Professional Documents
Culture Documents
•
Design procedure for shear reinforcement
•
Design procedure for shear reinforcement
•
• Cl. 26.5.1.5 maximum spacing of shear reinforcement
• Refer pg 47
• Vertical stirrups - max spacing shall not exceed 0.75d
Design procedure for shear reinforcement
•
•
Design procedure for shear reinforcement
7. Choose the diameter of stirrup bar (6,8,10 or 12
mm) spacing of stirrups and the type of stirrup
• Determine the spacing of stirrups
• Check whether the spacing of stirrups satisfies code
requirement
Critical section for shear ( Refer IS 4556 – 2000 pg
52,53)