Create a structure how to do the planning change to the strucrure Release MECO and MCO
1. Top level part - end item, panning required and product
create strucure 2. Go for the Manufacturing Details->Manufacturing Responsibility-->Edit all then Actions-->Create Manufacturing Plan 3.Click on Bill of Materials--Select all -> Create Change order 4.Promote all the parts to Approved state by mass promote 5.promote connected CA to In Approval state and click on promote to Complete state --alert will be displayed 6.Go to top level part and click on Manufacturing Details->Manufacturing Responsibility -> Editall --actions--Create new manufacturing Responsibility automatically MECO will be created Click on MBOM Planning--Click on filter icon--change to "current and planning" and click on edit all Select first level parts(B-) and click on move to left and expnad the structure on the consumption view side and all are in red(not consumed). Select Top level part on the "planning view " side and actions-add new-- Synthetic part will be created create one more synthetic part select c- level parts on the consumption view and click on move to right and then click on paste repeat for second synthetic part
Go to top level part and click on Manufacturing Details->Manufacturing
Responsibility --open MECO and Release MECO and MCO will be created automatically and able to see under Related MCOs tab and Release the MCO When MCO will be implemented then we can see the full structure in MBOM plant specific view.