eee |
Soe
Date of Issue: October 31,2001
‘Affected Publication: API Standard 1104, Welding of Pipelines and Related Facilities,
Nineteenth Edition, September 1999
ERRATA,
Page 2, Section 3.27, Part of line 3
Replace: somewhat above the inside surface
With: somewhat below the inside surface
Page 3, Section 5.3.23, Part of Line 1
Replace: of diameters and wal thicknesses
With: of outside diameters and wall thicknesses
Page 4, Figure 1, Part of Line 4
‘Replace: Diameter and wall thickness
With: Pipe outside diameter and wall thickness
Page 8, Section 5.6.1, Part of Line 6
Replace: Figures 4,5, 6,0r7
With: Figure 4 5,6, or 7
Page 9, Figure 3, Part of Note 2
Replace: with a diameter less than or equal to 1.315 in. 3.4mm)
‘With: with an outside diameter less than or equal to 1.315 in, (334mm)
Page 14, Figure 10, Part ofthe note, Line 2
‘Replace: with a diameter less
‘With: with an outside diameter less
Page 15, Section 5.8.1, Part of Line 7
‘Replace: in diameter
With: in outside diameter
Page 16, Section 6.3.2, Part of Line 2
Replace: with a diameter
With: with an outside diameter
Page 16, Section 6.3.2, Part of Line 4
Replace: with a diameter
With: with an outside diameterPage 16, Section 6.3.2, Part of Line 9
Replace: with a diameter
With: with an outside diameter
Page 16, Section 6.3.2, Part of Line 11
Replace: all pipe diameters
With: all pipe outside diameters
Page 16, Section 6.3.2, Part of Line I2
Replace: the diameter used
‘With: the outside diameter used
Page 17, Figure 12,
‘Replace the bottom portion of the igure and the notes with the following:
seston
peta a
Nidreak Ne Nikereok
= ame
Greate than 12.750" (328.9 men)
4 ron
Face or side bend
Nick break Wa Nick break
Root or side bend
Tense
Notes:
1. Atte company’s option, the locations may be rotate, provide they are equally spaced around
the pipe: however, specimens shall not include the longitudinal weld
2, One full-section tensile-strength specimen may be used for pipe with an outside diameter less
than or equa to 1.315 in. (334mm).
Figure 12—Location of Test Butt-Weld Specimens for Welder Qualification Test
Page 18, Section 65.1, Part of Line 9
Replace: with a diameter less
‘With: with an outside diameter less
Page 18, Section 65.1, Part of Lines 10 and 1]
‘Replace: may substituted
‘With: may be substitutedPage 18, Section 6.5.1, Part of Line 13
Replace: 5.533.
With: 653.
Page 24, Section 9.3.11, Part of Line 2
‘Replace: material tothe toe
‘With: material adjacent to the toe
Page 24, Section 93.11, Part of Line 6
Replace: The aggregate
With: a. The aggregate
Page 24, Section 93.11, Part of Line 9
‘Replace: The aggregate
‘With: b, The aggregate
Page 27, Section 9.4.2, Part of Line 11
Replace: 93.8.2 and 93.8.3
With: 93.9.2 and 93.9.3
Page 27, Section 9.4.3, Part of Line 3
Replace: by shall be
‘With: shall be
Page 27, Section 9.5.2, Part of Line 11
Replace: 9.38.2 and 93.8.3
With: 939.2 and 939.3
Page 29, Section 10.5.1, Part of Line!
Replace: qualified worker
‘With: qualified welder
Page 30, Section 1113.1, Part of Line 11
Replace: When the diameter
‘With: When the outside diameter
Page 32, Table 7
‘Replace: Pipe Wall or Weld Thickness
With: Weld Thickness
Page 36, Section 114.5, Part of Line 2 of Last Paragraph
Replace: diameter
With: outside diameterPage 38, Section 12.4.2.3, Part of Line 1
Replace: range of diameters
With: range of outside diameters
Page 39, Section 12.5.2.5, Part of Line I
Replace: pipe diameter
With: pipe outside diameter
Page 46, Section 13.4 (c)
Replace: and diameter
With: and outside diameter
Page 46, Section 13.4 (@)
Replace: and diameter
With: and outside diameter
Page 46, Section 13.52 (b)
Replace: or diameter
With: or outside diameter
Page 51 Appendix A, Section A3.1 (p)
Replace: pipe diameter
With: pipe outside diameter
Page 55, Appendix A, Section A7.1, Part of Lines I and 2
Replace: 36:in-diameter0.812-in-wall,
‘With: 36in, outside diameter, 0.812-in. wall thickness,
Page 55, Appendix A, Section A.7.2.1 (a)
Replace: pipe diameter
With: pipe outside diameter
Page 65, Appendix B, Figure B-3, Part of Note
Page 65, Appendix B, Table B-1, Part of Footnote a
Replace: branch diameter
‘With: branch outside diameter