Professional Documents
Culture Documents
Special Features:
8 individually programmable channels Two gates per channel Frequency Range 0.515 MHz by wide band amplifier Large CRT with bright display 4 digit 7 segment LED display to indicate Gain, gate, Range, Memory, etc. Free from distortion & parallax error. Selectable PRF 9 sets of Calibration memory Output for recorder available
TECHNICAL SPECIFICATIONS
Channels Frequency range Test range Linearity Sensitivity Suppression 8 channels multiplexed with all available parameters, can be freely programmed for individual channels. 0.5 to 15 MHz by wide band amplifier. 0-10 mm min., 0-5 M max. 4 step coarse selection and continuous variable fine selection. : Horizontal --- 1% Vertical --- 5% Maximum 140 dB, Variable in 1 dB step from 0 to 100 dB. Normal mode: Linear type. Continuous variable between 0 to 100 % full screen height. Gated mode: Linear type. Suppress unwanted echoes in gated area. Continuous variable between 0-100 % full screen height. Either or both can be activated. 2 gates per channel. Positive / negative logic selectable & display ON / OFF selectable. Gate start, gate width controllable between 1 div. To full screen width & gate threshold variable between 10 to 100 % full screen height. Audio & Visual alarm, Gate search & OFF selection. Audio Alarm mute available. 100 X 80 mm screen with internal graticule. Bright display, free from distortion & parallax error. 10 X 10 main divisions each with small sub divisions. 4 digit 7 segment LED display to indicate 1. Threshold, Rejection in % of full screen, 0-99 in9 step (10, 20, , 90). 2. Gain in dB, in 1 dB step. 3. Memory set no. 1 to 9. 4. Coarse range 1/5/25/100 cm. Range dependant, min. 200 mm & max. 3 M. Functional sealed touch control for all parameters. Visual indication of selected parameter. Slew Key UP / DOWN for function value change. 9 sets. All parameters can be stored in memory. Range dependant 10mm 1 KHz/Channel 50mm 500Hz/Channel 250mm 250Hz/Channel 1mtr 125Hz/Channel Setting for all parameters can be locked. 4 digit programmable password. Pulse Reflection or Pulse Transmission Factory set for T+R or T/R mode for individual channel. External 12 V DC, 2A, required. By flash LED indicator. Output suitable to record A-Scan pattern and instrument parameters. Sweep Less than 0.7 mm / 10 C. Up to 55 C 5 Kg. 400 mm (L) X 280 mm (W) X 120 mm (H)
Monitor
Lock Test method Operating modes Power supply Power check Output Drift Temperature range Weight Size