Professional Documents
Culture Documents
Ewcad See Cse Aiml - R21
Ewcad See Cse Aiml - R21
CO5 L5 25M
SET- B
1. A line EF of 75mm long is Parallel to both HP and VP. One of its ends, E is 25 mm
CO5 L4 25M
above HP and 10 mm in front of VP. Draw its Projections.
2. A square pyramid of base side 40mm and axis 60mm is resting on its base on the
H. P. Draw its projections when (a) a side is parallel to VP. 25M
CO5 L5
(b) a side of base is inclined at 30° to VP.
(c) all the sides of the base are equally inclined to VP.
3. Draw the Isometric Figure in CAD
CO5 L5 25M
CO5 L5 25M
SET- D
1. A line PQ of 80mm long is inclined at 45° to HP and Parallel to VP. One of its end,
P is 35 mm above HP and 20 mm in front of VP. Draw its Projections. CO5 L5 25M
2. A regular hexagon of 40mm side has a corner in the HP. Draw its projections
25M
when its surface is inclined at CO5 L4
(a) 45° to HP (b) 30° to HP
3. Draw the Isometric Figure in CAD
CO5 L5 25M