• Analysis and design of doubly reinforced beams under
flexure and shear by limit state method, Check for deflection, service ability. Problem 1 • Find moment of resistance of a doubly reinforced rectangular beam of width 200mm and effective depth 400mm reinforced with 3 Nos. of 16mm dia on tension side and 2 Nos. of 12mm dia on compression side at an effective cover of 40mm . Use M15 concrete and Fe 415 steel Problem 1 • Problem 1 • Problem 1 • Problem 1 (ASt2 –unknown, so use C2U) • Problem 2 Design of section
Find area of steel required for a
rectangular beam of width 200mm and effective depth 450mm to carry a live load of 10 kN/m over a simply supported span of 8m. Use M15 concrete and Fe 415 steel Problem 2 • Problem 2 • Problem 2 assume d’ = 45mm • Problem 2 • • Problem 2 • Problem 2 • • 3 Nos – 16mm 200mm
450mm
50mm
6Nos – 16mm 6 Nos-16mm
in 2 rows Fig.1 - vertical section) fig.2- Elevation