|
1, SPECIFICATIONS
Type:
Gain:
Continuous Average Power Output
Frequency Response:
Distortion:
Hum and Noise:
Input Sensitivity:
Input Impedance:
Input Connector:
Output Connectors:
Controls & Indicators:
Power:
Dimensions:
Weight:
‘Two channel audio power amplifier
26 dB (each channel)
75 watts per channel at 8 ohms
100 watts per channel at 4 ohms
180 watts at Bridged mono at 8 ohms.
Plus/Minus 0.5dB 20Hz-20kHz
No more than 0.25% THD or IM, 0.01W to
rated power, 20Hz to 20kHz (typically 0.02%)
101dB below rated output
(unweighted 20KHz bandwidth)
1.6V RMS for rated output
15K ohms, nominal
(2) Yinch phone jacks and XLR jacks.
(unbalanced and balanced)
Dual 5-way binding posts
(Front Panel) AC main power switch,
Power-on LED indicator,
Signal on LED indicator
Clip LED indicator x 2pes
Channel One and Two level controls
Monitor jacks 2 pes
110-120VACI60Hz |
zeo.eaovacisoHz } Switchable
30W (idle), 300W (maximum)
1-3/4"H (440m) 19"W (48.3cm)
11.9" (30.2cm) behind panel
13” (82.5em) overall
16.2 Ibs (73 kg)ss al
'
| 2, OPERATING THE AB 200
L — —
“FRONT PANEL-
tos
a mel
+ POWER SWITCH
- HEADPHONE MONITOR JACKS.
2. POWER INDICATING LED
4. LEVEL CONTROLS
- CLIP INDICATORS 6. ON INDICATORS
a.
0.
1
3
5.
REAR: 7. UNBALANCED INPUT CORNECTIONS. BALANCED INPUT CONNECTIONS.
@. NORM/HONO SELECTOR SWITCH 10. GROUND/LIFT SWITCH
1. OUTPUT CONNECTIONS.AA
HOLLYOOT SLavd “€ |-
|
4,
1
NN
AVNSTENT AND TEST POINT LOCATIO
INTIAL, SETTINGS:
LEVEL CONTROL: MINIMUM
eM
via
a
a710-PA
MEASURING PONT
i
°
iS
eee
ADLPOINT | MEASURE
TDEL CURRENT ADL
(oeu current aba.
2827,828,
927,928
war | stony |
Tyra01 | 6-10my_|
[OE conn Aoi, |___kez7eze___
(center voutcneck [ct outeut ro oxo | - | _