Professional Documents
Culture Documents
The Automotive Test Solution The Pad ROL® 200 XT™ Automotive Contactor improves
test yields and increases test reliability through several
That Drives Toward Higher features, including:
Test Yields
As a designer of high performance devices for the automotive
Electrical Reliability Improves Yields
industry, you know that your applications are growing in both • Patented, One-Piece ROL® Contacts
numbers and complexity. Since this trend is expected to continue
• Delivers Lowest Contact Resistance (CRES)
for the next several years, it is more important than ever to require
extreme versatility and superior reliability from your test solutions. • High Current Carrying Capability
Whether you are testing Audio & Infotainment, Vehicle Networking, • Low Inductance
Powertrain, or other automotive device applications, look for the
• Extremely Stable Contact Restistance (CRES)
solution that drives your results toward higher test yields and
delivers superior production throughput. • High Frequency Capability
• Wiping Contact Clears Debris
Mechanically Robust
• Long Life ROL® Contacts
• Temperature Test Stability
• Patented Wiping Lengthens MTBA
S M A R T. C O N N E C T E D . G L O B A L .
Pad ROL® 200 XT™
Results for 0.5mm pitch configurations shown here. Electrical specifications based on third party measured testing.
* Contact, elastomer, and housing life values are TYPICAL based on Johnstech internal testing. Actual production life will vary based on a wide range of variables including: handler, Contactor, load board interface; handler plunge depth and velocity;
device presentation; alignment plate condition; package plating material and characteristics; test floor conditions; maintenance activities; mounting/fastening techniques; site-to-site co-planarity; docking co-planarity; and temperature extremes.
Methodology
CROSSTALK
Maroon Elastomer
Load Board
Johnstech International Corporation • 1210 New Brighton Boulevard • Minneapolis, MN 55413-1641 USA
Tel 612.378.2020 • Fax 612.378.2030 • www.johnstech.com • E-mail info@johnstech.com
© Copyright
2017-18, Johnstech
2013, Johnstech
International
International
Corporation.
Corporation.
Specifications
Specifications
subjectsubject
to change
to change
without
without
notice.
notice.
No part
No part
of this
of this
document
document
maymay
be reproduced
be reproduced
in any
in any
form
form
or or
bybyany
any
means,
means,electronic
electronicorormechanical,
mechanical,including
includingphotocopying,
photocopying,recording
recording or
or by any
information storage or retrieval system, without expressed written permission from Johnstech. Johnstech and Johnstech logo are registered trademarks in the USA and other countries. Johnstech products and components are covered by patents
and copyrights in the USA and other countries. All other trademarks not owned by Johnstech, which appear within are the property of their respective owners. Please Lit #1504-0214
see, www. johnstech.com/IP for patent information.