me 193 138
a | 10) 12) 1.000 0.8280 | 0750 ag 308 223
me | 9) an] tres 0.9630 | 0875 |e 488360
1 wo} 3312 1000 | 1.000 ay 369
le | 1.500 s2050 | 1125 ay 993700
We 1.750 13700 | 1.250 988,
1% 1875 15050 | 1375 a 997
ts 2.000 ‘.6400 | 1.500, 5
1% 2.250 1.7500 | 1.625 1
tm 2.500 toto | 1750 4%
2 |ay 2.750 2.1800 | 2000 | _t%
‘ALL DIMENSIONS IN INCHES.
(MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade Alloy Stee! 1. For body and thread lengths see pages 14 & 15.
Heat Treatment Re 39-43 2. Thread Class: BA - Close
Screw Size 50.500 30.500 BSW and BSF - Medium
Tensile Strength 190,000 Ibfin? 180,000 Ibtfin® : Transition Diameter
Yield Strength 170,000 Ibn? 162,000 Ibtint “50°C +300°C
ShearStrength 114,000 Ib/in” 108,000 Ibtint
Min.Elongation 9% 9%SOCKET HEAD CAP SCREWS
- 1936 Series UNC and UNF Threads
t
Thread Size
2 Grooves from No.10 up to */" Diameter
3 Grooves for %.” diameter and Over
DIMENSIONS AND TIGHTENING TORQUES - UNC and UNF Threads
0.188
0.208
0.228
0270
ost2
osas
os75 0.250 153
RBBSRSRE
0.4s7 T osiz 288
sez 037s 468
hs o6es 0.4805 | 0.497 750 |
Ye 0.750 0.500 1150
oo 18 ost 0.8225 | 0.562 1650
oh 18 087s 0.8880 | 0.005, 2280
% 16 1.000 0.820 | 0.750 9680
% 4 1128 0.9630 | 0.875, 5750
1 12 1312 4.1100 | 1.000 7880
% 12) 1800 +2350 | 1.128 12500
% 2 | 1780 1.8700 | 1.250 17500
1% 12 | 1875 1.5050 | 1.375 23200
Me 12) 2000 +8400 | 1.500 3040.0
1% 12 | 2500 19100 | 1.750 | 1% | 49600
2 12_| 2750 21800 | 2000 | 1% | 74900
{ALL DIMENSIONS IN INCHES.
MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade Alloy Stee! 1. For body and thread lengths see pages 16 & 17.
Heat Treatment Re 99-43 2 Thread Class: 2A or
‘Screw Size <0.500 30.500 EN
Tensile Strength 190,000 Ibffin’ 180,000 thir? 3. das Transition Diameter
Yield Strength 170,000 Ibfin’ 182,000 Ibn’ 4. Working Temperature: -50°C +300°C
Shear Strength 114,000 Ibt/in® 108,000 Ibi? _5. Torques calculated in accordance with VDI 2230
Min. Elongation 9% 9% “Systematic calculation of high duty bolted joints”
with 0 0.2 = 185 K.S.I. and = 0.125 for plain finish
and ys = 0.094 for plated. Above 0.625" dia
002=140KSI.
%e
BBeeSOCKET HEAD CAP SCREWS
~~ 1936 Series BA, BSW and BSF Threads
1.75) 1375
1.00 1.000 1800
1.250
137
1.198
1.000 2.00)
a 5.125, 3.25
750 3000 300
2375 3.125
2000 2000
‘20002000
2000, 20)
‘Sizes tothe let ofthe
hhoavy lines will bo
threaded to head.
‘ALL DIMENSIONS IN INCHES.
BSW and BSW Thread Lengths of Large Diameter Screws
‘Size ota lato ne
heavy ines wil bo
treadna to heaSOCKET HEAD CAP SCREWS
~~ 1936 Series BA, BSW and BSF Threads
Fra paso
al
508 Note 2.
Ts) 728
7.000) 7.000
om75| 6875
750| 6750
‘6an0| 7.00
NOTES:
1. Dimensional and tightening information on Page 12.
2 Sizes longer than those between the heavy lines shall have a grip length calculated thus -
Lig = L - Basic Thread Length,
3. Tolerance on the grip length shall be +0 -2¥.pitches.
4 Tolerance on the thread length shall be +2 pitches - 0.
5. Screws up to and including 1" dia. ordered to an intermediate length between the heavy lines shall have a grip
length equal to that of the screw of the next shorter length.SOCKET HEAD CAP SCREWS
~ 1936-1960 Series UNC and UNF Threads
GRIP LENGTH - UNC and UNF Threads
so [0 m0
825 y| 25 | 07s |r 25 ]__
tes bes oe 408 135
m= ‘2a 7501001250730
70 ‘z0} 70) 020] L—|
$50 0
“3 rare | aoe |.va| ae SRST
‘Be a8) ae sia tara tam one SoH DEM]
“ba, a3, re) avs tar sans tars ses aars ase oe 2
$20, 50 ton 100018001809 200 20m 250 2800 S00 TOAD
esac ec a2 sansa ars ase TAN TTS
£0 Lo 20 te sna an 2s ao sr 20 a: en 4 «am 4
fs es eh ass ten aes ates onps 2m aes assem gem cre
ea) 0| 70|t 0130] s0| 225220220 |sa0| aon] Sao) 270] az
‘875) 875, .875| 1.625|1.625] 1.625|2:375 | 2375 2.75 3.125) 3 125, 3.125) 3875|3.875)
Seats 730] 750.750] 1.500) 1.500 1.500|2.250 | 2250 2.250 3.000] 3.000) 3.000, 3.750).750)
eat toed 1.000 +000) 1.000 .009/2.009 2000| 2.000" 2.000) '.000| 8 000/809]
$20 020% sor 20n 200 20% 20 3 330
200200120 | 100 2.0] 200) 2000 2.00) 30000
ALL DIMENSIONS IN INCHES.
“Avallale in 1960 Series only
UNC and UNF Thread Lengths of Large Diameter Screws
yeu
Lune
ee
{anu
4 zenwonmne
yuu] ,emmoneie
SUE | can
16SOCKET HEAD CAP SCREWS
~ 1936-1960 Series UNC and UNF Threads
For sizes longerthan
shown between heayy tines
‘908 Note 2
5125, 5.125
“4500/6250
4425) 4005
4500, 4500
“000/000
400,000 12000 12000) 14000 EES)
1926 SERIES
Length
rertrto2/ [Owe 2706 | Overe
NOTES:
1. Dimensional and tightening information for 1960 Series on Page 18 and 1936 Series on Page 13.
2. Sizes longer than those between the heavy lines shall have a grip length calculated thus -
Lg = L - Basic Thread Length.
3, Tolerance on the grip length shall be +0 - pitches.
4, Tolerance on the thread length shall be +2%pitches - 0.
5. Screws up to and including 1” dia. ordered to an intermediate length between the heavy lines shall have a grip
length equal to that of the screw of the next shorter length.‘SOCKET SET SCREWS
Torsional and axial holding power - seated against
steel shaft. Based on recommended seating torques.
ISO Metric Threads
19
2
25
29
58
58
n
170
250
420
670
930
12.00
15.00
18.00
21.00
M20 2300
26.00
Mos 29.00
100
100
200
36.0
87.0 | 1,000
1650 | 1,500
290.0 | 2000
430.0 | 2,500
6200 | 3000
6200 | 3500
11326.0 | 4,000
2,400.0 | 5,000
52000 | 6,000
7.2000 | 7,000
ALL DIMENSIONS IN INCHES.
NOTES:
‘Tabulated axial and torsional holding powers are typical strengths and should be used
accordingly, with specific safety factors appropriate to the given application and load conditions.COUNTERSUNK SOCKET HEAD SCREWS.
Moder equipment and machinery requires stronger
‘more reliable joints to hold their parts together - and
stronger more reliable fasteners. The requirement for
dependability also holds true for fasteners used to
hold thin section metals together in applications that
also require a neat smooth surface,
That's why Unbrako countersunk screws are so
widely used for fastening of plates, strips, mouldings,
and other thin section parts. Unbrako countersunk
screws provide reliable fastening and a smooth,
attractive, flush mounting that enhances the
appearance of the product on which they are used,
Unbrako countersunk screws provide more
‘clamping force because they are manufactured from
high grade alloy steel, and held to exacting tolerances
to ensure the highest degree of dimensional
uniformity. The closely controlled head angle assures
flush seating, and close all-round head contact
by initially contacting at the upper portion of the
head bearing area in the countersunk hole.
Closely controlled threads mean tighter and more
secure fits, and stronger assemblies. Deep accurate
non-slip sockets provide maximum key engagement
for full tightening without marring the surrounding
surface,
Unbrako countersunk screws are available with
either plain or plated finish. Stainless steel screws are
also available.
Deep, accurate socket for uniform wrenching power and
high maximum torques.
Precision forged head for continuous grain flow and
maximum strength,
Uniform under-head angle gives maximum contact with
side walls.
Radiused-root runout increases fatigue life.
Fully formed radiused threads rolled to maintain continuous
grain flow for greater tensile and fatigue strength.
Heat treatment in a controlled atmosphere for maximum.
Uniform strength and surface integrity without brittieness
or decarburisation
19COUNTERSUNK SOCKET HEAD SCREWS:
~ ISO Metric
Head Angle
(See Note 8)
Manufacturer's optional machined socket.
DIMENSIONS AND TIGHTENING TORQUES - ISO Metric Threads
hate
Leh noe
672
ae
ie
348
702
zaao
ex
186
2.48
3.10
372
4.96
6.20
2.08
3.98
498
597
797
997
1873
19.87
oe
See Note 1
1.
‘See Note 1
THREAD
SIZE
‘Applicable or Similar Specifications:
Product BS 4168
DIN 7991
BS6104 Grade 129
180 898/1 Grade 12.9
Grade
14
26
51
33
210
41.0
20
25
3.0
40
50
60
14
a4
68
110
2a0
55.0
2688
2024
3360
2367
2667
2987
i197
13.98
15.98
7.44
a2
8.80
80
100
100
95.0
1500
237.0
71.0
1120
170
1320
2100
96.96
40.22
37.38
4042
281
3561
3581
3881
17.98
19.96
21.98
2398
9.48
toa
13.82
1422
‘3000
4250
5640
6600
255.0
360.0
4770
585.0
720
120
140
140
‘340.0
4200
637.0
748.0
ALL DIMENSIONS IN MILLIMETRES. SIZES IN BRACKETS ARE NON-PREFERRED STANDARDS.
(MECHANICAL PROPERTIES
Material Unbrako High Grade Alloy Stee!
Heat Treatment Rc 39-44
Shear Strength 630 Nimm*
Min.Elongation 9%.
NoTEs:
1. For overall and thread lengths see pages 22 & 23.
2. ~ Maximum theoretical sharp comer.
3. Al - Absolute minimum head diameter.
4. - Transition diameter.
4g 69
-50°C +300°C
7. Torques calculated in acoordance with VDI 2280
“Systematic calculation of high duty bolted joints”
with 6 0.2 = 720 Nimm? and p= 0.125 for plain finish
and 4 = 0.094 for plated,
8, For sizes up to and including M20 Head Angle shall
bbe 92"/90°, over M20 Head Angle be 62°/60°.
NB. Because of their head configurations, countersunk head screws may not meet the minimum ultimate
tensile load for property class 12.9, specified in table 6 OF BS 6104: Part 1: 1981. They are nevertheless
required to meet the other material and property requirements for property class 12.9 in BS 6104: Part 1COUNTERSUNK SOCKET HEAD SCREWS
~ BA, BSW and BSF Threads
——
‘See Note 1
DIMENSIONS AND TIGHTENING TORQUES - BA, BSW and BSF Threads
479
431
365
348
ata
282
254 2962 |
BSW BSF sw
4) - 1250] the
2a) 32 ae | 275
20 | 25 ee | 950
se | 22| a4 ae | 2170
en
ve) 0] 72 Tg) 280,
1418) 831 me | 300) 42 32
12| 16| 950 5000 sie | 720| 85 66
72) 16 | 7.069 5625 Sie | 1080 a7
1) 1a] 187 6250 ay | 1380 108
10) 12 | 1425 7500 sls | 1380 105
a) 11) 1682 8750 ip | 8380 266
8) 10| 1.900 1.0000 me | 5080 401
te | 7) 9 2198 11250) we | 7180 5 572 122500 130200
ama | 7) 9| 2376 41.2500 sig [10130 ‘502 155600 164309]
‘ALL DIMENSIONS IN INCHES.
(MECHANICAL PROPERTIES ‘NOTES:
Material Unbrako High Grade Alloy Steel 1. For overall and thread lengths see page 24.
Heat Treatment Rc 89-44 2. A - Maximum theoretical sharp comer.
Shear Strength 96,000 Ibffint 3. Al - Absolute minimum head diameter.
Min. Elongation 9% 4, da - Transition diameter.
= Close
= Medium
60°C +300°C
NB. Because of their head configurations, countersunk head screw tensile loads, are based on 160,000 lbffin’.COUNTERSUNK SOCKET HEAD SCREWS:
~1SO Metric
BODY AND GRIP LENGTHS - ISO Metric Threads
LBMex|Toveed | 145 | 195 | 245 | 005
16. Max 70 | 220 | 27020
(B.Mex [Towed | 115 | 165 | 21s) 28s us wes
16M 450 | 200 | 250 | 900 | 350 | 400 | 450 00 |
To Head 140 | 19.0 24.0 340 39.0 x 54.0 640
10) 200) 280 380) 490 seo | 680
ue ToHead | 16.0 21.0 31.0 36.0 510 | 610
210280 30) 410 560 | 680
we Toteat | 1576 | 2076 2 | 075 4678 | 557
geo | 270 | 0 | 970 seo | 620
= Tovesd | 205 | 255 aos | S05
230 | 920 130580
TeHeed | 202 32452
T 200 “0 540
ToHeed 300) 400
| 400500
250” | 380
t— 360 | 460
wa
a
Ms
ToHesd 205
420
ALL DIMENSIONS IN MILLIMETRES,CCOUNTERSUNK SOCKET HEAD SCREWS
- ISO Metric
167
122.0
1105
1180
1052
940 1140
800 | 900 | 1009
900 1100
7eo | 960 | $60 | 1060 | 1260
60 | 980 | 1050 | 1160 | 136.0
05 | 705 | 895 | 095 | 1195 | 1395
20 | 920 | 1020 | 1120 | 1920 | 1560
655 | 755 | 855 | 955 | 1155 | 1355
70 | 680_| 80 | 1080 | 1280 | 1480
os | 715 | as | as | 1118 | 1015
740 | 840 | 940 | 1040 | 1240 | 1440
550 | 650 | 750 | 850 | 1050 | 1250 1650
700 | ad0 | 00 | 1000 | 1200 | 1400 1800)
NOTES:
1. Dimensions and tightening information on page 20.
2 Dimensions for LB and LG are calculated from the following formula.
Tet = (2x Nominal Dia.) plus 12mm
LG. max ‘Nominal length ‘’ minus ‘T
LB. max Nominal length ‘L' minus (T+ 5 P)
3. LG is the max. distance from top of the head to the first complete thread. LB is the
max. longth of unthreaded portion measured from the top of head.
4, Concentric. - body diameter to thread within 0.1mm per 20mm of body length
TLR. taken directly under the head when screw is held by the
full threads closest to the head of the screw.
5, The axis ofthe conical bearing surface shall be parallel tothe axis of the body within Y.°COUNTERSUNK SOCKET HEAD SCREWS
~ BA, BSW and BSF Threads
‘THREAD LENGTHS FOR STANDARD SCREW DIAMETERS - BA, BSW and BSF Threads
BBA 1
/6aA a|a
58a me
con TT} at]o
3BA vfafafta
2BA ttatada
1BA Tht Tt] |
08a tfr [ia | a | sme] a | te | a |
o TT4
Me afafa
tw tf a | | am] ia] som | ate | t20 | me | atm | 2
Te Te | ae] Te] me te | tae | ae | Tee | ae te | 2 | Oe
* ay) au] ay tu [ate | ave fam | as fate | 2 | ame | 2m 2m
he [am | tay | tse | t20 fate | ate | ame | tau | ate | 2 | ame | 2 2a
cs THe [tie | te ptm | i | tie | 2 ie | 2m Qin | Be | ou ee
e i ante ate | as | tf am | ate | 2 | 2m | 24 ain | 2%) 2% 2m 3
cS than those listed sa | a | te [ta [am | 2 | 2m | 20 ai | 20 | 2m 2m 8
% willbe threades 2)2)2)2)2 | 2m a 2h | Be | 2 ae
m ‘tohead. au | aie | 2 | 2m | Bue Bu ain | 2 | 2% ae 3
1 2» | aie | Bie | ate | Bi | De ain | a0 | 24 2m 3
1 Bu [2% | Be | Be | Ba |B Be S
1% 333 sisi3s_3 3
‘Thread Length Tolerance -0 +2'/ Pitches
24
‘ALL DIMENSIONS IN INCHES.
NOTES:
1. Dimensions and tightening information on Page 21.CCOUNTERSUNK SOCKET HEAD SCREWS
- UNC and UNF Threads
r
pd
Applicable Specifications:
Product BS 2470
ANSIB 18.3
DIMENSIONS AND TIGHTENING TORQUES - UNC and UNF Threads
Wom
00 | 26
0 | 44 33
‘he 67 50
‘he 89 6
Sieg | 130 90
307 1980
1640
ant 1900
531 2500
781 3750
206 ears
938 5000
5250
7500
8750
1.0000
te) 1.168
16 | 1.438
14) 1688
12_| 1938
656 3125 |
198
234
24
24
296
488
540
Sea | 160 120
Se | 300 20
ty | 440 330
ise | 100.0 750
She | 2100 187.0
"lee | 9800 2850
% | 6000 4500
Sie_| 990.0 697.0
% | 18000 1350.0
‘| 32000 2400.0
Phe | 4000 4050.0
5% 82000 e150
‘ALL DIMENSIONS IN INCHES.
(MECHANICAL PROPERTIES
Material
Heat Treatment
‘Shear Strength
Min, Elongation
Re 39-43
96,000 Itffin?
9%
Unbrako High Grade Alloy Stee!
NOTES:
1. For overall and thread lengths see page 26.
2. A. - Maximum theoretical sharp comer.
3, Al - Absolute minimum head diameter.
4, da - Transition diameter.
S.Thread Class: 3A.
6. Working Temperatur 60°C +300°C
7. Torques calculated in accordance with VDI 2230
yystemalic calculation of high duty bolted joints”
with 0.2 = 100 K.S.L. and p= 0.125 for plain finish
and 4 = 0.094 for plated.
NB. Because of their head configurations, countersunk head screw tensile loads, are based on 160,000 lin’.‘COUNTERSUNK SOCKET HEAD SCREWS:
- UNC and UNF Threads
‘THREAD LENGTHS FOR STANDARD SCREW DIAMETERS - UNC and UNF Threads
Length
‘Applicable Specifications:
BS 2470
ANSIB 18.3
1 1%) 1a 1%) 2 [2% | 2%) 2%) 3
4h Mh 44 5
“cp Length
050 075
025 | 062
0.25 0.62
(0.25 | 0.62
050
0.50
(050 750 | 200
0.38 133 188 1.88
1.82. 1.62 | 212
4.25 | 178 1.76
138 | 138 | 1.68
4.00 | 1.50 | 1.50 |
a2) 442) 1.62
1.00 | 1.00 | 1.00
‘Sizes shorter
than those listed wil
be threaded to head,
‘ALL DIMENSIONS IN INCHES.
we dae
0.060"
0.009"
0.10"
NOTES:
1. Dimensions and tightening information on Page 25.
2. Tolerance on the grip length LG shall be +0 - 2 pitches.
[Ome
a9
0.120"
0.200"BUTTON HEAD SOCKET SCREWS
Unbrako button head screws are ideally suited for use
in materials too thin to countersink and in non-critical
loading applications. Their low head profile gives
them smooth, aesthetic appearance, and their deep
accurate sockets ensure non-slip wrench engagement
to prevent marring of the surface in which they are
installed,
Unbrako button head screws are made from high
grade alloy steel and every manufacturing operation is
closely controled. Heads are forged for greater
‘strength and full formed radius-root rolled threads
assure close tolerances, maximum strength and
superior fatigue resistance. Deep accurate sockets
allow full tightening, and customised heat treatment of
each heat of steel ensures maximum strength and
hardness without britieness.
Unbrako button head screws are available in plain
cr plated finishes. Stainless steel screws are also
available.
Unbrako flange button head screws in Metric are
also available. Please refer to our separate brochure
for technical data.
Deep, accurate socket for uniform wrenching power and
high maximum torques.
"— Low head profile for enhanced in sity appearance.
Precision forged head for continuous grain flow and
maximum strength,
AWAY
WAAAY
\\\
Radiused-root runout increases fatigue life.
Fully formed radiused threads rolled to maintain continuous
grain flow for greater tensile and fatigue strength.
Heat treatment in a controlled atmosphere for maximum.
uniform strength and surface integrity without britieness
or decarburisationBUTTON HEAD SOCKET SCREWS - ISO Metric
|_—____.
‘See Notes 3 & 6
jo
DIMENSIONS AND TIGHTENING TORQUES - ISO Metric Threads
Applicable or Similar Specifications:
Product BS 4168
Grade 886104 Grade
1$0 898/1 Grade
129
129
et
ms | 050) 570 s60| 3s1| 165 | s8| so | 20 14) w | 11 9 | 528
ms | o70| 760) 470 | 393 | 220| 8| a0 | 25 | a4 9 | 26 22 | o22
ms | 080 | 950 570 | 450) 275 | 50| 520 | 30 68 6 | si 45 | 1490
ws | 100 | 1080) 60 | 500 | aa | 20| soo | so 110 o | aa 7 | 21.10
ma | 125 | 1400 920 | 700} 440 | 80 | 750 | 50 | 280 249 | 210 186 | 3840
mio | 150 | 1750 | 1120 | a2 | sso | 0 | 100 | so | sso | 40s | s10| 953 | 6090
mz | 175 | 2100 | 1370 | 1050 | 660 | 20 | 1100 | 80 | 950 8 | 710 630 | 860
{ALL DIMENSIONS IN MILLIMETRES.
(MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade Alloy Stoo! 1. Thread Class: 49 69
Heat Treatment Rc 99-44 2.da - Transition diameter
ShearStrength 630 N/mm? 3. Full thread length to within 2% pitches of head
Min. Elongation 9% 4.Working Temperature: -50°C 430°C
5. Torques calculated in accordance with VDI 2230
“Systematic calculation of high duty bolted joints”
with 6 0.2 = 720 Nimm and p= 0.125 for plain finish
and 4 = 0.094 for plated.
6. Longth tolerance = +0.25mm.
NB. Because of their head configurations, button head screws may not meet the minimum ultimate tensile load
{or property class 12.9, specified in table 6 OF BS 6104: Part 1: 1981. They are nevertheless required to
‘meet the other material and property requirements for property class 12.9 in BS 6104: Part 1
28BUTTON HEAD SOCKET SCREWS
- BA, BSW and BSF Threads
THREAD
SIZE
Applicable Specifications:
Product BS 2470
L ‘mn r
cee Se
ie fe
‘Se (BA Aan BM, Mix | DMac HMax 1) fx Ref. | 1) Nom. A A BA
con | 479 | 219 | 1102) 1002) 02 |.050 | 500 015] .140) 500| The | 7 5 | 1090
sea) 431 | 238 | 1260) 1460) 121 | 066 | 500 | 015] 146) 500| Se) 11 eo | 1990
son 985 | asa sat7 .t617| 101 |.o70 | a5 | 015 | 160) 625 Su | 18 1201760
sen) o48 | ata | tore) tor4| 40 |.oe7 | 750 015] .100| 780] % | 20 vo | 210
aoa at4 | 961 | 1050) 2150) 100 |.101 |1.000| 020/216) 1.000| te | 96 zo | 00
cea | 254 | aa7| 2062) 0760) 202 | 100 |1000| 21 | 254] 1000| %e | 75 sco | so70
ssw | esr ssw aSW BSE
%e | 26 | 32 | 361.1975] 2175] 186, 101 |1.000| .cao| 216| 1.000) % | s2| 36] 24| 27) 27a0| si20|
wm | 20| 26 | 497.2500) 2000] 232 | 32 |1.000| 031) 256 | 1.000] Se | 00] a9) 60) 67 | 5130] 710
Sue | 1022 | 547 | 9125) 9520] 260 | 108 |1.000 | 0a1| at4| 1.000, %e | 165| 177| 124 | 199 | 440 ooeo|
| 16| 20 | .686|.9750| 4150] .304| 199 |1.500| .031| 973| 1500) %e | 24| 26| 18| 19 | 12600| 13400]
Tha | 14) 18 | .760| 4975 4700) 940 | 292 |1.500| 031) 417| 1500 % | 39) 42| 29| 31 |17100| 18500]
Me | 12 | 16 | .875| 5000 | s600| 414 | 265 2.000 | .046| 406 | 2.000, Me | se) 63| 43 47 |22200|24200]
5 | 11) 14 | 1.000 |.6250 | 6850) 486 | 331 2.000| .062| 528 2000 % | 118) 125| 68| 95 |36400| se900]
3% | 10 | 12 |1218|.7500 | 100] 613 | 398 2.000 | 078 | 670| 2000 | 210 220| 157, 165 |53700| 56400]
‘ALL DIMENSIONS IN INCHES.
] Length Tolerance NOTES:
Up toand 1.Thread Length _ - Screw lengths equal to or shorter
sexmow Ysa ene Ten ct ed a
I r 201 For screw lengths longer than 'L’, ‘T' designates the
roa re rninimum thread langih. The meidmum thread length
z |e | sana is not specified.
«| 30.062" 2.Thread Cass: BA = Close
BSW and BSF = Medium
(MECHANICAL PROPERTIES 3.da_- Transition diameter.
Material Unbrako High Grade Alloy Steel 4 Working Temperatur
Heat Treatment Ro 39-44
Shear Strength 96,000 Ibint
Min. Elongation 9%
NB. Because of their head configurations, button head screws tensile loads, are based on 160,000 Ibffin’.
“50°C -+300°C.BUTTON HEAD SOCKET SCREWS
- UNC and UNF Threads
THREAD
SIZE
yt
Applicable or Similar Specifications:
BS 2470
ANSIB 18.3,
Naima Tightening Trques
mein
voi | ed
i in LT
Nan Uwe ne | WN e_
120] 820 ‘me | 8] 10] 66) 75| 960) 100
1250 1480 She | 190) 14| 97) 100, 1260| 1210
1380 .1580) Sigg | 16.0) 19 120) 14.0 1440 1620
1640 .1940, Yaz 30.0) 32] 22.0) 24.0 2220 2240
100 | 2200 ‘hy | a0) 61| 30) 200) 2700 e180
2500 | 2900 She | 100.0) 120] 750| 90.0 5790
| Ibfft. |
199 | 1.250] .031 | .373 | 1.000] "ae 430| 285] 322 12400|14000]
875 265 |2.000| 046 | 406 2.000) Fig | | 1050 687) 787 | 22600 25600]
:
.
656
4.000 2.000/ 062 528 | 2.000, % 2000 1350/1500 36000 40800
1218 2.000 .078 670 | 2.000, "ip 2400 2670 53200 59300
‘ALL DIMENSIONS IN INCHES.
Length‘ Tolerance NOTES:
Uptoand | yoerance 1. Thread Length = Screw lengths equal to or shorter
Ineluding than listed in column ‘L' will be threaded to head.
+ 2018" For screw lengths longer than ‘L’, ‘T’ designates the
z 40.081" -0.016" minimum thread length. The maximum thread length
o 0.091" is not specified.
0.062" 2. Thread Class: 3A
3.da - Transition diameter.
4. Max. Working Temperature: “50°C +300°C
MECHAMICAL RROPESTTIES 5. Torques calculated in accordance with VDI 2230
Material Unbrako High Grade Alloy Steel “Systematic caloulation of high duty bolted joints”
Heat Treatment Rc 39-44 with o 0.2 = 100 K.S.1, and p = 0.128 for plain finish
Shear Strength 96,000 lbffin® and 4 = 0.094 for plated,
Min.Elongation 9%
NB. Because of their head configurations, button head screws tensile loads, are based on 160,000 lbffin’.FLANGE BUTTON HEAD SOCKET SCREWS
Unbrako flange button head screws allow the covering
of large diameter holes in sheet metal. As the large
underhead surface pressure by area is low, this fastener
can also be used with softer materials without harm
or damage.
Flange button heads ideal to fix strips, cover plates
and sheet metal housings.
‘The redius on the button head presents a streamlined
profile, virtually eliminating the sharp edges which could
‘occur with a bolt and washer assembly.
Unbrako flange button head scews are available with
metric threads and
Deep, accurate socket for uniform wrenching power
land high maximum torques,
Flange facilities greater load spread and streamlined
appearance
Precision forged head for continuous grain flow and
maximum strength
Rediused root runout increases fatigue life
Fully formed radiused threads rolled to maintain
‘continuous grain flow for greater tensile and
fatigue strength
Heat treated in a controlled atmosphere for maximum
Uniform strength and surface integrity without brittleness
or decarburisationFLANGE BUTTON HEAD SOCKET SCREWS - ISO Metric
Applicable or Similar Specifications:
BS EN ISO 8698/1 Grade 12.9
DIMENSIONS AND TIGHTENING TORQUES - ISO Metric Threads
max,
Hox.
o70
0.80
0.90
120
130
178
240
185
220
275
330
440
550
660
3.00
420
520
5.60
750
10.00
11.00
Length Tolerance
[ALL DIMENSIONS IN MILLIMETERS.
Upto and
‘Screws Over | eioaing
Tolerance
fo.16!
7 z 0031" 0016
z e
$0081
$0082"
MECHANICAL PROPERTIES
Material Unbrako High Grade Alloy Stee!
Heat Treatment Rc 39-44
NOTES:
Thread Class: 4g 69
9. da = Transition diameter.
Full thread length to within 2% pitches of head
Working Temperature: 80°C +300°C
Length tolerance =40.25mm,
TTorques calculated in accordance with VDI 2230
ystornatic calculation of high duty bolted joints
with 00.2 = 720 Nimm and ys = 0.125 for plain finish.
‘Because of their head configurations, flange button head screws may not meet the minimum ultimate tensile
load for property class 12.9 specified in table 6 of BS EN ISO 898/1. They are nevertheless required to meet
the other material and property requirements for property class 12.9 in BS EN ISO 898/1SOCKET SET SCREWS
In contrast to other types of fasteners, sot screws are
primarily used in compression. They must hold fast
against three types of forces, torsional (rotational,
axial (lateral movement) and vibrational. To be
effective, socket set screws should produce a strong
clamping action which resists the relative motion
between tho assembled parts, because of the
‘compression developed by tightening the set screv.
Since holding power is proportional to seating torque,
the tighter you can seat the screw, the higher the
‘compression force will be.
But there is a limit to how much you can tighten the
average set screw. If you're not careful, you'l ream or
‘rack the socket, or strip the threads. So you're never
sure if the screw is tight enough, and whether it will
stay tight.
But you can be sure that Unbrako set screws will
‘stay put’ because you can tighten them until the key
twists of, with no damage to the screws. Unorako
recommend tightening torques as much as 40%
higher than other set screws, giving you extra holding
power and additional safety and reliability.
Unbrako socket set screws hold tighter because
they are stronger than other set screws. The superior
strength and dimensional uniformity of Unbrako set
screws permit use of consistently higher seating
torques than with other set screws. Consequently you
can often save money because you can reduce the
size or the number of set screws you require in your
assembly.
Here are some of the reasons why Unbrako
set screws are so strong and stay tight. Unbrako set
screws are made of high grade alloy steel and
heat treated to a minimum hardness of Rc 45
(Stainless steel set screws are available). Deep
accurate sockets give more key engagement for
extra wrenching areas. Radiused socket comers
minimise points of weakness where cracks may start.
Distribute stresses. Fully formed rolled threads
provide greater strength and resistance to stripping
Controlled heat treatment assures uniform hardness
without brittleness.
Unbrako socket set screws are available in knurled
ccup, cone, half dog, flat and plain cup point styles in
plain or plated finishes. Stainless steel set screws are
available in plein cup points only.
‘Accurate control of socket depth gives you more wrench
Heat treated alloy steel for maximum strength without
engagement than other screws; permits full tightening
without reaming or cracking the socket
Threads are formed with the closest possible fit without
selective assembly; give maximum cross-section for
strength,
brittleness or decarburisation.
Controlled root radius doubles fatigue life of threads by
reducing stress concentrations and avoiding sharp
comers where failures may start. Contour following flow
lines of rolled threads provide extra strength and
preventing stripping,
Radiused socket comers prevent cracking as Unbrako
socket set screws develop high tightening torques.
‘Acourate plating, when required, insures precision fit and
‘maximum corrosion protect
Counterbore knurled cup point - exclusive Unbrako
self-locking point provides greater vibrational holding power
than other knurled points.SOCKET SET SCREWS - ISO Metric
‘See Note 1
1 THpEAO.)
‘ue
se,
wae
Knurled Cup Point Plain Cup Point
1SO Metric Threads
DIMENSIONS AND TIGHTENING TORQUES
‘ALL DIMENSIONS IN MILLIMETRES. SIZES IN BRACKETS ARE NON-PREFERRED STANDARDS.
(MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade Alloy Stes! 1. Comer of recess must have fillets to minimise stress concentrations.
Hardness rc 45 Minimum 2 Thread Class: 69
3.Working Temperature: -50°C—-+300°C
‘4. Sorews with length L or below will have half dog point H.
Screws with lengths above L will have full dog point HL.
5. Torques calculated at 75% of the torsional shear strength of the
respective Unbrako wrenches.
6. For torque and axial holding power see pages 36 and 97.
7. Micro size Plain Cup Point are shown on page 38.rite
ae
eK - Soo See Note 1
x Fd [fom
ne
Cone Point Dog Point
Flat Point
‘Serew Diameter |
'Serow Diameter (Cone Point
50 80
+ Pant
20 120 ad
120280 Frain Cup‘SOCKET SET SCREWS
- UNC, UNF, BA, BSW and BSF Threads
[ mupeso_|
ke
Knurled Cup Point
|
JL
ree
Half and Full Dog Point
BSRRBRRgsses gers
3. Working Temperature:
4 “denotes Plain Cup only.
BSW and BSF - Medium
UNC and UNF - 3A
“50°C
+300°C
5. For torque and axial holding power see pages 38 and 38.
6 Inclined
when inclined angle is 118°.
he 1% 18 Ve 319
uy " 18 Ss 362
Me 10 18 ty 440
7 ° 14 Ye 518
1 8 2 hs 504
‘a zi 2 a 675,
1a 7 12 Ms 758
1 6 ® % 898
tb 6 1 | We wn
‘ALL DIMENSIONS IN INCHES
neous moras a
Material Unbrako High Grade Alloy Stee! 1- Comer of recess must have fillets to minimise stress concentrations,
Hardness pos Minimum " 2. Thread Class: oA = ieee
ie is 90°, except when length equals diameter or lessCone Point Flat Point
SERERE8EERRRE
‘Applicable or Simla Specfications:
UNCIUNF
BS 2470
ANSIB 18.3
BABSWIBSE
5 2470THE WORLD LEADER
Suprabhat Industrial Estate,
Outside Dariyapur Gate,
Bardolpura Corss Road, Madhupura,
Ahmedabad-380004
Phone:(+91) 80000 03330
Fax: (000) 000 00 00 0
Email: hardik@boltnutindia.com
Email: unbrakosales@unbrako.com / Website www.unbrako.com192
270 | 938
500 | 625 |
750 | 937
ro00 | 1250
1560
1500 | 1875 ‘2520
wso | 2190 ‘3030 4370 e120
2000 | 2500 3500 5000 7o00__| 8000
2500 | 3125 4375 e250 | 7500 | a750 | 10000
3000 3750 15250 7500 | 9000 10500 | 12000
35004375 120 750 | 10500 | 12250 | 14000
Good results have been obtained with a factor of 1.5-2.0 under static load conditions (i.e. where a collar is supporting a
vertical load on a post) and of 4.0-8.0 for various dynamic conditions. Values in bold type in the chart indicate
recommended set screw sizes on the basis that screw diameter should be roughly one-half shaft diameter.‘SOCKET SET SCREWS
~ ISO Metric Microsize Plain Cup Point
1 ty
= S
f 744, - Yl tHreap
j #etse Jt | size
Applicable or Similar Specifications:
Bs 4168
DIN 916
ISO 4029
DIMENSIONS AND TIGHTENING TORQUES - ISO Metric Threads
Min. ox
070 25 50
0.80 25 50
0.90 25 50
1.00 25 10.9
120 30 109
‘ALL DIMENSIONS IN MILLIMETRES,
(MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade Alloy Steot 1. Thread Class: 69
Hardness Re 45 Minimum 2.Working Temperature: -50°C-+300°C.
3. For torque and axial holding power see pages 38 & 39.SOCKET SET SCREWS
‘Cone Point -
Deep penetration gives highest axial and torsional
holding power. Unbrako cone point set screws are
ideally suited for use as pivots and for applications
where fine adjustments are necessary.
Use for permanent location of parts.
SY
Knurled Cup Point - Use for quick, permanent
location of gears, collars, and pulleys on shafts.
Exclusive counter-clockwise knurl prevents
Unbrake screws from loosening even in poorly
tapped holes. Resists severe vibration. On all set
screws over ‘/. the cup Is counterbored to provide
maximum ho
SS.
Plain Cup- Use against hardened shafts, in zinc,
die castings and other soft materials where high
tightening torques are impractical
Flat Point - Use where parts must be frequently
re-set, as it causes litle or no damage to the part
it bears against. Can be used against hardened
shafts (usually with ground flat for better contact)
and as adjusting screw. Preferred for thin wall
thickness and on soft plugs,
19 power
Half and Full Dog Point - Use for permanent
location of one part to another, The point is usually
spotted in a hole drilled in a shaft or on a flat
surface milled on the shaft.
Oval Point - Use for frequent adjustment without
Geformation of the part it bears against, also for
seating against an angular surface. Circular U-
grooves or axial V-grooves sometimes put in shatt
to permit rotational or longitudinal adjustment.
aSOCKET HEAD SHOULDER SCREWS
Unbrako shoulder screws are actually hardened
shafts with a knurled head and threaded portion. The
shoulder formed where the threads meet the larger
diameter body acts as a stop when the screw is
threaded into a tapped hole, permitting the screw to be
Used as a pivot, shat, or stationary guide.
Unbrako shoulder screws are used to operate
stripper plates and in pressure pads a wide varisty of
tool and die work. They are also used as shafts or
pivots, holding pulleys, gears, cams and cam
followers, ratchets and circular form tools. Stationary
guide applications including locating pins in fixtures,
latch stops, alignment of stationary members, linkage
blocks, and stock guides in dies. Unbrako shoulder
screws are especially advantageous in applications
where the fastened part must be removed frequently.
For instance, when the shoulder screw is used as a
[APPLICATIONS
Moving Shaft or Pivot
LZL4
ISSSS
ZRLN
shaft for circular form tools, the screw can be removed
to permit sharpening of the tool in a matter of seconds.
‘Assembly is equally as fast.
Unbrako shoulder screws are made of high
grade alloy steel and have knurled heads for sure
‘ripping and quick assembly. The precision hexagon
socket gives maximum wrench engagement to allow
tightening to the full strength of the screw.
Concentricity between body and threads is closely
controlled, permitting easy, accurate assembly. Fully
formed radius root threads ensure maximum tensile
strength and resist stripping.
Finally, the precision tolerance on the shoulder
provides close and accurate mating with the fastened
components. Unbrako manufacture to a tolerance
position closer than required by international
standards,
Ya
KXV
24‘SOCKET HEAD SHOULDER SCREWS
[— Precise control of socket depth gives more wrench engagement than
with other screws, permits full tightening without cracking or reaming
socket, yel provides ample metal in the crucial filet area for
maximum strength,
Knurled head allows sure finger grip, fast assembly.
Neck allows assembly with no chamtering or other
hole preparation.
Shoulder diameter held to close tolerance.
Controlied concentricity between head, body, and
threads for easier, more accurate assembly.
Heat treated alloy steel for maximum strength
without brittleness or decarburisation.
__— Squareness of shoulder is held to close tolerances:
to provided more accurate seating.
—— Fully formed threads are finished close to shoulder.
‘Threads for closest fit possible without selective
assembly, give maximum cross-section for strength,
make parts fit better to utlse full strength of screw.
Controlled root radius doubles
fatigue life of threads by reducing
stress concentrations and avoiding
sharp corners where failures may
start. Contour following flow lines of
rolled threads provide extra strength,
prevent strippingSOCKET HEAD SHOULDER SCREWS - ISO Metric
LeNctH —-+|-— 1]
THREAD
i f
i
ct te =r sae
ISO Grade 12.9
Body Diameter Tol h8
DIMENSIONS - ISO Metric Threads
Mow oy
6.000 5982| 680 562| 450° 384| 185 200
tow| rar| vao| 7ee| oso| aae| tae zoo | nas
rato] ars] an [vise] ooo] 7a0] tas | aso] tos] tas [676] 60
Wee te 108 | ator ou iso) sea toe| eo aet| tes Aon | is | oa 8, oo
sora | wi | gun | zen [stool ral anas| tae) sc | ign] oe0 | ago | tas | ngs sre sn
zea] wis | zon [son Jana] ier] axa ose] 00] tao] aan | aso] tas | aas [27s | 00
22ea| ws | 2s0 | son [zzco| sour] sus | 2.20 | 0co| 1ass| 2es | oo | tas | 20 atv | 120
2cea| wo | 2sn | son [ena] sour] aso | zac | 800 | assu| ees | | tas | aas| 259 | 120
1125 1075/40
(MECHANICAL PROPERTIES
Material Unbrako High Grade Alloy Stee!
Heat Treatment Rc 39-43
Shear Strength 730 Nimm*
NOTES: 2.Straightness
1. [eewcgmmene | dgummaess] THE Maximum deviation ofthe axis ofthe shoulder.
SHOULDER NST
ee ee nw Tw [i io a
s0_|—e1e|oas| ato | eis | ons sional mom
128 [t3e-|-aie {sar | —o1e| 3 Squareness, parallelism, concentrcity and bow of
160 ost | c10 | 034 | 020 | body to thread pitch dia shall be within 0.05 TIR per
180 Osi | 010 | 038 | 00 | centimetre of shoulder length with a maximum 0.70
200 gee o10 | 42 | 920_| when seated against the shoulder in a threaded
oo See} —Bie+—9s5-teas| bushing and checked on the shoulder dia at a
distance of 5.0 from the bearing face of the head.
4.Thread Class: 4g 69
5.da - Transition diameter.
6. Working Temperature: 50°C +300°C
7. Length Tolerance: +0.25mm -0
NB. Because of their configuration, these screws cannot be tensile tested.SOCKET HEAD SHOULDER SCREWS
~ UNC, UNF, BSW and BSF Threads
LENGTH
ry
Applicable Specifications:
BSWIBSF BS 2470
UNC/UNF ANSIB 18.3
Bs 2470
DIMENSIONS - BSW and BSF Threads
nM Ha
2470, 2760 188
497 209s) 244s
562 3720, $190 250
750 | 4970, .5500)
875 6220, 6870) 611375
1.000 7470, 8260) 796 | 500
1.125 | 8720 .9650) .860 | .625
1.312 | 9980) .9970 1.0980] 966.625
1.750 |1:2490 1.2470 1.9660] 1.295 750 | 716
‘ALL DIMENSIONS IN INCHES.
CoN Ao Me |
2460
ses
5730 00
960 “065 | 825
230 ‘on : 750
[ooo | 7480, 7470, 240) 796 500 : 78
‘as 3790" 8720 e005 +080
% 1312 980) 9670 10860) 93 62s +000
tie ta 1750 1.240 12670 1.3680 1.208 | 780 | 716 4.125 | 1.088
{AL DIMENSIONS IN INGHES.
MECHANICAL PROPERTIES NOTES:
Material Unbrako High Grade 1-Length 20.008
Alessi! > CPM Dace Body to ead PD. wihie 0008 TIR when checod sta
HeatTreatment nee {2 block. Body to tread FD. wihin 0.004 TIR when checked at a
Men Baaode Sotanco of 0.185 ram no sod the tveadod ons Squares,
Strength ; ‘concent, paral and bow of Body to thread PD. shall be wii
0.008 TIF perinch of body length wih a maximurn of 0.020 when
Seated against the shoulder ina threaded bush and checked on the
body ata distance of 24 from the underside othe head.
3, Squareness The bearing surface ofthe head shal be perpendicular
to the as ofthe body wn a maximum deviation of 2
A Thnead Cass BSW end BSF Medum
UNGand UNF = 3A
NB. Because of their configuration,
these screws cannot be
tensile tested.
5.da - Transition diameter.
6.Working Temperature: -50°C. +300°C