Professional Documents
Culture Documents
Building at Patan
ABSTRACT SHEET
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
1.0 196.96 Providing & Supplying non-asbestos 1560.00 15.60 1575.60 Sq. Mt 310330.18
Cellulose Cement Board of SHERA
FLEXY BOARD in False Ceiling celluloid
make to the Alluminium
tubular/rolled section as framing of
Cladding on Ceiling 6mm thick of
approved make and size preferably
1200 mm in width fixed with s.s.
screw, royal paint colour painting two
coats etc. complete & work shall be
done as per drawing and as directed
by the Engineer in Charge.
2.0 1.00 Providing & Supplying Wooden 38500.00 385.00 38885.00 Nos. 38885.00
Executive Table Having Size of 2400
(L) X 1200 (W) X 760 (H) mm with
necessary wooden with 8mm glass on
laminated top supports and framing
of 18 mm thick BWP plywood or
equivalent and 1 mm thickness
Laminate/Veneer with cost of all
material & Labours with inside one
primer coat Colour, SS Studs and box
with Three Drawers & necessary
fixtures and fastenings. The work shall
be done as per drawing or directed by
Engineer In charge.
Page 1 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
3.0 1.00 Providing & Supplying Wooden Table 11615.00 116.15 11731.15 Nos. 11731.15
Having Size of 1800 (L) X 1000 (W) X
760 (H) mm with necessary wooden
with 8mm glass on laminated top
supports and framing of 18 mm thick
BWP plywood or equivalent and 1 mm
thickness Laminate/Veneer with cost
of all material & Labours with inside
one primer coat Colour, SS Studs and
box with Three Drawers & necessary
fixtures and fastenings. The work shall
be done as per drawing or directed by
Engineer In charge.
4.0 2.00 Providing & Supplying Wooden Table 8585.00 85.85 8670.85 2.00 17341.70
Having Size of 1520 (L) X 900 (W) X
760 (H) mm with necessary wooden
with 8mm glass on laminated top
supports and framing of 18 mm thick
BWP plywood or equivalent and 1 mm
thickness Laminate/Veneer with cost
of all material & Labours with inside
one primer coat Colour, SS Studs and
box with Three Drawers & necessary
fixtures and fastenings. The work shall
be done as per drawing or directed by
Engineer In charge.
Page 2 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
5.0 1.00 Providing & Supplying Wooden Office 8550.00 85.50 8635.50 Nos. 8635.50
Table with necessary wooden with
8mm glass on laminated top having
1200 (L) X 750 (W) X 760 (H) using 18
mm thick BWP plywood & 25mm &
50mm X 12mm Teakwood patti,
formica, handle, fastening & fixture
including cost of all material &
Labours with drawer & shutter, inside
one priming coat and two coat of oil
painting. etc. complete as per drawing
or directed by Engineer in charge.
6.0 13.00 Providing & Supplying Wooden Office 11558.00 115.58 11673.58 Nos. 151756.54
Table with necessary wooden with
8mm glass on laminated top having
1000 (L) X 750 (W) X 760 (H) using 18
mm thick BWP plywood & 25mm &
50mm X 12mm Teakwood patti,
formica, handle, fastening & fixture
including cost of all material &
Labours with drawer & shutter, inside
one priming coat and two coat of oil
painting. etc. complete as per drawing
or directed by Engineer in charge.
7.0 6.00 Providing & Supplying Wooden One 8000.00 80.00 8080.00 Nos. 48480.00
Seater SOFA made using Indian Teak
wood in framing and support of
19mm thick WP plywood, box of the
sofa made with 100mm Thick High
Density 'U' foam in seat and 50mm
Thick High Density 'U' foam in back
rest portion with imported POLYTEEL
recron covering on back portion with
textured TAPESTRY black Leather
covering and S.S. legs with necessary
fixtures & fastening etc., competed or
as directed by Engineer in Charge.
Page 3 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
8.0 5.00 Providing & Supplying Wooden Two 10000.00 100.00 10100.00 Nos. 50500.00
Seated SOFA made using Indian Teak
wood in framing and support of
19mm thick WP plywood, box of the
sofa made with 100mm Thick High
Density 'U' foam in seat and 50mm
Thick High Density 'U' foam in back
rest portion with imported POLYTEEL
recron covering on back portion with
textured TAPESTRY black Leather
covering and S.S. legs with necessary
fixtures & fastening etc., competed or
as directed by Engineer in Charge.
9.0 1.00 Providing & Supplying Wooden Three 12000.00 120.00 12120.00 Nos. 12120.00
Seated SOFA made using Indian Teak
wood in framing and support of
19mm thick WP plywood, box of the
sofa made with 100mm Thick High
Density 'U' foam in seat and 50mm
Thick High Density 'U' foam in back
rest portion with imported POLYTEEL
recron covering on back portion with
textured TAPESTRY black Leather
covering and S.S. legs with necessary
fixtures & fastening etc., competed or
as directed by Engineer in Charge.
10.0 3.00 Providing & Supplying Coffee Table 3105.00 31.05 3136.05 Nos. 9408.15
with necessary wooden supports and
framing of 18mm Century make or
equivalent plywood, formica/veneer
laminated in combination of Indian
teak wood, top with 8mm Saint
Gobain glass or equivalent with
necessary fittings, fixtures & fastening
etc. complete as directed by Engineer
in Charge.
Page 4 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
11.0 3.00 Providing & Supplying PRO-Active 11600.00 116.00 11716.00 Nos 35148.00
Revolving High Back Chair, having: 1)
Single-Position locking Synchro Tilt
Mechanism. 2) 5-Prong Nylon high-
rise base heavy duty twin wheeled
nylon castors. 3) Elegant Height
adjusting PU padded armrest. 4) Class
IV gas lift as per DIN standards. 5)
Elegant Leather upholstery, as per
sample approved of
Featherlite.Amber Make.
12.0 5.00 Providing & Supplying Contact Flex- 3105.75 31.06 3136.81 Nos 15684.04
MB Revolving Mid Back Chair single
position locking Synchro tilt
mechanism with 'return-prevention'
facility with heavy duty with nylon
castors wheels elegant fabric,
upholstery for seat and nylon mesh
for back etc.
13.0 16.00 Providing & Supplying Eco Revolving & 3000.00 30.00 3030.00 Nos 48480.00
PushBack Chairs. It consists of a nylon
base, cushioned seat and back.
Synchro mechanisn & 2 way
adjustable arms.
14.0 36.00 Providing and supplying Genesis Non 2000.00 20.00 2020.00 Nos 72720.00
Revolving Visitor Chairs they are
comfortable and appropriately
designed office visitor chairs are
specially made using superior quality
fabric. They have a special cushioned
seats which provide complete
comfort. These chairs are made using
superior grade materials.
Page 5 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
15.0 85.00 Providing & supplying Visitor Chair E- 2850.00 28.50 2878.50 Nos 244672.50
PRO centiliver with writing pad, BB-
EP1 - CT Subject to Sample Approve as
per dericted by Eng. In Charge. BLUE
BELL, GODREJ - HOF
16.0 34.00 Providing & Supplying Steel Storwell 16400.00 164.00 16564.00 Nos. 563176.00
(Godrej Make) having dimensions -
900 (W) X 507 (D) X 1950 (L) mm
made up of 20 gauge M. S. Steel
Section, with 04 Nos. adjustables
shelfes, good quality locking system,
powder coated etc. complete, as
directed by the Engineer in Charge.
17.0 4.00 Providing & Supplying Godrej make or 25622.00 256.22 25878.22 Nos 103512.88
equivalent Books Storage Sliding Door
Cub Board having Size-1830mm
Height X 900mm Width X
450mmDepth 04 Nos. of full shelves,
work shall be done as per drawing or
directed by Engineer in Charge.
18.0 24.70 Providing & Supplying Wooden Cup 8967.00 89.67 9056.67 Sq. Mt. 223699.75
Board (Wall Mounted) of 1800 (L) X
400 (D) X 500 (H) mm using 19mm
thick WP plywood & 25 X 12, 50 X
12mm teak wood patti, formica,
magnet, stopper, handles, fixtures &
fastenings, including cost of all
material & Labours, with one coat
primer & two two coats Oil Painting
inside etc., complete as per detail
approved drawing & as directed by
the Engineer in Charge.
Page 6 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
19.0 1.62 Providing & Supplying Wooden side 11977.00 119.77 12096.77 Sq. Mt. 19596.77
racks of 900 (L) X 400 (W) X 720 (H)
mm using 19mm thick WP plywood &
25 X 12, 50 X 12mm teak wood patti,
formica, magnet, stopper, handles,
fixtures & fastenings, including cost of
all material & Labours, with one coat
primer & two two coats Oil Painting
inside etc., complete as per detail
approved drawing & as directed by
the Engineer in Charge.
20.0 61.20 Providing & Supplying Files Storage 1475.00 14.75 1489.75 Sq. Mt. 91172.70
Racks made out by M.S. slotted angle
of 40 x 40mm (2.5Kg/pcs.) having size
of 900 (L) X 400 (W) X 2000 (H), with
M.S. sheet (3Kg/pcs.) for
partitions/shelves - 07 shelves and
depth 380mm, including Labour,
material etc., complete or as directed
by the Engineer in Charge.
21.0 3.24 Providing & Supplying Files Storage 1010.00 10.10 1020.10 Sq. Mt. 3305.12
Racks made out by M.S. slotted angle
of 40 x 40mm (2.5Kg/pcs.) having size
of 900 (L) X 400 (W) X 1200 (H), with
M.S. sheet (3Kg/pcs.) for
partitions/shelves - 07 shelves and
depth 380mm, including Labour,
material etc., complete or as directed
by the Engineer in Charge.
Page 7 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
22.0 1.00 Providing & Supplying Godrej safe 15899.00 158.99 16057.99 Nos. 16057.99
vault (wall mounted)in account
department for cashier having size of
490 x 415 x 470mm made up of 20
gauge M. S. Steel Section, good
quality locking system, powder coated
etc. complete, as directed by the
Engineer in Charge.
23.0 110.0 Providing & Supplying Wooden Dais / 2500.00 25.00 2525.00 Smt. 277750.00
Platform for Class Rooms having Size
of 3640 (L) X 1820 (W) X 230 (H) mm
using with 18 mm BWP plywood
structure & Wooden Beading as per
drawing or directed by the Engineer in
Charge.
24.0 1.0 Providing and Supplying Wooden 7875.00 78.75 7953.75 Nos. 7953.75
Podium having size - 700 (L) X 500 (D)
X 1505 (H) mm made using with 18
mm BWP plywood 1.0 mm thickness
laminate with drawer & necessary
wooden support framing with PU
Polishing, fixture and fastening work
shall be done as per drawing &
sample approved as directed by the
Engineer in Charge.
Page 8 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
25.0 1.0 Providing & Supplying Projector-3500 125000.00 1250.00 126250.00 Nos. 126250.00
ANSI Lumens 1024 X 768, 4:3 with
3000 pixels video signal SDTV(480i),
EDTV(480p), image size 27" X 300"
with remote control functioning and
attachable with PC, Laptop for display
with necessary wiring, cabling in
ceiling and clamping, hanging, etc.,
complete as directed by Engineer in
Charge.
26.0 1.0 Providing & Supplying Screen for 28497.00 284.97 28781.97 Nos. 28781.97
Projector with motorized screen of 5'
X 7' with standard pure white
fiberglass reinforced vinyl including
quite motor & roller system. Wireless
handheld remote built in - RF (Radio
Frequency) receiver with necessary
attachment etc., complete as directed
by Engineer in Charge.
27.0 28.43 Providing & Supplying curtain of roller 2490.00 24.90 2514.90 Sq. Mt. 71498.61
blinds with roller thread, manual with
nwecessary fittings, fixtures and
fastening etc. complete, as directed
by engineer in charge.
28.0 75.00 Providing & Supplying Curtain of 540.00 5.40 545.40 Sq. Mt. 40905.00
Vertical Blinds with runners, blind
fabric, roller thread manual, powder
coated channel with necessary
fittings, fixtures & fastening for
moving of blinds, etc. completed as
directed by Engineer in Charge.
Page 9 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
29.0 1750.00 Providing & Fixing S.S. Plate Signages 25.00 0.25 25.25 Sq.in 44187.50
having size of 14 in. x 5 in. x 1.0 mm
thick plates of 304 grade mentioning
officers names/ designations etc. as
per directions of the Engineer in
Charge.
30.0 5.00 Providing & Supplying S. S. Waiting 5000.00 50.00 5050.00 Nos. 25250.00
Chair Three Seater the seat should be
made by high quality cold rolling S. S.
plate, legs, arms & back rest are all S.
S. as per image & work shall be done
as per drawing or directed by as per
Engineer in Charge.
(MR)
31.0 4.00 Providing & Erecting Split Air 33000.00 330.00 33330.00 Nos. 133320.00
Conditioners 2 ton min. 5 star or
above rated approved make air-
conditioning unit consisting of
condensing unit with fan motor,
hermetically sealed rotary compressor
with accessories etc. duly connected
separately erected evaporating unit
and blower motor with its accessories
by means of proper insulated copper
tubing upto 5 RMT as per suitable,
cost inclusive of M. S. stand, Gas
charging & internal copper wiring &
remote control etc. complete as (Ele.
SOR 8.3.1 Pg. 150)
32.0 1.00 Providing & Fixing Conference System 125000.00 1250.00 126250.00 Nos. 126250.00
CMC-4100 Chairman Unit (01 No) and
CMD-4200 Delegates Unit (20 Nos.)
AHUJA make, highly sensitive electric
condenser 16" Long microphone for
Conference Table unit, with necessary
attachment etc., complete as directed
by the Engineer in Charge.
(RA-13)
Page 10 of 19
Item Qty. Item No. Rate Labour Net Rate Unit Amt.
No. Cess
@1%
33.0 30.00 Providing &Fixing Stainless Steel 1300.00 13.00 1313.00 Nos. 39390.00
Letters having height of 1.5'
describing 'Pashupalan Niyamakshri ni
Kacheri',shall be fixed as per direction
of the engineer incharge including all
materials and labour charges
etc.,complete.
34.0 2.00 Providing & Supplying a water cooler 20000.00 200.00 20200.00 Nos. 40400.00
having 40 Liters Storage capacity and
20 liters cooling capacity, with
Stanless Steel 304 grade body and
tank. It will be having a puf insulation
and Emerson (Kirlosker ) Tecumesh
Compressor, etc. as per direction of
the Engineer in charge.
35.0 2.00 Providing & Supplying 25 LPH RO 15000.00 150.00 15150.00 Nos. 30300.00
Plant having 0.2 Kg/Cm2 with 100LPH
Duty Cycle and RO membrane of
Micro filter 80GPD (2nos), as per
direction of the engineer in charge
Page 11 of 19
Name of Work: Providing Furniture at Animal & Husbandary Department At Patan
MEASUREMENT SHEET
Deputy Director's office/ Asst Director/ Vet Officer 3.0 3.77 5.77 - 65.26
Meeting hall 1.0 17.84 5.77 - 102.94
Admn & Accont. Officer 1.0 3.84 7.49 - 28.76
Total 196.96 Sq. Mt
2.0 Providing & Supplying Wooden Executive Table Having
Size of 2400 (L) X 1200 (W) X 760 (H) mm with necessary
wooden with 8mm glass on laminated top supports and
framing of 18 mm thick BWP plywood or equivalent and
1 mm thickness Laminate/Veneer with cost of all material
& Labours with inside one primer coat Colour, SS Studs
and box with Three Drawers & necessary fixtures and
fastenings. The work shall be done as per drawing or
directed by Engineer In charge.
Page 12 of 19
Item Item Description Nos L W D/H Qty Unit
No.
4.0 Providing & Supplying Wooden Table Having Size of 1520
(L) X 900 (W) X 760 (H) mm with necessary wooden with
8mm glass on laminated top supports and framing of 18
mm thick BWP plywood or equivalent and 1 mm
thickness Laminate/Veneer with cost of all material &
Labours with inside one primer coat Colour, SS Studs and
box with Three Drawers & necessary fixtures and
fastenings. The work shall be done as per drawing or
directed by Engineer In charge.
Page 13 of 19
Item Item Description Nos L W D/H Qty Unit
No.
8.0 Providing & Supplying Wooden Two Seated SOFA made
using Indian Teak wood in framing and support of 19mm
thick WP plywood, box of the sofa made with 100mm
Thick High Density 'U' foam in seat and 50mm Thick High
Density 'U' foam in back rest portion with imported
POLYTEEL recron covering on back portion with textured
TAPESTRY black Leather covering and S.S. legs with
necessary fixtures & fastening etc., competed or as
directed by Engineer in Charge.
Deputy Director's Office/ Waiting Lounge/ Meeting Hall 3.0 - - - 3.00 Nos.
11.0 Providing & Supplying PRO-Active Revolving High Back
Chair, having: 1) Single-Position locking Synchro Tilt
Mechanism. 2) 5-Prong Nylon high-rise base heavy duty
twin wheeled nylon castors. 3) Elegant Height adjusting
PU padded armrest. 4) Class IV gas lift as per DIN
standards. 5) Elegant Leather upholstery, as per sample
approved of Featherlite.Amber Make.
Page 14 of 19
Item Item Description Nos L W D/H Qty Unit
No.
13.0 Providing & Supplying Eco Revolving & PushBack Chairs.
It consists of a nylon base, cushioned seat and back.
Synchro mechanisn & 2 way adjustable arms.
Page 15 of 19
Item Item Description Nos L W D/H Qty Unit
No.
19.0 Providing & Supplying Wooden side racks of 900 (L) X 400 `
(W) X 720 (H) mm using 19mm thick WP plywood & 25 X
12, 50 X 12mm teak wood patti, formica, magnet,
stopper, handles, fixtures & fastenings, including cost of
all material & Labours, with one coat primer & two two
coats Oil Painting inside etc., complete as per detail
approved drawing & as directed by the Engineer in
Charge.
Page 16 of 19
Item Item Description Nos L W D/H Qty Unit
No.
24.0 Providing and Supplying Wooden Podium having size -
700 (L) X 500 (D) X 1505 (H) mm made using with 18 mm
BWP plywood 1.0 mm thickness laminate with drawer &
necessary wooden support framing with PU Polishing,
fixture and fastening work shall be done as per drawing &
sample approved as directed by the Engineer in Charge.
Deputy Director's office/ Meeting Hall/Class - 1 Officer 7.0 2.25 1.50 - 23.63
Admn & Accont. Officer 4.0 0.60 2 4.80
Total 11.0 - - - 28.43 Sq. Mt.
28.0 Providing & Supplying Curtain of Vertical Blinds with
runners, blind fabric, roller thread manual, powder
coated channel with necessary fittings, fixtures &
fastening for moving of blinds, etc. completed as directed
by Engineer in Charge.
Page 17 of 19
Item Item Description Nos L W D/H Qty Unit
No.
30.0 Providing & Supplying S. S. Waiting Chair Three Seater 5.00 Nos.
the seat should be made by high quality cold rolling S. S.
plate, legs, arms & back rest are all S. S. as per image &
work shall be done as per drawing or directed by as per
Engineer in Charge.
(MR)
31.0 Providing & Erecting Split Air Conditioners 2 ton min. 5 4.00 Nos.
star or above rated approved make air-conditioning unit
consisting of condensing unit with fan motor,
hermetically sealed rotary compressor with accessories
etc. duly connected separately erected evaporating unit
and blower motor with its accessories by means of
32.0 Providing & Fixing
proper insulated Conference
copper tubing uptoSystem
5 RMT CMC-4100
as per 1.00 Nos.
Chairman Unit (01 No) and CMD-4200 Delegates
suitable, cost inclusive of M. S. stand, Gas charging Unit (20
&
Nos.)
internalAHUJA
coppermake,
wiringhighly sensitive
& remote controlelectric condenser
etc. complete as
16"
(Ele. Long microphone
SOR 8.3.1 Pg. 150) for Conference Table unit, with
necessary attachment etc., complete as directed by the
Engineer in Charge.
(RA-13)
Page 18 of 19
Item Item Description Nos L W D/H Qty Unit
No.
30.0 Providing &Fixing Stainless Steel Letters having height of
1.5' describing 'Pashupalan Niyamakshri ni Kacheri',shall
be fixed as per direction of the engineer incharge
including all materials and labour charges etc.,complete.
Asistant Engineer
R&B Sub Division
Patan
Page 19 of 19