Professional Documents
Culture Documents
SELECTION GUIDE 1
INPUT CHARACTERISTICS 1
FEATURES Parameter Conditions MIN TYP MAX Units
■ Industry Standard Footprint 24V input types 18 24 36
Voltage Range VDC
48V input types 36 48 75
■ 1kVDC Isolation
Reflected Ripple 24V input types with 10µF at input 200 250 mA p-p
■ Dual Isolated Output Current 48V input types with 10µF at input 125 150
■ Short Circuit Protection
OUTPUT CHARACTERISTICS 1
■ Low Profile 24 Pin Case
Parameter Conditions MIN TYP MAX Units
■ Efficiency to 81%
Rated Power 3 W
■ Power Density 0.90W/cm 3 Voltage Set With external input/output capacitors,
Point Accuracy refer to recommended test circuit ±1 ±5 %
■ 2:1 Wide Input Range
Low line to high line,
■ 24V & 48V Input Line Regulation with external input/output capacitors, 0.15 0.5 %
refer to recommended test circuit
■ 12V & 15V Output
25% load to 100% load,
■ Footprint 4.73cm2 Load Regulation with external input/output capacitors, 0.2 0.5 %
refer to recommended test circuit
■ UL 94V-0 Package Materials
BW = 20Hz to 300kHz
■ Operating Temperature Range Ripple With external input/output capacitors, 15 30 mV rms
–40°C to 85°C refer to recommended test circuit
BW = DC to 20MHz
■ Load and Line Regulation Ripple & Noise With external input/output capacitors, 90 150 mV p-p
<1% on Both Outputs refer to recommended test circuit
Cross % voltage change on negative output
■ No Heatsink Required when positive load varies from 12% to 2.1 3.0 %
Regulation
■ Internal SMD Construction 50% with negative load fixed at 50%
0.268±0.022
6.80±0.55
0.577(14.66) 0.031±0.006
(0.80±0.15)
Tube Length: 20.472±0.079(520mm±2mm)
Tube Material: Antistatic coated clear pvc.
0.275(7.00)
C&D Technologies (NCL) Limited reserve the right to alter or improve the C&D Technologies (NCL) Ltd C&D Technologies Inc.
specification, internal design or manufacturing process at any time, without Tanners Drive, Blakelands North 3400 E Britannia Drive, Tucson,
notice. Please check with your supplier or visit our web site to ensure that Milton Keynes MK14 5BU, England Arizona 85706, USA
you have the current and complete specification for your product before use. Tel: +44 (0)1908 615232 Tel: +1 (800) 547-2537
© C&D Technologies (NCL) Limited 2002 NDC NDT.1 Fax:+44 (0)1908 617545 Fax: +1 (520) 741-4598
email: info@cdtechno-ncl.com email: sales@cdtechno.com
No part of this publication may be copied, transmitted or stored in a
retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior www: http://www.dc-dc.com
written permission from C&D Technologies (NCL) Limited.
Instructions for use are available from www.dc-dc.com
This datasheet has been download from:
www.datasheetcatalog.com