WM Reg. No.
LI oe ele)
Question Paper Code : 47316
AMINATION, JANUARY 2018
First Semester
Power Electronics and Drives
PX 5151 ~ ANALYSIS OF ELECTRICAL MACHIN
(Common to M.E. Power Systems Engineering)
(Regulations 2017)
M.Tech. DEGRE
‘Time : Three Hours , Maximum : 100 Marks
wvrw.recentquestion paper.com
Answer ALL questions
PART - A (10x2=20 Marks)
1. Determine the voltage equations for winding inductances.
2. Compare single and double excited system
3. List the general torque equation of DC machine.
4. What is the significance of state equation ?
5. What is the function of static reference frame ?
6. Specify the variables observed from several frames of reference.
7. Brief the function of free acceleration characteristics,
8, What do you mean by steady state operation of induction machine ?
9. Give Park's equations.
10. State the need for computer simulation, wvow.tecentquestion paperscom
PART -B (5*13=65 Marks)
11. a) Derive the air gap mmf and per phase machine inductance using physical
machine data. (3)
OR)
b) Derive the general expression of stored magnetic energy, co-energy and force
for doubly excited aystem. a3)ANA
47316
12. a) Determine the voltage equation of DC machine and explain the dynamic 7
characteristics of DC permanent magnet DC motor. «aay
(OR)
b) Mlustrate in detail the solution methodology of obtaining the dynamic
characteristics by Laplace transformation. a3)
13, a) Explain the different reference frame transformations. (13)
(oR)
b) Explain the transformation of balanced 36 winding into equivalent 2-phase
winding as)
14. a) Describe in detail about the computer simulation of induction machines in
arbitrary reference frames. 3)
(OR)
b) Rotor resistance and standstill reactance per phase of an induction motor are
0.04 2 and 0.02 Q respectively. What should be external resistance required
at start in rotor circuit to obtain
a) Maximum torque at start www. recentquestion paper.com
b) 50% of maximum torque at start. (3)
15. a) Apply Park's transformation on a three phase synchronous machine and obtain
its voltage and torque equations. (13)
(or)
b) Derive significance of voltage and torque equations of synchronous machine. (13)
PART-C (1x15=15 Marks)
16. a) A three phase 100 kW, 415 V, 50 Hz, 2 pole slip ring induction motor has a
resistance of 0.06 2 measured between each pair of its slip rings, Stator and
rotor are both star connected. The turn's ratio from stator to rotor is 1.2, This
motor drives a fan which require 100 kW at full load slip of 0.03. The torque
demand of fan varies with square of the speed, Conclude what resistance be
inserted in series with each slip ring so that the fan will run at 210 rpm? (15)
(OR)
b) A three phase star connected 60 Hz synchronous generator has direct axis
synchronous reactance of 0.65 p.ut. and quadrature axis synchrenous reactance
0f0.5 p.u. The generator delivers rated KVA at rated voltage. Draw the phasor
diagram at full load, 0.8 Ingging power factor and hence evaluate the open circuit
voltage and voltage regulation, coe (5)
er “
et