Professional Documents
Culture Documents
25
mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed
that the main (tangential) cutting force is perpendicular to the friction force
acting at the chip-tool interface. The main (tangential) cutting force is 1500 N.
a. 1000
b. 1500
c. 2000
d. 2500
Q.2 Tool life testing on a lathe on a dry cutting condition gave the value of ‘n’ & ‘c’
of taylor’s tool life equation a 0.12 & 130. When coolent was used ‘c’ is increased
by 10%. Find the percentage increase in tool life at a cutting speed 90m/min.