Professional Documents
Culture Documents
Main shelf
icsFpga.bin, icsSlav.bin, icsSlav1.bin, icsver.z, bootSlav.bin, bootIcs.bin
MP_CONFIG_FILE
agcmd.cfg, ntimer.cfg,license.dat
CNIC
bootcnic.bin, pp5.img
MPRB
pp53.img, bootMPRB.bin
MPRB firewall
pp53fw1.img,pp53fw2.img,pp53fw3.img,pp53fw4.img,pp53fw5.img,pp53fw6.img
GADLC
bootGadl.bin,gilcaVer.z
7. Set ftp server username/password: su3/su3.
8. MG ip address, nexthop and vlan of VoIP, TID and RTP name; in-band ip, vlan, nexthop
Username/password su3/su3
With PC IP 168.10.0.100
Password: zxmg
After download the version finished, power off equipment (each shelf) and restart with
msagreset.
C. Configure the data
Telnet 168.10.0.1 1123
MSAG#config
ETC-BOLE-MSAG-TEST (config-ag) # add-rack rack 1 type 1 //you must select the right rack type
1 - STANDARD
2 - STANDARD_EX
3 - ONU100
5 - OUT50C
6 - OUT50D
7 - 23INCH_EX
ETC-BOLE-MSAG-TEST (config-ag) #add-shelf rack 1 physhf 0 type 6 //shelf type must be checked from
equipment site
5 - MICS_EX
6 - MICS_CTL
8 - ONU100
9 - OUT50C
10 - OUT50D
11 - MBSL_CTL
12 - MBSL_EX
13 - TPU_EX
14 - PP_EX
15 - DOUBLEPP_EX 15
16. - DOUBLEPP_EX
Config MGC:
ETC-BOLE-MSAG-TEST (config-ag)#add-mgc mgcid 1 mgctype 1 mgcip 10.208.0.4 mgcport 2944
ETC-BOLE-MSAG-TEST (config)# vlan add-port 2301 port 0/9/2 tagged // 0/9/0 is uplink port, tagged or
untagged must be confirm.
ETC-BOLE-MSAG-TEST (config)#vlan add-port 2102 port 0/9/0 untagged //0/9/0 is uplink port, tagged
or untagged must be confirm.
ETC-BOLE-MSAG-TEST (config)#save
Restart equipment.msagreset
If h248s is ok, get data to pc, and download standby GIS version, download the data to standby GIS.
Read data£º
Write data£º
Delete data£º
r06_attr E:/DATA/V0100/*.* -R
r06_attr E:/DATA/V0101/*.* -R
r06_del E:/DATA/V0100/*.*
r06_del E:/DATA/V0101/*.*
r06_del D:/persist
r06_del D:/durable