Professional Documents
Culture Documents
Tutorial Sheet-2
Q1. Determine the current I for the configurations of Fig. 1 and 2.
Fig. 1 Fig. 2
Q2. In question 1 (Fig. 1), if DC battery source is replaced by an AC signal shown below,
calculate the maximum voltage across 10 Ω resistance.
Q3. Using the approximate characteristics for the Si diode, determine VD, ID, and VR for the
circuit of Fig. 3
Fig. 3
Q4. Sketch the output voltage vo for the circuit shown in Fig. 4, also determine the DC output
voltage (Vdc).
Fig. 4
Q5. Obtain the DC load line equation for the circuit shown in Fig. 5. Find the saturation and
cut-off points.
Fig. 5