Professional Documents
Culture Documents
1. Assemble spray atomizing nozzle and nozzle holder and secure the nozzle with lock washer as
previously.
2. Put a new gasket on nozzle holder and insert into nozzle stud. Make sure that the old gasket is
completely removed.
3. Replace ± if necessary ± packing rings, mount them together with spacer ring and fit flange with
screws, nuts and washers.
Gasket
Flange
Spray nozzle
Packing rings
Lock washer
Nozzle holder
This document contains proprietary information with all rights and titles reserved and may not be reproduced, disclosed or used in whole or part without
written authorization from Control Components, Inc.