In this exercise you will create a new multiline style that has multiple elements, colors, fills, and linetypes to simulate a roadway exhibit.
You will then use the newly created style to
create a multiline.
Learning objectives:
• Create multilines and multiline styles.
The new multiline style
1. Open the Mlines.dwg file, as shown in
Figure 1.
Figure 1. Opening the Mlines.dwg file in
AutoCAD.
Create and modify multilines Page | 1
2. Ensure that C-ROAD-LINE is the current layer, as shown in Figure 2.
Figure 2. C-ROAD_LINE as the current layer
3. Open the multiline style dialog. Create
a new multiline style. Call the new style ROADWAY. Give the new style a description of For Roadway Exhibits.
Figure 3. Create a new multiline style called
ROADWAY
Create and modify multilines Page | 2
4. Use color 253 for the fill color. Create two outside segments that are solid lines at a total width of 12 feet and add a dashed line that runs down the middle of the style.
Use the Dashed X2 linetype and color
yellow for the middle element and use Bylayer for color and linetype of both outside elements, as shown in Figure 4.