Ga
haf Westfalia Separator
Mechanical Separation
Division
Data Sheet
OSD 10 Clarifier and Separator
with self-cleaning bowl
OSD 10-02-067
Function
Clarification and dewatering
of animal fats, olive oil and
other vegetable oils. Recovery
of fats and oils from waste
water. Separation and
clarification of liquids in
chemical and pharmaceutical
plants.
Fields of appli
Food industry, chemical and
pharmaceutical industries,
waste water treatment.Operating principles and constructional features
1 Dirty oil feed
2 Clean oil discharge
3 ‘petal pump, clean oil
4 Disc stack
5 Separating disc
ids holding space
9 Operating water discharge
10 Operating water feedCentrifuge
The OSD 10 is a centrifugal separator that is equipped
with a self-cleaning disc-type bowl which can be
arranged for either clarification of oil ic., iquid-solids
separation, or purification of oil ic.,liquid-liquid-solid
separation.
The product to be purified enters the bow! through the
feed tube (1) and is purified in the disc stack (4). The
separated water flows over the separating disc (5) and
discharges from the bow! by gravity. The purified oil is
discharged under pressure by the built-in centripetal
pump (3). The separated solids accumulate in the
solids space (6) and are periodically ejected from the
bowl during operation.
The bowl is automatically cleaned at preset intervals
during operation of the purifier. The cleaning proce-
dure is managed by a PLC system and can be pro-
grammed to perform any combination of controlled
Partial or full cleaning cycles as determined by the
application.
Frame, hood and drive
The centrifuge is of enclosed design. The hood is
removable. The centrifuge is driven by a three-phase
AC motor. Power is transferred to the bowl spindle via
a centrifugal clutch and a flat belt gear. All bearings are
splash-lubricated from a central oil bath.
Materials of construction
Frame Grey cast iron
Hood Stainless steel
Bowl parts Stainless steel
Centripetal pump Stainless steel
Standard equipment
Three-phase AC motor
Flexible rubber cushions
Anchor bolts
Pressure gauge
1 set of regulating rings to adjust the bowl for
separation or clarification
Additional equipment
(available at extra cost)
* Motor control
* Control unit for automatic operation
* Set of tools
«# Set of standard spare partsTechnical data
Technical data
Bowl
Speed 10000. mint
Volume 31
Solids holding space 151
‘Three-phase AC motor
Power at 50 Hz 55 kW
Power at 60 Hz 66 kW
Speed at 50 Hz 3000 min
Speed at 60 Hz 3600 min‘)
‘Type ANGA-132 $B-02M
Enclosure IPs,
Weights and
shipping case dimensions
Weight
Cenitifuge with motor
and accessories, but without bowl 254 kg
Bowl 72 kg
Case dimensions (length, width, height)
1300 x 850 x 1100. mm
Weight of case net 356. kg
gross 456 ky,
Dimensions in mm Capacity
Rated capacity 6000 1/h
hr as pty mana mp pasty ie The ive
‘Sebel piety one opus gad pases
Ge
oe Westfalia Separator AG
Mechanical Separation
Brision
‘Westfalia Separator AG - Separation Technology - Werner-Habig-StraBe 1 - D-59302 Oelde (FR. Germany)
“el: +49 (0) 2522/77-0- Fax: +49 (0) 2522/77-2488 - Internet: http:/wwwiwestfalia-separator.com