Professional Documents
Culture Documents
Modulo One incorporates a 2 Modulo One can be programmed for A simple profile of flow vs pressure PMAC Lite is compatible with
channel data logger with one flow time or flow profile operating modes. for the distribution system is Microsoft Windows 95, 98 and NT,
channel and one pressure channel. calculated from the headloss curve. making full use of the built in screen,
Pressure measurements are taken When controlling the flowrate is printer and plotter support,
from an integral pressure sensor and Time-Based Profile Modulation measured and dynamically incorporating many features to ease
data is recorded whilst controlling. averaged. The corresponding target operation and maximise efficiency.
Prior to starting control, historical pressure is read form the profile and
flow and pressure data is recorded the PRV outlet pressure is adjusted The PMAC Lite local comms module
Installation on the distribution system and a to this value. offers functions including
typical daily cycle of pressure is downloading data, configuring,
A control chamber is fitted to the established. A pressure profile is The pressure is maintained by the commissioning and starting/stopping
pilot valve of the PRV and two derived and loaded via user-friendly pilot until the next flow measurement logging.
colour-coded tubes connect Modulo software. is taken. As the flowrate changes,
One to the PRV and pilot valve. the PRV outlet pressure is adjusted Data may be viewed graphically or
according to the profile. as values and can be exported to a
spreadsheet. This data may be
summarised and automatic
calculation or max/minsand means
displayed.
Communications
Control
Flow
Inlet pressure
(optional)
Data Logging Parameters: PRV inlet and outlet pressure, range 0-100 m or 0-200 m
+/- 0.5% F.S. accuracy/resolution)
Flow, pulse input, 10 Hz max frequency
Memory: 32 k non-volatile
© Technolog 2002. All rights reserved. Specifications subject to change without prior notice.
For further information contact: Technolog Limited Tel: +44 (0)1629 823611
Ravenstor Road Fax: +44 (0)1629 824283
Wirksworth
Matlock E-mail: technolog@technolog.com
Derbyshire DE4 4FY Internet: www.technolog.com
United Kingdom