Professional Documents
Culture Documents
DCP DriversCleanup
DCP DriversCleanup
exe >
then right click > run as admin) and enter the following command:
Step 2. Using a text editor (notepad, notepad++, etc) open up the txt file. Press the CNTRL+F keys and
find “GE Intelligent Platforms”. Check for duplicate entries of “GE Intelligent Platforms”, here is an
example where two drivers exist (take note of the published name in green):
Step 3. Back in the command prompt, type the following:
Where Published Name is what you see in green example above. Example command line session:
Repeat the same command for all instances of drivers found per step 2.
Step 5. Finally, relaunch PME and retest the DCP tool for correct operation.