Professional Documents
Culture Documents
Pile Cap Final Pdf2
Pile Cap Final Pdf2
PILE ARRANGEMENT
Column Dimensions
Column Shape : Rectangular
Column Length - X (Pl) : 1.800 m
Column Width - Z (Pw) : 1.800 m
Pedestal
Include Pedestal? No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Pile Capacities
Axial Capacity PP = 2400.000 kN
Material Properties
Concrete f'c = 35000.006 kN/m^2
Concrete Cover
Bottom Clear Cover CCB = 0.060 m
file:///C:/Staad.foundation%205.3/CalcXsl/PileCapde.xml 01-06-2020
Pile Cap Design Page 2 of 6
_ Arrangement Reaction
Pile X Y Axial Lateral Uplift
No. (m) (m) (kN) (kN) (kN)
1 -3.000 -1.500 -1714.630 187.023 0.000
2 -3.000 1.500 -1714.630 187.023 0.000
3 0.000 -1.500 -1215.182 187.023 0.000
4 0.000 1.500 -1215.182 187.023 0.000
5 3.000 -1.500 -715.734 187.023 0.000
6 3.000 1.500 -715.734 187.023 0.000
Reinforcement Calculation
Maximum bar size allowed along length # 32
Maximum bar size allowed along width # 32
Bending Moment At Critical Section = -7201.312 kNm (Along Length)
Bending Moment At Critical Section = -2187.287 kNm (Along Width)
Pile Cap Thickness t = 2.385 m
Selected bar size along length # 16
Selected bar size along width # 16
Selected bar spacing along length = 68.68 mm
Selected bar spacing along width = 69.76 mm
Critical load case for thickness is reported only when required thickness is more than the given minimum thickness
file:///C:/Staad.foundation%205.3/CalcXsl/PileCapde.xml 01-06-2020
Pile Cap Design Page 3 of 6
We observed Mu <= Mulim hence singly reinforced and under reinforced section can be used
Critical load case for thickness is reported only when required thickness is more than the given minimum thickness
We observed Mu <= Mulim hence singly reinforced and under reinforced section can be used
file:///C:/Staad.foundation%205.3/CalcXsl/PileCapde.xml 01-06-2020
Pile Cap Design Page 4 of 6
Two-way Shear
at column face
Pile No.
(kN)
1 -1116.175
2 -1116.175
3 -198.343
4 -198.343
5 -516.837
6 -516.838
TOTAL -3662.710
file:///C:/Staad.foundation%205.3/CalcXsl/PileCapde.xml 01-06-2020
Pile Cap Design Page 5 of 6
Where,ks = = 1.000
Along Width
Along Length
Critical Load Case : 201
file:///C:/Staad.foundation%205.3/CalcXsl/PileCapde.xml 01-06-2020
Pile Cap Design Page 6 of 6
Smin <= S <= 450 mm and selected bar size < selected maximum bar size... The reinforcement is accepted.
Along Width
Critical Load Case : 201
file:///C:/Staad.foundation%205.3/CalcXsl/PileCapde.xml 01-06-2020