2022, 01:04 Ebus protocol voor cv installaties - Forum - Circuits Online
Technical interface = transceiver: The technical interface between a
module and the bus is based on a standard UART RS 232 interface in conjunction with some additional components providing the following characteristics: − 2 wires twisted pair cable for transport signals and electric power. No shielding. − Signal coding: Logical „1“ = 15 to 24 V-DC; Logical „0“ = 9 to 12 V-DC − Logical „1“ = recessive bus value; logical „0“ = dominant bus value − Power supplied by the bus lines is limited to 18 mA/node − Reverse polarity protection − Bus Coupling: Galvanically coupled or decoupled (e.g. by opto-couplers) − Bit rate: 2.400 Baud