You are on page 1of 1
HANDLING SYSTEMS 25932 Eden Landing Rd. Hayward, CA 94545 BATTERY MAINTENANCE PH: (610) 785-6900 + FAX: (510) 785-0908 www.BigJoeLift.com MODEL SERIAL AMPS/HR WEIGHT Las. Disconnect BATTERY ‘rom TRUCK. Connect BATTERY to CHARGER CONNECT ‘CHARGER to TRUCK. ‘wen working on balteries, always be careful and always wear Safety Glasses or Face Shield Battory tops should stay clean and ary. Electrolyte levelin battery check week. Ensure charger is OFF before connection or disconnection of battery to prevent sparks & injury. Proper size charger should be used and charger instructions should be read and followed carefully ‘Aor each duty cycle, Recharge to FULL. ‘Avoid recharging to partial capacities, CAPS NEED TO STAY ON when battery is being Used, charged or when the batery top is being Cleaned. Vent Caps snould only be removed when checking or fling ‘Stool covered batteries should have ‘covers in open position when recharging ELECTROLITE LEVEL NEEDS TO STAY exw FLUNG we AFTER FULL CHARGE ‘of Battery, il with ‘APPROVED WATER {0 1/4 inch below the vent well,

You might also like