Professional Documents
Culture Documents
Active Products
5RU Active RF Chassis
Power Supply: (front view)
Page 1 of 2
Specifications subject to change without notice. MAXNET specifications are only valid when ATX plug-in pads & EQs are used.
Patented
® U.S.# 6,842,348;
Cdn.# 2,404,844
Ordering Information
Part Number Description
MNRPS 24V, 3.6A Remote Powering Unit
MNRPSCM 24V, 3.6A Remote Powering Unit with Current Monitoring
MNAC-110 110VAC to 24V, 3.6A Diode or'd Redundant Power Supply
MNAC-110CM 110VAC to 24V, 3.6A Power Supply with Current Monitor
MNAC-220 220VAC to 24V, 3.6A Diode or'd Available (Consult PCI Factory)
MNAC-220CM 220VAC to 24V DC, 3.6A Power Supply with Current Monitor
MNDC -48VDC to 24V, 3.6A True Load Sharing Redundant Power Supply
MNDCCM -48VDC to 24V, 3.6A Power Supply with Current Monitor
Power Supply
INPUT VOLTAGE: 110 ± 10 VOLTS AC INPUT VOLTAGE: 220 ± 20 VOLTS AC INPUT VOLTAGE: -48 ± 12 VOLTS DC
FREQ: 50/60Hz FREQ: 50/60Hz CURRENT: 3.0 AMPS DC
CURRENT: 2.0 AMPS AC CURRENT: 1.0 AMPS AC OUTPUT VOLTAGE: 24 ± 1.0 VOLTS DC
OUTPUT VOLTAGE: 24 ± 1.0 VOLTS DC OUTPUT VOLTAGE: 24 ± 1.0 VOLTS DC CURRENT: 3.6 AMPS DC
I.T.E. POWER SUPPLY I.T.E. POWER SUPPLY I.T.E. POWER SUPPLY
E226099 CURRENT: 3.6 AMPS DC E226099 CURRENT: 3.6 AMPS DC E226099
5UA5 5UA5 5UA5
+24V
BUS
+24V
BUS PWR
VOLTAGE
F NO RLY MONITOR + TEST
24V (V ALARM)
IN LOGIC - (~ 24V)
6.3A
250V +24V
24V IN A F
OUT
PWR +24V 6.3A
MONITOR IN B 250V
RLY + TEST
(ALARM) LOGIC CURRENT I SET
- (~ 24V) NO RLY MONITOR
(I ALARM) LOGIC
SET
ADJ
MNRPSCM ONLY
INPUT VOLTAGE: 24 ± 1.0 VOLTS DC OUTPUT VOLTAGE: 24 ± 1.0 VOLTS DC
CURRENT: 3.6 AMPS DC CURRENT: 3.6 AMPS DC
INPUT VOLTAGE: 24 ± 1.0 VOLTS DC OUTPUT VOLTAGE: 24 ± 1.0 VOLTS DC
CURRENT: 3.6 AMPS DC CURRENT: 3.6 AMPS DC
MNRPS
MNRPS(CM)