Professional Documents
Culture Documents
EG1 BHI Fluids MR 174 202117
EG1 BHI Fluids MR 174 202117
FLUID HYDRAULICS
BIT INFORMATION ANNULAR VELOCITY See Additional Rheology Data as an attachment of this report.
WEIGHT ON BIT (kN) MIN MAX
ON BOTTOM, RPM (rpm) FLUID LOSS Fluid Specs 1 2 3 4
BIT HOURS (h) RISER (m/min) API FILTRATE (cm3) 10.0 10.0 10.0
BIT TFA (mm2) 0 CASING (m/min) CAKE THICKNESS (mm) 1 1 1
BIT JETS (mm) OPEN HOLE (m/min)
Vc, OPEN HOLE (m/min)
BIT HYDRAULICS Vc, DRILL PIPE (m/min)
BIT PRESSURE LOSS (kPa)
NOZZLE VELOCITY (m/s) CIRCULATION RATES CHEMISTRY (WATER BASED) Fluid Specs 1 2 3 4
HHP/AREA (kW/m2) CIRC RATE, HOLE (m3/min) pH 9.4 9.4 9.3
HHP (%) CIRC RATE, RISER (m3/min) ALKALINITY (Pm) (cm3/cm3) 0.15 0.15 0.15
HYDRAULICS ANALYSIS STKS TIME ALKALINITY (Pf) (cm3/cm3) 0.10 0.10 0.10
BEHAVIOR INDEX (n) (SPM) (min) ALKALINITY (Mf) (cm3/cm3) 1.40 1.40 1.40
CONSISTENCY INDEX (K)
(#sec^n/100ft^2) SURFACE TO BIT LIME (kg/m3) 0.0 0.1 0.1
ECD AT BIT DEPTH (sg) BOTTOMS UP TOTAL HARDNESS (kg/m3) 60.0 60.0 60.0
ECD AT CASING SHOE (sg) TOTAL SYSTEM TOTAL CHLORIDES (mg/L) 250 250 260
SALT ION TYPE Na+ Na+ Na+
REMARKS NaCl (mg/L) 413 413 429
FLUID COMMENTS MBT Bent Eq (kg/m3) 8.5 8.5 8.5
Added 1dr of Ecol-Lube to reduce torque. Also added 5sx of soda ash to maintain active system
alkalinity.
Total losses for the last 24 hours were 60m3 of which 56 were lost downhole
RETORT ANALYSIS Fluid Specs 1 2 3 4
WATER (%) 99 99 99
SAND (%) 0.05 0.05 0.05
RETORT SOLIDS (%) 1 1 1
CORRECTED SOLIDS (%) 1 1 1
LGS % (%) 1.42 1.42 1.42
LGS (g/cc) 0.037 0.037 0.037
AVG DENSITY SOLIDS (kg/m3) 3002.53 3002.53 3002.63
DRILL SOLIDS (g/cc) 0.037 0.037 0.037
RIG ACTIVITY DRILL SOLIDS % (%) 1.41 1.41 1.41
Continued to drill ahead to 4,876.8m
Any opinion or recommendation expressed orally or written herein, has been prepared carefully and may be used if the user so elects; however, no representation or warranty is made by ourselves or our agents as to the
correctness or completeness, and no liability is assumed for any damages resulting from the use of the same.
Drilling Fluids
REPORT 154 | 2021-Oct-17
EG-1 | EDEN GEOTHERMAL LTD
SOLIDS CONTROL
# NAME MANUFACTURER HOURS SCREEN SIZES ACTIVE RESERVE
VOLUME LOST VOLUME LOST
(m3) (m3)
IADC HOURS
Wash 6 Drilling Formation 18
SERVICE COSTS
DESCRIPTION QUANTITY UNIT TYPE OF COMMENTS
CHARGE
Any opinion or recommendation expressed orally or written herein, has been prepared carefully and may be used if the user so elects; however, no representation or warranty is made by ourselves or our agents as to the
correctness or completeness, and no liability is assumed for any damages resulting from the use of the same.
Drilling Fluids
REPORT 154 | 2021-Oct-17
EG-1 | EDEN GEOTHERMAL LTD
PRODUCT INVENTORY
PRODUCT NAME UNIT SIZE STARTING TRANSFER RECEIVED RETURNED LOST / DAILY ENDING TOTAL INVENTORY ACTIVE
QTY IN DAMAGED USE QTY USED WEIGHT ENDING CONC
(kg) (kg/m3)
ATTACHMENT: RHEOLOGY
Any opinion or recommendation expressed orally or written herein, has been prepared carefully and may be used if the user so elects; however, no representation or warranty is made by ourselves or our agents as to the
correctness or completeness, and no liability is assumed for any damages resulting from the use of the same.
Drilling Fluids
REPORT 154 | 2021-Oct-17
EG-1 | EDEN GEOTHERMAL LTD
ATTACHMENT: PITS
PITS
PIT NAME STATUS CONTENT PREVIOUS PREVIOUS CURRENT CURRENT TOTAL PIT
VOLUME DENSITY VOLUME DENSITY WEIGHT
(m3) (sg) (m3) (sg) (kg)
Any opinion or recommendation expressed orally or written herein, has been prepared carefully and may be used if the user so elects; however, no representation or warranty is made by ourselves or our agents as to the
correctness or completeness, and no liability is assumed for any damages resulting from the use of the same.