Professional Documents
Culture Documents
DYNAMIC+
DYNAMIC+P
AUTEC GLOBAL PRESENCE
AUTEC is a leading manufacturer of wireless control devices with safety functions used to remotely
control self-propelled or fixed position operating machines in the construction, steel industries and
maintenance and logistics in general. The development and production headquarters are in Vicenza,
Italy, 100 km from the Venice airport hub. Other group companies are based in Germany, Spain, South
Korea, China, USA, Canada and Brazil and provide technical, logistics and commercial support. AUTEC
integrates the management of business processes, especially design and production, based on reliabil-
ity, sturdiness and safety.
7
GROUP COMPANIES AND OVER 30 DISTRIBUTORS AND
SERVICE CENTRES WORLDWIDE
RADIO REMOTE DYNAMIC
870 MHz
(128 channels)
DYNAMIC+
870 MHz
(128 channels)
DYNAMIC+P
870 MHz
(128 channels)
CONTROLS
915 MHz 915 MHz 915 MHz
(256 channels) (256 channels) (256 channels)
447 MHz
Frequency (32 channels)
band 434 MHz
(63 channels)
FOR HYDRAULIC AND MOBILE MACHINERY 429 MHz
(40 channels)
2.4 GHz 2.4 GHz
For direct current applications normally associated with hydraulic machinery used on work sites, in (up to 83 channels) (up to 83 channels)
logistics and transportation, infrastructure maintenance and many other sectors, AUTEC offers DYNAMIC,
DYNAMIC+ and DYNAMIC+P series radio controls with different features to meet specific requirements. CANopen 2.0 A CANopen 2.0 A CANopen 2.0 A
CANopen 2.0 B CANopen 2.0 B
Fieldbus J1939 J1939
GENERAL FEATURES
customizable customizable
• Human-machine interface available on a wide range of graphic displays or LEDs
• The colour displays are CODESYS V3.5 programmable via Ethernet in accordance with IEC 61131-3 MULTIPLE SYSTEMS DUAL BAND PAIRING
• Customizable CANopen 2.0A, CANopen 2.0B and J1939 communication protocols (with 2.4 GHz band) SINGLE MODULE VIA CABLE
• Programmable functions for several digital and proportional applications
Special Multiple systems such as Dual frequency band The transmitting unit and
features Take & Release, multi-re- available in one radio the receiving unit are
Hamming distance: ≥ 15 ceiving and multi-unit sys- module. PAIRED via a cable.
Typical working range: 100 m (330 ft) tems can be integrated.
Protection degree: IP65 (NEMA 4)
Working temperature range of transmitting units: (-25°C) ÷ (+55°C) / (-13°F) ÷ (+130°F)
Working temperature range of receiving units: (-25°C) ÷ (+70°C) / (-13°F) ÷ (+158°F)
Storage temperature of transmitting and receiving units: (-40°C) ÷ (+85°C) / (-40°F) ÷ (+185°F) CRX CRD CRP
Receiving ARX
units ARM
SAFETY available ADD
The DYNAMIC, DYNAMIC+, DYNAMIC+P series have been designed to meet the latest functional safety
standards including EN ISO 13849-1 and IEC 62061. The transmitting and receiving units communicate with
each other using a unique, univocal, non-reproducible code via a “proprietary AUTEC system”. PAIRING
In the DYNAMIC+P series, the transmitting unit and the receiving unit are paired using a simple PAIRING
• STOP function up to PL e, cat. 4 / SIL 3 in accordance with EN ISO 13849-1/EN IEC 62061 procedure in which the two units are connected by cable control. The system leaves AUTEC already paired
• Protection from unintended movement of the actuators from standstill (UMFS) up to PL d, cat.3 / and identified. The units do not have a code key. The biggest advantage is when one of the two units has to
SIL 2 in accordance with EN ISO 13849-1 / EN IEC 62061 be replaced with a back-up unit: when this occurs, PAIRING makes the procedure much simpler.
The STOP and UMFS functions have been certified by TÜV SÜD on numerous models in the DYNAMIC
series. A certificate issued by a competent, recognized and independent third party is a further guarantee
of the product's safety, quality and reliability.
COMPACT
COMPACT is a transmitting unit used for the remote control of machinery in different
MAIN FEATURES STANDARD ACCESSORIES
sectors.
• FHSS bi-directional radio with automatic free • Shoulder harness or waist belt
With a reliable radio link and compliance with functional safety requirements, this channel search (870/915 MHz or 2.4 GHz, • Removable NiMH or Li-Ion battery and battery
“compact” transmitter which can be carried on a waist belt or shoulder strap is suitable depending on model) charger
for use in difficult working environments. Designed with an ergonomic shape to prevent • STOP function up to PL e, SIL 3 (in accordance
with EN ISO 13849-1/EN IEC 62061)
involuntary activation and issues caused by external interference when in use, its working
area is optimized so that the actuators on the top and sides can be easily accessed/held. • UMFS up to PL d, cat.3 / SIL 2 (in accordance OPTIONS
The upper frame has comfortable rubber handles and a 2.8“ TFT colour display. with EN ISO 13849-1/EN IEC 62061)
• Can also be used in multiple systems (2.4 GHz only) • 2.8" TFT LCD display (240x320 pixels, 65536
Mechanical and chemical resistance is guaranteed in all configurations as well as an IP65 • Removable power keyswitch Key ID 0-1 colours)
protection degree and drop resistance of 1.5 m. • Typical work area: 100 metres (330 ft) • 32 signalling LEDs
• Customizable labeling • LEDs on panel
• Display of machine status with 4 or 32 LEDs • Cable control
• Autonomy with fully charged battery at 20°C • External buzzer
(68°F): • IR sensor
18.5 h with Li-Ion battery without display • Aluminium panel (for harsh work environments)
9 h with Li-Ion battery and 2.8’’ display • Marine environment protection
11 h with NiMH battery • Removable mechanical power keyswitch (if
Key ID 0-1 is not present)
• M-Key removable magnetic power keyswitch
(only for PJC)
243 mm (9.60 in)
LINK
LINK is a transmitting unit specifically designed for the wireless control of hydraulic
MAIN FEATURES STANDARD ACCESSORIES
cranes with 4 to 6 linear joysticks.
• FHSS bi-directional radio with automatic free • Shoulder harness or waist belt
The main features of this product are ergonomics and reliability which offer the user channel search (870/915 MHz or 2.4 GHz, • Removable NiMH or Li-Ion battery and battery
significant benefits. The data feedback option displays information on controls and depending on model) charger
machine status in real time on a 2.8’’ TFT LCD colour display. • STOP function up to PL e, SIL 3 (in accordance
with EN ISO 13849-1/EN IEC 62061)
The side buttons are flat and have a large touch surface which makes them well protected • UMFS up to PL d, cat.3 / SIL 2 (in accordance OPTIONS
and easy to use. Customers can personalize the product with their own logo. with EN ISO 13849-1/EN IEC 62061)
• Removable power keyswitch Key ID 0-1 • 2.8" TFT LCD display (240x320 pixels, 65536
LINK is available with FSA technology with bi-directional FHSS radio on a 870/915 • Typical work area: 100 metres (330 ft) colours)
MHz or 2.4 GHz frequency band. LINK can also be used with DYNAMIC+P and can be • Customizable labeling • 32 signalling LEDs
paired with the new CAN (CRP) receiver by cable. • Autonomy with fully charged battery at 20°C • LEDs on panel
(68°F): • Cable control
18.5 h with Li-Ion battery without display • External buzzer
9 h with Li-Ion battery and 2.8’’ display • IR sensor
11 h with NiMH battery • Marine environment protection
• Removable mechanical power keyswitch (if
Key ID 0-1 is not present)
• M-Key removable magnetic power keyswitch
(only for PJN)
309 mm (12.20 in)
309 mm (12.20 in)
CURVE
CURVE is a joystick transmitting unit that can house 8 linear joysticks and up to 3 multi-
MAIN FEATURES STANDARD ACCESSORIES
axis joysticks.
• FHSS bi-directional radio with automatic free • Shoulder harness or waist belt
It is ideal for controlling medium/large sized hydraulic cranes but can also be used channel search (870/915 MHz or 2.4 GHz, • Removable NiMH or Li-Ion battery and battery
on concrete pumps and for many other applications. A data feedback function gives depending on model) charger
the user important information on machine status on a customizable 2.8’’ TFT LCD • STOP function up to PL e, SIL 3 (in accordance
with EN ISO 13849-1/EN IEC 62061)
colour graphic display or via 32 LEDs or also on a 4.3’’ colour display (CODESYS/Linux
programmable). • UMFS up to PL d, cat.3 / SIL 2 (in accordance OPTIONS
with EN ISO 13849-1/EN IEC 62061)
CURVE is available with FSA technology with bi-directional FHSS radio on a 870/915 • Removable power keyswitch Key ID 0-1 • 2.8" TFT LCD display (240x320 pixels, 65536
MHz or 2.4 GHz frequency band. It can also be used with DYNAMIC+P receiving units • Typical work area: 100 metres (330 ft) colours)
and can be paired with the new CAN (CRP) receiver by cable. • Customizable labeling • 4.3" TFT LCD display (480x272 pixels, 65536
• Autonomy with fully charged battery at 20°C colours)
(68°F): • 32 signalling LEDs
18.5 h with Li-Ion battery without display • LEDs on panel
9 h with Li-Ion battery and 2.8’’ display • Cable control
11 h with NiMH battery • External buzzer
• IR sensor
• Tilt or impact sensor (only with HIC controls
expansion board or 4.3’’ display)
• Marine environment protection
• Removable mechanical power keyswitch (if
Key ID 0-1 is not present)
• M-Key removable magnetic power keyswitch
(only for PJQ)
264 mm (10.40 in)
263 mm (10.35 in)
FJR/DJR/PJR
FJM/DJM/PJM
FJB/DJB/PJB
The highly configurable FJB / DJB / PJB transmitting units are suitable for heavy duty
MAIN FEATURES STANDARD ACCESSORIES
environments. They have a large number of controls and are sturdy, a characteristic
of all AUTEC products. • FHSS bi-directional radio with automatic free • Back strap
channel search (870/915 MHz or 2.4 GHz, • Removable Li-Ion battery and battery charger
These joystick transmitting units, which are user friendly thanks to a portable system depending on model)
• STOP function up to PL e, SIL 3 (in accordance
specially designed to assist the operator, have up to 12 proportional controls and up to
64 digital controls with a data feedback option that shows the information received from with EN ISO 13849-1/EN IEC 62061) OPTIONS
the machine on a colour graphic display or panel LED. • UMFS up to PL d, cat.3 / SIL 2 (in accordance
with EN ISO 13849-1/EN IEC 62061) • 4.3" TFT LCD display (480x272 pixels, 65536
• Can also be used in multiple systems (2.4 GHz only) colours)
• Removable power keyswitch: Key ID 0-1 or • 7" TFT LCD display (800x480 pixels, 65536
mechanical colours)
• Typical work area: 100 m (330 ft) • LEDs on panel
• Customizable labeling • Cable control
• Up to 10 linear joysticks • External buzzer
• Up to 4 dual or 3-axis joysticks • IR sensor
• Up to 26 actuators on the top, up to 10 • Tilt or impact sensor (only with HIC control
buttons on the top side and up to 4 buttons expansion board or 4.3’’ or 7" display)
on the bottom side on both sides • Marine environment protection
• Autonomy with fully charged battery at 20°C • 3-axis joystick
(68°F): • ID internal tx memory (if Key ID 0-1 is not
8 h (Li-Ion) with 4.3’’ display present)
8 h (Li-Ion) with 7’’ display • M-Key removable magnetic power keyswitch
(only for PJB)
N.B.: the 7’’ display option has a dual Li-Ion bat-
tery, with a smart card.
DISPLAYS
OTHER DISPLAYS
The FJR/DJR/PJR, FJM/DJM/PJM transmitting units have a 2.7’’ transflective LCD display which shows
strings, machine data and icons of various shapes and sizes. A 2.8’’ colour display is available for the FJC/
DJC/PJC, FJN/DJN/PJN, FJQ/DJQ/PJQ transmitting units.
Due to bi-directional communication, all the transmitting units in the DYNAMIC, DYNAMIC+, DYNAMIC+P
series can show messages received from the machine on graphic displays and/or high efficiency LEDs.
LED MATRIX
32 LED matrix
MAIN FEATURES MECHANICS
• Easy to read even in very sunny conditions The display is installed at the top of the • 32 LED version
• Viewing angle of display up to 130° transmitting unit. The anti-glare scratch-proof • Available for all models
• CODESYS V3.5 programmable via Ethernet in plexiglass screen is encased in a plastic structure • Customizable brightness for models
accordance with IEC 61131-3 with an IP65 protection degree. FJC/DJC/PJC, FJN/DJN/PJN, FJQ/DJQ/
• 6 keys on the top for navigation on display PJQ
and/or special functions 4.3’’ GRAPHIC DISPLAY
• 8 inputs
• 6 outputs in Source Mode • 480x272 pixel resolution, 16:9
• 11 outputs in Sink Mode • Brightness 500 cd/m²
• Operating temperature: -25°C to +55°C • Up to 65536 colours
• Storage temperature: -40°C to +85°C • 16 LEDs indicating correct functioning of ma-
• 3-axis accelerometer chine and any warnings
• Customizable screens
7’’ GRAPHIC DISPLAY
ELECTRONICS • 800x480 pixel resolution, 16:9
The internal electronics include a 2 GB Data • Brightness 800 cd/m²
Memory. • Up to 65536 colours
RECEIVING UNITS
ARM
CRX
Receiving unit with 12 analogue outputs and 64 digital outputs via Receiving unit configurable with up to 12 analogue outputs (voltage) and
148 mm (5.83 in)
CANopen interface, 4 MOSFET digital outputs. Connecting interfaces with 24 analogue PWM outputs (12 bi-directional axes), up to 64 digital outputs,
• MOSFET board with 16 digital outputs • Board with 4 analogue PWM outputs (2 bi-
Power supply: 8-30 VDC Rated current of proportional
• Compatible with ARM and ADD directional axes)
Rated current of STOP / Safety outputs (voltage): 10 mA (28 VDC)
FSADRO08A/B • 4 MOSFET digital outputs
contacts: Max. dimensions:
• Relay board with 8 digital outputs • Compatible with ARX
SO_1=2 A (30 VDC), SO_2=2 A (30 VDC) 240x186x83 mm (9.45x7.32x3.27 in)
• Compatible with ARM and ADD FSAAMI06A
Rated current of digital outputs: Weight: 1.2 kg (2.7 lb)
FSADIA16A • Board with 6 analogue inputs (current or
2 A (30 VDC)
• Board with 16 diodes voltage) and CAN output
Rated current of proportional
240 mm (9.45 in) • Compatible with ARX • Compatible with ARX
outputs (PWM):
2 A (30 VDC)
DYNAMIC SERIES MULTIPLE SYSTEMS BATTERIES AND BATTERY CHARGERS
The DYNAMIC series 2.4 GHz can be used to configure radio remote control systems consisting of several
transmitting or receiving units: with these multiple systems one machine can be controlled by several
operators or several machines (or parts of a machine) can be controlled by just one operator.
MULTI-UNIT SYSTEMS
CABLE CONTROL
The cable control, available as an option, connects the transmitting unit and the receiving unit via a cable
replacing the radio link and is used:
AUTEC Srl
Via Pomaroli, 65 - 36030 Caldogno (VI) - Italy
Tel. +39 0444 901000 - Fax +39 0444 901011
info@autecsafety.com - www.autecsafety.com
Made in Italy
Cert. UNI EN ISO 9001:2015 No. 50 100 2877 Design,
manufacture and service of remote control systems for safety
industrial application.
This documentation includes general descriptions and / or technical characteristics of the relevant Autec products. This documentation
does not replace nor is sufficient for the assessment of the relevant products regarding their suitability to the user’s specific application.
The user or the system integrator has the obligation to carry out a correct and complete risk analysis, to evaluate and test the products
in the specific application or use. Neither Autec nor any of its affiliates or subsidiaries shall be liable for the misuse of the information
contained herein.