Professional Documents
Culture Documents
Datasheet Bearing X30312-Y30312-TaperedRollerBearings-TS (TaperedSingle) Metric
Datasheet Bearing X30312-Y30312-TaperedRollerBearings-TS (TaperedSingle) Metric
Part Number X30312 - Y30312, Tapered Roller Bearings - TS (Tapered Single) Metric
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the
cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series 30312
2.00 Kg
Bearing Weight
4.30 lb
Dimensions
7/14/2022 | Page 2 of 4
60 mm
d - Bore
2.3622 in
130 mm
D - Cup Outer Diameter
5.1181 in
31.000 mm
B - Cone Width
1.2205 in
26.000 mm
C - Cup Width
1.0236 in
33.500 mm
T - Bearing Width
1.3189 in
-7.1 mm
a - Effective Center Location3
-0.28 in
7/14/2022 | Page 3 of 4
221000 N
C0 - Static Radial Rating
49800 lbf
Factors
K - Factor7 1.69
on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
26.000
4.8
31.000
130.000
60.000
116.1
121.9
69.0
74.0
-7.1
METRIC UNITS
ISO Factor - e 0.35
ISO Factor - Y 1.74 X30312 - Y30312
Bearing Weight 2 kg Tapered Roller Bearings - TS (Tapered Single)
Number of Rollers Per Row 16 Metric
Effective Center Location -7.1 mm
K Factor 1.69
Dynamic Radial Rating - C90 52200 N
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 30800 N
NORTH CANTON, OHIO USA Static Radial Rating - C0 221000 N
Dynamic Radial Rating - C1 201000 N
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY