Professional Documents
Culture Documents
325608 中国 浙江省乐清市虹桥镇溪西工业区C区3座 温州龙华日用电子有限公司 Xiaobo Hu
325608 中国 浙江省乐清市虹桥镇溪西工业区C区3座 温州龙华日用电子有限公司 Xiaobo Hu
中国
浙江省乐清市虹桥镇溪西工业区C区3座
温州龙华日用电子有限公司
XIAOBO HU
XIAOBO HU
WENZHOU LONGHUA DAILY ELECTRON CO LTD
3 BLDG, PART C
XIXI INDUSTRY ZONE Date: 2016/06/14
HONGQIAO Subscriber: 118317001
YUEQING PartySite: 536596
ZHEJIANG 325608 CHINA File No: E258930
Project No: 4787460459
PD No: 16M28053
Type: R
PO Number:
Inspections at your plant will be conducted under the supervision of Mr. QIU KAIFAN, UL INSPECTION
CENTER DONGGUAN, CHINA NAT' IMPORT & EXP COM INSP CORP, 6 LI CHENG RD, ZHONGCHANG BLDG, 5TH FL,
CHANG PING TOWN, DONGGUAN, GUANGDONG, China, 523565., PHONE: 769-8381-7010, FAX: 769-8381-7017,
EMAIL: ulic213@ccicgd.com
Please file revised pages and illustrations in place of material of like identity. New material
should be filed in its proper numerical order.
NOTE: Follow-Up Service Procedure revisions DO NOT include Cover Pages, Test Records and Conclusion
Pages. Report revisions DO NOT include Authorization Pages, Indices, Section General Pages and
Appendixes.
Please review this material and report any inaccuracies to UL's Customer Service Professionals.
Contact information for all of UL's global offices can be found at http://ul.com/aboutul/locations.
If you’d like to receive updated materials FASTER, UL offers electronic access and/or delivery of
this material. For more details, contact UL's Customer Service Professionals as shown above.
This material is provided on behalf of UL LLC(UL) or any authorized licensee of UL.
SCL File
UL INSPECTION CENTER 213
ADDENDUM TO TRANSMITTAL LETTER
XIAOBO HU
WENZHOU LONGHUA DAILY ELECTRON CO LTD
3 BLDG, PART C
XIXI INDUSTRY ZONE Date: 2016/06/14
HONGQIAO Subscriber: 118317001
YUEQING PartySite: 536596
ZHEJIANG 325608 CHINA File No: E258930
Project No: 4787460459
PD No: 16M28053
Type: R
PO Number:
Subject: Procedure And/Or Report Material
The following material resulting from the investigation under the above numbers is enclosed.
Issue
Date Vol Sec Pages Revised Date
INDEX
INDEX
LH-M-080-3-HS, LH-S-280-11-HS,
LH-HD-400-16-HS,LH-M-100-4-HS, LH-S-290-12-
HS, LH-HD-450-18-HS, LH-M-120-5-HS,
LH-S-300-12-HS, LH-HD-500-20-HS,
LH-M-130-5-HS, LH-S-310-12-HS,
LH-HD-540-21-HS, LH-M-150-6-HS,
LH-S-350-14-HS, LH-HD-550-22-HS,
LH-M-160-6-HS, LH-S-360-14-HS,
LH-EHD-400-16-HS, LH-M-200-8-HS,
LH-S-370-15-HS, LH-EHD-450-18-HS,
LH-I-140-5-HS, LH-S-380-15-HS,
LH-EHD-500-20-HS, LH-I-150-6-HS,
LH-S-390-16-HS, LH-EHD-550-21-HS,
LH-I-180-7-HS, LH-S-400-16-HS,
LH-EHD-560-22-HS, LH-I-200-8-HS,
LH-S-430-17-HS, LH-EHD-610-24-HS,
Cable Tie 2
LH-I-250-10-HS, LH-S-450-18-HS,
LH-EHD-760-30-HS, LH-I-280-11-HS,
LH-S-500-20-HS, LH-EHD-780-31-HS,
LH-I-300-12-HS, LH-HD-150-6-HS,
LH-EHD-810-32-HS, LH-I-370-15-HS,
LH-HD-200-8-HS, LH-EHD-920-36-HS,
LH-S-120-5-HS, LH-HD-220-8-HS,
LH-EHD-1220-48-HS, LH-S-160-6-HS,
LH-HD-250-10-HS, LH-HSD-530-21-HS,
LH-S-180-7-HS, LH-HD-280-11-HS,
LH-HSD-650-26-HS, LH-S-190-8-HS,
LH-HD-300-12-HS, LH-HSD-1000-34-HS,
LH-S-200-8-HS, LH-HD-350-14-HS,
LH-HSD-1030-35-HS, LH-S-250-10-HS,
LH-HD-365-14-HS, LH-R-S-200-8-HS,
LH-HD-380-15-HS, LH—R-S-300-12-HS
INDEX
INDEX
LH-MT-I-150-6-UVB, LH-MT-S-370-14-UVB,
LH-MT-S-160-6-UVB, LH-MT-HD-300-12-UVB,
Screw Mount 4
LH-MT-S-200-8-UVB, LH-MT-HD-400-15-UVB,
LH-MT-S-300-12-UVB
LH—R-SH-150-6-UVB, LH-R-SH-300-12-UVB,
LH-R-SH-200-8-UVB, LH-R-SH-370-14-UVB, Releasable 4
LH-R-SH-250-10-UVB
*
File E258930 Vol. 2 Index Page 5 Issued: 2014-03-12
Revised: 2016-06-14
INDEX
Compliance Criteria - The lot shall be rejected when any of the features
described above is not as specified in the Procedure.
Resubmittal of Rejected Lots - The manufacturer may elect to screen all
positioning devices in the rejected lot and resubmit it. The UL
Representative shall then select two additional samples for the inspection.
If any one of the samples of the resubmitted lot is not in compliance with
the criteria stated above, the lot shall be rejected and may not bear the
Listing Mark.
UL shall have access to the plastic molding operation when the molding of
non-metallic ties or polymeric portions of composite ties is conducted at the
manufacturer. Additionally, they should have access to areas where a coating
is applied to a metallic coated product.
The Field Representative shall have free, unannounced, and immediate access
to the factory and the storage facility during all business hours of the
factory or storage facility. The Field Representative shall also have access
to the records required below.
The manufacturer shall mark each tie or fixing device, cartons containing
ties and/or fixing devices, or a tag/label accompanying the ties and/or
fixing devices such that the Field Representative can trace the origin of
each tie and/or fixing device to a specific batch.
The manufacturer shall keep records for each lot of ties and fixing devices
molded.
File E258930 Vol. 2 App. B Page 1 Issued: 2014-03-08
Revised: 2016-06-14
GENERAL
SELECTION GUIDELINES
Key:
IR – Infrared Spectroscopy
TGA – Thermogravimetry
DSC – Differential Scanning Calorimetry
AR – As Received (Moisture stabilized for non-metallic and composite ties and
fixing devices)
T/C – Thermal Cycling
*
File E258930 Vol. 2 App. B Page 3 Issued: 2014-03-08
Revised: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
or Prog Tensile Mech.
#/Gp/ Report Fig./ ram Str. (N) Strength
Gp Year Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
LH-M-080-3
LH-M-100-4
LH-M-120-5
1 1 LH-M-130-5 1 21 1 A - - - 80 (18) -
LH-M-150-6
LH-M-160-6
LH-M-200-8
LH-M-260-10
LH-M-380-15
LH-I-140-5
LH-I-150-6
LH-I-180-7
2 1 LH-I-200-8 1 21 2 A - - - 180 (40) -
LH-I-250-10
LH-I-280-11
LH-I-300-12
LH-I-370-15
LH-S-120-5
LH-S-160-6
LH-S-180-7
LH-S-190-8
LH-S-200-8
LH-S-250-10
LH-S-280-11
LH-S-290-12
LH-S-300-12
3 1 LH-S-310-12 1 21 3 A - - - 220 (50) -
LH-S-350-14
LH-S-360-14
LH-S-370-15
LH-S-380-15
LH-S-390-16
LH-S-400-16
LH-S-430-17
LH-S-450-18
LH-S-500-20
LH-S-550-21
LH-S-610-24
LH-S-740-29
LH-S-920-36
File E258930 Vol. 2 App. B Page 4 Issued: 2014-03-08
Revised: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
or Prog Tensile Mech.
#/Gp/ Report Fig./ ram Str. (N) Strength
Gp Year Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
LH-HD-150-6
LH-HD-200-8
LH-HD-220-8
LH-HD-250-10
LH-HD-280-11
LH-HD-300-12
LH-HD-350-14
4 1 LH-HD-365-14 1 21 4 A - - - 550 (120) -
LH-HD-380-15
LH-HD-400-16
LH-HD-450-18
LH-HD-500-20
LH-HD-540-21
LH-HD-550-22
LH-HD-610-24
LH-HD-750-30
LH-EHD-400-16
LH-EHD-450-18
LH-EHD-500-20
5 1 LH-EHD-550-21 1 21 5 A - - - 800 (175) -
LH-EHD-560-22
LH-EHD-610-24
LH-EHD-710-28
LH-EHD-750-29
LH-EHD-760-30
LH-EHD-780-31
LH-EHD-810-32
LH-EHD-920-36
LH-EHD-1020-40
LH-EHD-1168-46
LH-EHD-1220-48
LH-EHD-1530-60
File E258930 Vol. 2 App. B Page 5 Issued: 2014-03-08
Revised: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
or Prog Tensile Mech.
#/Gp/ Report Fig./ ram Str. (N) Strength
Gp Year Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
6 1 LH-HSD-230-9 1 21 6 A - - - 1200 (250) -
LH-HSD-290-11
LH-HSD-380-15
LH-HSD-480-19
LH-HSD-530-21
LH-HSD-580-22
LH-HSD-650-26
LH-HSD-730-28
LH-HSD-880-34
LH-HSD-1000-34
LH-HSD-1030-35
LH-R-S-160-6
7 1 LH-R-S-200-8 1 21 7 A - - - 220 (50) -
LH—R-S-300-12
LH-R-S-370-14
LH—R-SH-150-6
8 1 LH-R-SH-200-8 1 21 8 A - - - 220 (50) -
LH-R-SH-250-10
LH-R-SH-300-12
LH-R-SH-370-14
9 1 LH-M-M-100-4 1 21 9 A - - - 80 (18) -
9 1 LH-M-S-200-8 1 21 10 A - - - 80 (18) -
LH-M-080-3-HS
LH-M-100-4-HS
LH-M-120-5-HS
10 1 LH-M-130-5-HS 2 21 1 A - - - 80 (18) -
LH-M-150-6-HS
LH-M-160-6-HS
LH-M-200-8-HS
File E258930 Vol. 2 App. B Page 11 Issued: 2014-03-08
Revised: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
or Prog Tensile Mech.
#/Gp/ Report Fig./ ram Str. (N) Strength
Gp Year Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
LH-S-120-5-UVB
LH-S-160-6-UVB
LH-S-180-7-UVB
LH-S-190-8-UVB
LH-S-200-8-UVB
LH-S-250-10-UVB
LH-S-280-11-UVB
LH-S-290-12-UVB
30 1 LH-S-300-12-UVB 4 21 3 A - - - 220 (50) -
LH-S-310-12-UVB
LH-S-350-14-UVB
LH-S-360-14-UVB
LH-S-370-15-UVB
LH-S-380-15-UVB
LH-S-390-16-UVB
LH-S-400-16-UVB
LH-S-430-17-UVB
LH-S-450-18-UVB
LH-S-500-20-UVB
LH-S-550-21-UVB
LH-S-610-24-UVB
LH-S-740-29-UVB
LH-S-920-36-UVB
File E258930 Vol. 2 App. B Page 12 Issued: 2014-03-08
Revised: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
#/G or Prog Tensile Mech.
p/Y Report Fig./ ram Str. (N) Strength
Gp ear Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
LH-HD-150-6-UVB
LH-HD-200-8-UVB
LH-HD-220-8-UVB
LH-HD-250-10-UVB
LH-HD-280-11-UVB
LH-HD-300-12-UVB
LH-HD-350-14-UVB
31 1 LH-HD-365-14-UVB 4 21 4 A - - - 550 (120) -
LH-HD-380-15-UVB
LH-HD-400-16-UVB
LH-HD-450-18-UVB
LH-HD-500-20-UVB
LH-HD-540-21-UVB
LH-HD-550-22-UVB
LH-HD-610-24-UVB
LH-HD-750-30-UVB
LH-EHD-400-16-UVB
LH-EHD-450-18-UVB
LH-EHD-500-20-UVB
LH-EHD-550-21-UVB
LH-EHD-560-22-UVB
LH-EHD-610-24-UVB
LH-EHD-710-28-UVB
32 1 LH-EHD-750-29-UVB 4 21 5 A - - - 800 (175) -
LH-EHD-760-30-UVB
LH-EHD-780-31-UVB
LH-EHD-810-32-UVB
LH-EHD-920-36-UVB
LH-EHD-1020-40-UVB
LH-EHD-1168-46-UVB
LH-EHD-1220-48-UVB
LH-EHD-1530-60-UVB
File E258930 Vol. 2 App. B Page 12A Issued: 2014-03-08
New: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
#/G or Prog Tensile Mech.
p/Y Report Fig./ ram Str. (N) Strength
Gp ear Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
LH-HSD-230-9-UVB `
LH-HSD-290-11-UVB
LH-HSD-380-15-UVB
LH-HSD-480-19-UVB
LH-HSD-530-21-UVB
33 1 LH-HSD-580-22-UVB 4 21 6 A - - - 1200 (250) -
LH-HSD-650-26-UVB
LH-HSD-730-28-UVB
LH-HSD-880-34-UVB
LH-HSD-1000-34-UVB
LH-HSD-1030-35-UVB
File E258930 Vol. 2 App. B Page 13 Issued: 2014-03-08
Revised: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
or Prog Tensile Mech.
#/Gp/ Report Fig./ ram Str. (N) Strength
Gp Year Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
LH-R-S-160-6-UVB
34 1 LH-R-S-200-8-UVB 4 21 7 A - - - 220 (50) -
LH—R-S-300-12-UVB
LH-R-S-370-14-UVB
LH—R-SH-150-6-UVB
1 LH-R-SH-200-8-UVB 4 21 8 A - - - 220 (50) -
LH-R-SH-250-10-
UVB
LH-R-SH-300-12-
UVB
LH-R-SH-370-14-
UVB
35 1 LH-M-M-100-4-UVB 4 21 9 A - - - 80 (18) -
35 1 LH-M-S-200-8-UVB 4 21 10 A - - - 80 (18) -
*
File E258930 Vol. 2 App. B Page 13A Issued: 2014-03-08
Revised: 2016-06-14
TABLE 2
Index to Testing
Sec. Test ID Ref Dates Min. Loop Min.
or Prog Tensile Mech.
#/Gp/ Report Fig./ ram Str. (N) Strength
Gp Year Catalog No. Date Type Ill. Code IR TGA DSC (N)
Non-Metallic Cable Ties
48 1 LH-DS-200-8 1 21 11 A - - - 356(80) -
LH-DS-280-11 1 21 11 A - - - 356(80) -
LH-DS-360-14 1 21 11 A - - - 356(80) -
LH-DS-430-17 1 21 11 A - - - 356(80) -
LH-DS-200-8-UVB 1 21 11 A - - - 356(80) -
LH-DS-280-11-UVB 1 21 11 A - - - 356(80) -
LH-DS-360-14-UVB 1 21 11 A - - - 356(80) -
LH-DS-430-17-UVB 1 21 11 A - - - 356(80) -
49 1 LH-ES-200-8 1 21 16 A - - - 230(50) -
1 LH-ES-280-11 1 21 16 A - - - 230(50) -
1 LH-ES-360-14 1 21 16 A - - - 230(50) -
1 LH-ES-200-8-UVB 1 21 16 A - - - 230(50) -
1 LH-ES-280-11-UVB 1 21 16 A - - - 230(50) -
1 LH-ES-360-14-UVB 1 21 16 A - - - 230(50) -
50 1 LH-75S-200-8-UVB 1 21 17 A - - - 334(75) -
1 LH-75S-200-8 1 21 17 A - - - 334(75) -
1 LH-75S-280-11-UVB 1 21 17 A - - - 334(75) -
1 LH-75S-280-11 1 21 17 A - - - 334(75) -
1 LH-75S-360-14-UVB 1 21 17 A - - - 334(75) -
1 LH-75S-360-14 1 21 17 A - - - 334(75) -
For fixing devices and integral fixing devices, test panels with mounting holes predrilled must be
provided. The appropriate mounting hardware should also be provided, i.e. machine screws, etc.
File E258930 Vol. 2 App. C Page 1 Issued: 2014-03-08
Revised: 2016-06-14
GENERAL
Method
Type 1 or 11 – The cable ties (all 10 samples) shall meet the minimum load
rating specified.
Type 2 and 21 – The cable ties (all 10 samples) shall maintain their rated
load for one minute.
Type 2S and 21S – The cable ties (all 10 samples) shall maintain their rated
load for five minutes.
LOOP TENSILE STRENGTH TEST FOR CABLE TIES, THERMAL CYCLING CONDITION
Method
Type 1 or 11 – The cable ties (all 10 samples) shall maintain 50% of the
rated load specified.
Type 2 and 21 – The cable ties (all 10 samples) shall maintain their rated
load for one minute.
Type 2S and 21S – The cable ties (all 10 samples) shall maintain their rated
load for five minutes.
File E258930 Vol. 2 App. C Page 2 Issued: 2014-03-08
Revised: 2016-06-14
Method
Type 11 – The fixing devices (all 10 samples) shall meet the minimum load
rating specified.
Type 2 and 21 – The fixing devices (all 10 samples) shall maintain their
rated load for one minute.
Type 2S and 21S – The fixing devices (all 10 samples) shall maintain their
rated load for five minutes.
Method
Type 11 – The fixing devices (all 10 samples) shall maintain 50% of the rated
load specified.
Type 2 and 21 – The fixing devices (all 10 samples) shall maintain their
rated load for one minute.
Type 2S and 21S – The fixing devices (all 10 samples) shall maintain their
rated load for five minutes.
File E258930 Vol. 2 App. C Page 3 Issued: 2014-03-08
Revised: 2016-06-14
PLASTIC ID TESTS
Method
The IR spectrum obtained from the current sample shall not indicate any
significant differences in comparison to the reference spectrum obtained
under the original investigation, in accordance with Appendix A of UL 746A.
The sample shall be considered non-conforming if it's IR spectrum:
(b) does not exhibit one or more transmittance bands which are
evident in the reference spectrum.
THERMOGRAVIMETRY (TGA):
Method
MANUFACTURER' S RESPONSIBILITIES
GENERAL
CONSTRUCTION CONSIDERATIONS
The manufacturer shall verify compliance with the applicable descriptions and
requirements contained in this Procedure.
*
File E258930 Vol. 2 App. D Page 3 Issued: 2014-03-08
Revised: 2016-06-14
DESCRIPTION
PRODUCT COVERED:
USL, CNL:
Non Metallic Cable Ties,
Non Metallic Cable Ties with Integral Mounts,
Fixing Devices
USL:
Non Metallic Cable Ties,
C161844507
File E258930 Vol. 2 Sec. 1 ILL-4 Issued: 2014-03-08
And Report Revised: 2016-06-14
C161844508
File E258930 Vol. 2 Sec. 1 ILL-5 Issued: 2014-03-08
And Report Revised: 2016-06-14
C161844509
File E258930 Vol. 2 Sec. 1 ILL-6 Issued: 2014-03-08
And Report Revised: 2016-06-14
C161844510
File E258930 Vol. 2 Sec. 4 Page 1 Issued: 2014-03-11
and Report Revised: 2016-06-14
DESCRIPTION
PRODUCT COVERED:
USL, CNL:
Non Metallic Cable Ties,
Non Metallic Cable Ties with Integral Mounts
LH-EHD-400-16-UVB 21 9.0 115.0 800 (175) -40(-40) 85(185) -10(14) Indoor/ AH-2 A 5
(0.354) (4.527) Outdoor
LH-EHD-450-18-UVB 9.0 130.5
(0.354) (5.137)
LH-EHD-500-20-UVB 9.0 146.5
(0.354) (5.767)
LH-EHD-550-21-UVB 9.0 163.5
(0.354) (6.437)
LH-EHD-560-22-UVB 9.0 165.5
(0.354) (6.515)
LH-EHD-610-24-UVB 9.0 181.5
(0.354) (7.145)
LH-EHD-710-28-UVB 9.0 195.0
(0.354) (7.677)
LH-EHD-750-29-UVB 9.0 205.0
(0.354) (8.071)
LH-EHD-760-30-UVB 21 9.0 229.5 800 (175) -40(-40) 85(185) -10(14) Indoor/ AH-2 A 5
(0.354) (9.035) Outdoor
LH-EHD-780-31-UVB 9.0 235.5
(0.354) (9.271)
LH-EHD-810-32-UVB 9.0 245.0
(0.354) (9.645)
LH-EHD-920-36-UVB 9.0 280.0
(0.354) (11.023)
LH-EHD-1020-40-UVB 9.0 295.0
(0.354) (11.614)
LH-EHD-1168-46-UVB 9.0 340.0
(0.354) (13.386)
LH-EHD-1220-48-UVB 9.0 375.5
(0.354) (14.783)
LH-EHD-1530-60-UVB 9.0 450.0
(0.354) (17.717)
File E258930 Vol. 2 Sec. 4 Page 9A Issued: 2014-03-11
and Report New: 2016-06-14
C161844512
File E258930 Vol. 2 Sec. 4 ILL-4 Issued: 2014-03-11
And Report Revised: 2016-06-14
C161844513
File E258930 Vol. 2 Sec. 4 ILL-5 Issued: 2014-03-11
And Report Revised: 2016-06-14
C161844514
File E258930 Vol. 2 Sec. 4 ILL-6 Issued: 2014-03-11
And Report Revised: 2016-06-14
C161844515
CERTIFICATE OF COMPLIANCE
Certificate Number 20160614-E258930
Report Reference E258930-20140308
Issue Date 2016-JUNE-14
Standard(s) for Safety: UL 62275, Cable Management Systems - Cable Ties for
Electrical Installations
CSA C22.2 No. 62275, Cable Management Systems -
Cable Ties for Electrical Installations
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
CERTIFICATE OF COMPLIANCE
Certificate Number 20160614-E258930
Report Reference E258930-20140308
Issue Date 2016-JUNE-14
This is to certify that representative samples of the product as specified on this certificate were tested
according to the current UL requirements.
USL/CNL: Non Metallic Cable Ties, Non Metallic Cable Ties with Integral Mounts, Fixing Devices, Conventional
Cable Ties, Models LH-M-080-3, LH-S-160-6, LH-S-550-21, LH-EHD-450-18, LH-M-100-4, LH-S-180-7, LH-S-
920-36, LH-EHD-500-20, LH-M-120-5, LH-S-190-8, LH-HD-150-6, LH-EHD-550-21, LH-M-130-5, LH-S-200-8, LH-
HD-200-8, LH-EHD-560-22, LH-M-150-6, LH-S-250-10, LH-HD-220-8, LH-EHD-610-24, LH-M-160-6, LH-S-280-
11, LH-HD-250-10, LH-EHD-760-30, LH-M-200-8, LH-S-290-12, LH-HD-280-11, LH-EHD-780-31, LH-M-260-10,
LH-S-300-12, LH-HD-300-12, LH-EHD-810-32, LH-M-380-15, LH-S-310-12, LH-HD-350-14, LH-EHD-920-36, LH-
I-140-5, LH-S-350-14, LH-HD-365-14, LH-EHD-1220-48, LH-I-150-6, LH-S-360-14, LH-HD-380-15, LH-HSD-530-
21, LH-I-180-7, LH-S-370-15, LH-HD-400-16, LH-HSD-650-26, LH-I-200-8, LH-S-380-15, LH-HD-450-18, LH-
HSD-1000-34, LH-I-250-10, LH-S-390-16, LH-HD-500-20, LH-HSD-1030-35, LH-I-280-11, LH-S-400-16, LH-HD-
540-21, LH-R-S-160-6, LH-I-300-12, LH-S-430-17, LH-HD-550-22, LH-R-S-200-8, LH-I-370-15, LH-S-450-18, LH-
HD-750-30, LH--R-S-300-12, LH-S-120-5, LH-S-500-20, LH-EHD-400-16, LH-R-S-370-14, LH-DS-200-8, LH-DS-
280-11, LH-DS-360-14, LH-DS-430-17, LH-DS-200-8-UVB, LH-DS-280-11-UVB, LH-DS-360-14-UVB, LH-DS-
430-17-UVB, LH-75S-200-8, LH-75S-280-11, LH-75S-360-14, LH-75S-200-8-UVB, LH-75S-280-11-UVB, LH-75S-
360-14-UVB, LH-S-610-24, LH-S-740-29, LH-HD-610-24, LH-EHD-710-28, LH-EHD-750-29, LH-EHD-1020-40,
LH-EHD-1168-46, LH-EHD-1530-60, LH-HSD-230-9, LH-HSD-290-11, LH-HSD-380-15, LH-HSD-480-19, LH-
HSD-580-22, LH-HSD-730-28, LH-HSD-880-34
USL: Non Metallic Cable Ties, Conventional Cable Ties, Models LH-ES-200-8, LH-ES-280-11, LH-ES-360-14, LH-
ES-200-8-UVB, LH-ES-280-11-UVB, LH-ES-360-14-UVB
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 2
File E258930 Vol. 2 Sec. 1 Page 1 Issued: 2014-03-08
and Report Revised: 2016-06-14
DESCRIPTION
PRODUCT COVERED:
USL, CNL:
Non Metallic Cable Ties,
Non Metallic Cable Ties with Integral Mounts,
Fixing Devices
USL:
Non Metallic Cable Ties,
C161844507
File E258930 Vol. 2 Sec. 1 ILL-4 Issued: 2014-03-08
And Report Revised: 2016-06-14
C161844508
File E258930 Vol. 2 Sec. 1 ILL-5 Issued: 2014-03-08
And Report Revised: 2016-06-14
C161844509
File E258930 Vol. 2 Sec. 1 ILL-6 Issued: 2014-03-08
And Report Revised: 2016-06-14
C161844510
CERTIFICATE OF COMPLIANCE
Certificate Number 20160614-E258930
Report Reference E258930-20140311
Issue Date 2016-JUNE-14
Standard(s) for Safety: UL 62275, Cable Management Systems - Cable Ties for
Electrical Installations
CSA C22.2 No. 62275, Cable Management Systems -
Cable Ties for Electrical Installations
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
CERTIFICATE OF COMPLIANCE
Certificate Number 20160614-E258930
Report Reference E258930-20140311
Issue Date 2016-JUNE-14
This is to certify that representative samples of the product as specified on this certificate were tested
according to the current UL requirements.
USL/CNL: Non Metallic Cable Ties, Non Metallic Cable Ties with Integral Mounts, Conventional Cable Ties,
Models
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 2
File E258930 Vol. 2 Sec. 4 Page 1 Issued: 2014-03-11
and Report Revised: 2016-06-14
DESCRIPTION
PRODUCT COVERED:
USL, CNL:
Non Metallic Cable Ties,
Non Metallic Cable Ties with Integral Mounts
LH-EHD-400-16-UVB 21 9.0 115.0 800 (175) -40(-40) 85(185) -10(14) Indoor/ AH-2 A 5
(0.354) (4.527) Outdoor
LH-EHD-450-18-UVB 9.0 130.5
(0.354) (5.137)
LH-EHD-500-20-UVB 9.0 146.5
(0.354) (5.767)
LH-EHD-550-21-UVB 9.0 163.5
(0.354) (6.437)
LH-EHD-560-22-UVB 9.0 165.5
(0.354) (6.515)
LH-EHD-610-24-UVB 9.0 181.5
(0.354) (7.145)
LH-EHD-710-28-UVB 9.0 195.0
(0.354) (7.677)
LH-EHD-750-29-UVB 9.0 205.0
(0.354) (8.071)
LH-EHD-760-30-UVB 21 9.0 229.5 800 (175) -40(-40) 85(185) -10(14) Indoor/ AH-2 A 5
(0.354) (9.035) Outdoor
LH-EHD-780-31-UVB 9.0 235.5
(0.354) (9.271)
LH-EHD-810-32-UVB 9.0 245.0
(0.354) (9.645)
LH-EHD-920-36-UVB 9.0 280.0
(0.354) (11.023)
LH-EHD-1020-40-UVB 9.0 295.0
(0.354) (11.614)
LH-EHD-1168-46-UVB 9.0 340.0
(0.354) (13.386)
LH-EHD-1220-48-UVB 9.0 375.5
(0.354) (14.783)
LH-EHD-1530-60-UVB 9.0 450.0
(0.354) (17.717)
File E258930 Vol. 2 Sec. 4 Page 9A Issued: 2014-03-11
and Report New: 2016-06-14
C161844512
File E258930 Vol. 2 Sec. 4 ILL-4 Issued: 2014-03-11
And Report Revised: 2016-06-14
C161844513
File E258930 Vol. 2 Sec. 4 ILL-5 Issued: 2014-03-11
And Report Revised: 2016-06-14
C161844514
File E258930 Vol. 2 Sec. 4 ILL-6 Issued: 2014-03-11
And Report Revised: 2016-06-14
C161844515