Professional Documents
Culture Documents
TaperedRollerBearings TS (TaperedSingle) Imperial
TaperedRollerBearings TS (TaperedSingle) Imperial
Part Number 99600 - 99100, Tapered Roller Bearings - TS (Tapered Single) Imperial
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the
cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series 99000
27.5 lb
Bearing Weight
12.5 Kg
Dimensions
6.0000 in
d - Bore
152.4 mm
11/17/2022 | Page 2 of 4
10 in
D - Cup Outer Diameter
254 mm
2.6250 in
B - Cone Width
66.675 mm
1.8750 in
C - Cup Width
47.625 mm
2.6250 in
T - Bearing Width
66.675 mm
-0.48 in
a - Effective Center Location3
-12.2 mm
231000 lbf
C0 - Static Radial Rating
1030000 N
Factors
K - Factor7 1.43
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
1.8750
0.19
2.6250
10.0000
6.0000
8.94
6.68
7.13
9.38
-0.48
IMPERIAL UNITS
ISO Factor - e 0.41
ISO Factor - Y 1.47 99600 - 99100
Bearing Weight 27.5 lb Tapered Roller Bearings - TS (Tapered Single)
Number of Rollers Per Row 23 Imperial
Effective Center Location -0.48 inch
K Factor 1.43
Dynamic Radial Rating - C90 38500 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 26800 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 231000 lbf
Dynamic Radial Rating - C1 148000 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY