Professional Documents
Culture Documents
CCNA - VLANs
You are required to configure the following tasks on given switches:
Fa0/1 Fa0/1
Task 1
Configure names of switches as SW-A and SW-B.
Task 2
Configure domain name of switches as CORVIT.
Verification Command show vtp status
Task 3
Configure SW-A as SERVER and SW-B as CLIENT.
Verification Command show vtp status
Task 4
Configure port FastEthernet0/1 of switches as Trunk Port (Encapsulation DOT1Q)
Verification Command show interfaces trunk
Task 5
Verify SPANNING TREE algorithm.
Verification Command show spanning-tree
Task 6
Configure VLAN 2 and VLAN 3 on switch SW-A.
Verification Command show vlan brief
Task 7
Configure port FastEthernet0/2 and FastEthernet0/3 of SW-A as an Access Port.
Verification Command show running-config
Task 8
Assign membership to ports FastEthernet0/2 and FastEthernet0/3 of SW-A as shown in
the table