Professional Documents
Culture Documents
FM463 FM466 FA463 Check Crane FS DS 1021 p67
FM463 FM466 FA463 Check Crane FS DS 1021 p67
CHECK VALVES
F
1
4 Seat EPDM Max 120°C
2
5 Stop Bolt Stainless Steel 304
4
H
6 Stem Stainless Steel 304
3
7 Spring Stainless Steel 304
8 Washer PTFE
9 Gasket EPDM Max 120°C
5
PRESSURE RATING: FM463: PN16, FA463: ANSI 125, SPECIFICATION: Designed in accordance with BS EN 16767. Face-to-face
FM466: PN25 dimensions conform to BS EN 558 series 16. Suitable for installation in vertical and
TEMPERATURE OPERATING RANGE: -10 to 120°C horizontal pipelines.
UK END CONNECTION: Suitable for flange connection to When installed in vertical pipelines the flow must be in an upward direction.
BS EN 1092-2 PN16 / BS EN 1092-2 PN25 This valve is suitable for use on Group 2 liquids only, as defined by the Pressure
US END CONNECTION: BS 1560, ANSI B16.1, ANSI B16.5 Equipment Directive 2014/68/EU.*
Vaild as of 081220
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or
omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.