Professional Documents
Culture Documents
E2E E62I-E-03
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Features
2-Wire Models
Pre-wired Models with Oil-resistant Reinforced PUR Cables Added
to the Lineup and Easy Differentiation with Orange Head
Cable
able Flexibility at
Oilil Resistance Cable
able Flexibility Low Temperatures
Differentiation from standard Oil Resistance (Insulation service life): Cable Flexibility: More Flexibility at −40°C
models: Orange Head twice or three times approximately twice
that of oil-resistant vinyl chloride that of vinyl chloride cables
Lineup includes models with Smartclick pre-wired connectors for fast connection.
XS5 Smartclick connectors used to
enable checking connector mating
Insert all
the way.
1/8 turn
Insulation: Oil-resistant grade PUR (polyurethane)
1
E2E
Lineup includes models with self-diagnostic output to provide notification of failures and
unstable detection conditions, such as coil burnout.
• Contributes to preventive maintenance to keep the line from stopping.
3-Wire Models
Wide range of ambient operating temperatures: −40°C to 85°C (M8 to M30 models)
• Suitable for low-temperature and high-temperature applications, which are troublesome for photoelectric sensors.
2
E2E
E2E Guide to Selection by Purpose
3
E2E
E2E Model Number Legend
E2E- A B C D E F G - H I - J - K - L M
No. Classification Code Meaning Remarks
A Appearance X Cylindrical (threaded)
Number Sensing distance (Unit: mm) Example:
B Sensing distance
R Indication of decimal point 1R5: 1.5 mm
Blank Shielded Model
C Shielding
M Unshielded Model
B DC 3-wire PNP open-collector output
C DC 3-wire NPN open-collector output
D DC 2-wire polarity/no polarity Whether D models have
Power supply and output
D E DC 3-wire NPN collector load built-in output polarity is defined by num-
specifications
F DC 3-wire PNP collector load built-in output ber J.
T AC/DC 2-wire
Y AC 2-wire
Form of output switching el- 1 Normally open (NO)
E
ement 2 Normally closed (NC)
Blank Standard frequency Used to prevent mutual in-
F Oscillation frequency type
5 Different frequency terference.
Blank No
G Self-diagnosis
5 Yes
Blank Pre-wired
4
E2E
Ordering Information
2-Wire Models
Shielded DC 2-wire Models with No Self-diagnostic Output [Refer to Dimensions on page 27.]
Opera- Applicable
Appear- Sensing distance Connection Cable Polar- tion Pin connector Model
ance method specifications ity arrangement
mode code *2
NO 1: +V, 4: 0 V E2E-X2D1-M1TGJ-U 0.3M
M12 Pre-wired Smart- PUR (increased H
click Connector Mod- oil-resistant) NC 1: +V, 2: 0 V E2E-X2D2-M1TGJ-U 0.3M
els (0.3m)
PVC (oil-resistant) NO 1: +V, 4: 0 V G E2E-X2D1-M1TGJ 0.3M
PUR (increased NO E2E-X2D1-U 2M
oil-resistant) NC E2E-X2D2-U 2M
Pre-wired Models
(2 m) --- ---
M8 2 mm Yes NO E2E-X2D1-N 2M
PVC (oil-resistant)
NC E2E-X2D2-N 2M
M12 Connector Mod- NO 1: +V, 4: 0 V A E2E-X2D1-M1G
---
els NC 1: +V, 2: 0 V D E2E-X2D2-M1G
NO 1: +V, 4: 0 V E2E-X2D1-M3G
M8 Connector Models --- I
NC 1: +V, 2: 0 V E2E-X2D2-M3G
NO 1: +V, 4: 0 V E2E-X3D1-M1TGJ-U 0.3M
M12 Pre-wired Smart- PUR (increased H
click Connector Mod- oil-resistant) NC 1: +V, 2: 0 V E2E-X3D2-M1TGJ-U 0.3M
els (0.3m)
PVC (oil-resistant) NO 1: +V, 4: 0 V G E2E-X3D1-M1TGJ 0.3M
PUR (increased NO E2E-X3D1-U 2M
oil-resistant) Yes NC E2E-X3D2-U 2M
Pre-wired Models
(2 m) --- ---
NO E2E-X3D1-N 2M *1
PVC (oil-resistant)
M12 3 mm NC E2E-X3D2-N 2M
M12 Connector Mod- NO 1: +V, 4: 0 V A E2E-X3D1-M1G *1
---
els NC 1: +V, 2: 0 V D E2E-X3D2-M1G
NO 1: +V, 4: 0 V A E2E-X3D1-M1GJ 0.3M
Yes
M12 Standard Pre- NC 1: +V, 2: 0 V D E2E-X3D2-M1GJ 0.3M
wired Connector Mod- PVC (oil-resistant)
els (0.3 m) NO (3, 4): (+V, 0 V) C E2E-X3D1-M1J-T 0.3M
No *3
NC (1, 2): (+V, 0 V) D ---
NO 1: +V, 4: 0 V E2E-X7D1-M1TGJ-U 0.3M
M12 Pre-wired Smart- PUR (increased H
click Connector Mod- oil-resistant) NC 1: +V, 2: 0 V E2E-X7D2-M1TGJ-U 0.3M
els (0.3m)
PVC (oil-resistant) NO 1: +V, 4: 0 V G E2E-X7D1-M1TGJ 0.3M
PUR (increased NO E2E-X7D1-U 2M
oil-resistant) Yes NC E2E-X7D2-U 2M
Pre-wired Models
(2 m) --- ---
NO E2E-X7D1-N 2M *1
PVC (oil-resistant)
M18 7 mm NC E2E-X7D2-N 2M
M12 Connector Mod- NO 1: +V, 4: 0 V A E2E-X7D1-M1G *1
els ---
NC 1: +V, 2: 0 V D E2E-X7D2-M1G
NO 1: +V, 4: 0 V A E2E-X7D1-M1GJ 0.3M
Yes
M12 Standard Pre- NC 1: +V, 2: 0 V D E2E-X7D2-M1GJ 0.3M
wired Connector Mod- PVC (oil-resistant)
els (0.3 m) NO (3, 4): (+V, 0 V) C E2E-X7D1-M1J-T 0.3M
No *3
NC (1, 2): (+V, 0 V) D E2E-X7D2-M1J-T 0.3M
NO 1: +V, 4: 0 V E2E-X10D1-M1TGJ-U 0.3M
M12 Pre-wired Smart- PUR (increased H
click Connector Mod- oil-resistant) NC 1: +V, 2: 0 V E2E-X10D2-M1TGJ-U 0.3M
els (0.3m)
PVC (oil-resistant) NO 1: +V, 4: 0 V G E2E-X10D1-M1TGJ 0.3M
PUR (increased NO E2E-X10D1-U 2M
oil-resistant) Yes NC E2E-X10D2-U 2M
Pre-wired Models
(2 m) --- ---
NO E2E-X10D1-N 2M *1
PVC (oil-resistant)
M30 10 mm NC E2E-X10D2-N 2M
M12 Connector Mod- NO 1: +V, 4: 0 V A E2E-X10D1-M1G *1
---
els NC 1: +V, 2: 0 V D E2E-X10D2-M1G
NO 1: +V, 4: 0 V A E2E-X10D1-M1GJ 0.3M
Yes
M12 Standard Pre- NC 1: +V, 2: 0 V D E2E-X10D2-M1GJ 0.3M
wired Connector Mod- PVC (oil-resistant)
els (0.3 m) NO (3, 4): (+V, 0 V) C E2E-X10D1-M1J-T 0.3M
No *3
NC (1, 2): (+V, 0 V) D E2E-X10D2-M1J-T 0.3M
*1. Models with different frequencies are also available. The model number is E2E-X @D15 (example: E2E-X3D15-N 2M).
*2. Refer to page 22 for details.
*3. The residual voltage for models without polarity is 5 V, so use caution concerning the connection load interface conditions (e.g., PLC ON voltage).
Refer to page 26
5
E2E
2-Wire Models
Shielded DC 2-Wire UL-recognized Models with No Self-diagnostic Output [Refer to Dimensions on page 27.]
Opera- Applicable
Appear- Connection Cable Polar- Pin
ance Sensing distance method specifications ity
tion
arrangement
connector Model
mode code *
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X2D1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X2D2-M1TGJ-US 0.3M
M8 2 mm
NO E2E-X2D1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X2D2-US 2M
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X3D1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X3D2-M1TGJ-US 0.3M
M12 3 mm
NO E2E-X3D1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X3D2-US 2M
PVC (oil-resistant) Yes
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X7D1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X7D2-M1TGJ-US 0.3M
M18 7 mm
NO E2E-X7D1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X7D2-US 2M
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X10D1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X10D2-M1TGJ-US 0.3M
M30 10 mm
NO E2E-X10D1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X10D2-US 2M
6
E2E
2-Wire Models
Unshielded DC 2-Wire Models with No Self-diagnosis Output [Refer to Dimensions on page 27.]
7
E2E
2-Wire Models
Unshielded DC 2-Wire UL-recognized Models with No Self-diagnostic Output [Refer to Dimensions on page 27.]
Opera- Applicable
Appear- Connection Cable Polar- Pin
ance Sensing distance method specifications ity
tion
arrangement
connector Model
mode code *
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X4MD1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X4MD2-M1TGJ-US 0.3M
M8 4 mm
NO E2E-X4MD1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X4MD2-US 2M
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X8MD1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X8MD2-M1TGJ-US 0.3M
M12 8 mm
NO E2E-X8MD1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X8MD2-US 2M
PVC (oil-resistant) Yes
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X14MD1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X14MD2-M1TGJ-US 0.3M
M18 14 mm
NO E2E-X14MD1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X14MD2-US 2M
M12 Pre-wired Smart- NO 1: +V, 4: 0 V E2E-X20MD1-M1TGJ-US 0.3M
click Connector Models G
(0.3 m) NC 1: +V, 2: 0 V E2E-X20MD2-M1TGJ-US 0.3M
M30 20 mm
NO E2E-X20MD1-US 2M
Pre-wired Models (2 m) --- ---
NC E2E-X20MD2-US 2M
Shielded DC 2-Wire Models with Self-diagnosis Output [Refer to Dimensions on page 27.]
Opera- Applicable
Appear- Sensing distance Connection Cable Polar- tion Pin connector Model
ance method specifications ity mode arrangement code *2
Pre-wired Models
PVC (oil-resistant) --- --- E2E-X3D1S 2M *1
(2 m)
M12 3 mm 2: +V and diagnostic output
M12 Connector --- 3: 0 V D E2E-X3D1S-M1
Models 4: +V and control output
Pre-wired Models PVC (oil-resistant) --- --- E2E-X7D1S 2M *1
(2 m)
M18 7 mm Yes NO 2: +V and diagnostic output
M12 Connector
--- 3: 0 V D E2E-X7D1S-M1
Models
4: +V and control output
Pre-wired Models
PVC (oil-resistant) --- --- E2E-X10D1S 2M *1
(2 m)
M30 10 mm 2: +V and diagnostic output
M12 Connector
--- 3: 0 V D E2E-X10D1S-M1
Models
4: +V and control output
*1. Models with different frequencies are also available. The model number is E2E-X @D15S (example: E2E-X3D15S 2M).
*2. Refer to page 22 for details.
8
E2E
2-Wire Models
Unshielded DC 2-Wire Models with Self-diagnosis Output [Refer to Dimensions on page 27.]
Opera- Applicable
Appear- Connection Cable Polar- Pin
ance Sensing distance method specifications ity
tion
arrangement
connector Model
mode code *2
Pre-wired Mod-
els (2 m) PVC (oil-resistant) --- --- E2E-X8MD1S 2M *1
M12 8 mm M12 Connector
2: +V and diagnostic output
--- 3: 0 V D E2E-X8MD1S-M1
Models
4: +V and control output
Pre-wired Mod-
PVC (oil-resistant) --- --- E2E-X14MD1S 2M *1
els (2 m)
M18 14 mm Yes NO 2: +V and diagnostic output
M12 Connector
Models --- 3: 0 V D E2E-X14MD1S-M1
4: +V and control output
Pre-wired Mod-
PVC (oil-resistant) --- --- E2E-X20MD1S 2M *1
els (2 m)
M30 20 mm 2: +V and diagnostic output
M12 Connector
Models --- 3: 0 V D E2E-X20MD1S-M1
4: +V and control output
*1. Models with different frequencies are also available. The model number is E2E-X @MD15S (example: E2E-X8MD15S 2M).
*2. Refer to page 22 for details.
9
E2E
2-Wire Models
*1. Models with different frequencies are also available. The model number is E2E-X @Y@5 (example: E2E-X5Y15 2M).
*2. Refer to page 22 for details.
Unshielded Models
*1. Models with different frequencies are also available. The model number is E2E-X @MY@5 (example: E2E-X5MY15 2M).
*2. Refer to page 22 for details.
10
E2E
3-Wire Models
Appli- Model
Appear- Connection Cable Opera- Pin
cable
Sensing distance specifica- tion connec-
ance method arrangement NPN output PNP output
tions mode tor code
*2
PVC (oil-re-
sistant) NO E2E-X1R5E1 2M E2E-X1R5F1 2M
Pre-wired Models --- ---
(2 m) PVC (oil-re-
sistant) NC E2E-X1R5E2 2M E2E-X1R5F2 2M
11
E2E
3-Wire Models
Appli- Model
Appear- Connection Cable Opera- Pin
cable
Sensing distance tion connec-
ance method specifications arrangement NPN output PNP output
mode tor code
*2
Pre-wired Models PVC (oil-resis- NO E2E-X2ME1 2M E2E-X2MF1 2M
--- ---
(2 m) tant) NC E2E-X2ME2 2M E2E-X2MF2 2M
1: +V, 3: 0 V,
NO 4: Control output B E2E-X2ME1-M1 E2E-X2MF1-M1
M12 Connector
---
M8 Models 1: +V, 3: 0 V,
2 mm NC
2: Control output
D E2E-X2ME2-M1 E2E-X2MF2-M1
1: +V, 3: 0 V,
NO E2E-X2ME1-M3 E2E-X2MF1-M3
M8 Connector 4: Control output
Models --- I
1: +V, 3: 0 V,
NC E2E-X2ME2-M3 E2E-X2MF2-M3
2: Control output
Pre-wired Models PVC (oil-resis- NO E2E-X5ME1 2M *1 E2E-X5MF1 2M
--- ---
(2 m) tant) NC E2E-X5ME2 2M E2E-X5MF2 2M
M12 5 mm 1: +V, 3: 0 V,
NO 4: Control output B E2E-X5ME1-M1 E2E-X5MF1-M1
M12 Connector
---
Models 1: +V, 3: 0 V,
NC D E2E-X5ME2-M1 E2E-X5MF2-M1
2: Control output
Pre-wired Models PVC (oil-resis- NO E2E-X10ME1 2M *1 E2E-X10MF1 2M
(2 m) tant) --- ---
NC E2E-X10ME2 2M E2E-X10MF2 2M
M18 10 mm 1: +V, 3: 0 V,
NO B E2E-X10ME1-M1 E2E-X10MF1-M1
M12 Connector 4: Control output
---
Models 1: +V, 3: 0 V,
NC D E2E-X10ME2-M1 E2E-X10MF2-M1
2: Control output
Pre-wired Models PVC (oil-resis- NO E2E-X18ME1 2M *1 E2E-X18MF1 2M
--- ---
(2 m) tant) NC E2E-X18ME2 2M E2E-X18MF2 2M
M30 18 mm NO 1: +V, 3: 0 V, B E2E-X18ME1-M1 E2E-X18MF1-M1
M12 Connector 4: Control output
---
Models 1: +V, 3: 0 V,
NC D E2E-X18ME2-M1 E2E-X18MF2-M1
2: Control output
*1. Models with different frequencies are also available. The model number is E2E-X@M@@5 (example: E2E-X5ME15 2M).
*2. Refer to page 22 for details.
12
E2E
Ratings and Specifications
E2E-X@D@ DC 2-Wire Models
Size M8 M12 M18 M30
Shielded Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded
Item Model E2E-X2D@ E2E-X4MD@ E2E-X3D@ E2E-X8MD@ E2E-X7D@ E2E-X14MD@ E2E-X10D@ E2E-X20MD@
Sensing distance 2 mm ±10% 4 mm ±10% 3 mm ±10% 8 mm ±10% 7 mm ±10% 14 mm ±10% 10 mm ±10% 20 mm ±10%
Set distance *1 0 to 1.6 mm 0 to 3.2 mm 0 to 2.4 mm 0 to 6.4 mm 0 to 5.6 mm 0 to 11.2 mm 0 to 8 mm 0 to 16 mm
Differential travel 15% max. of sensing distance 10% max. of sensing distance
Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 17 and 18.
Standard sensing Iron, Iron, Iron, Iron, Iron, Iron,
Iron, 30 × 30 × 1 mm
object 8 × 8 × 1 mm 20 × 20 × 1 mm 12 × 12 × 1 mm 30 × 30 × 1 mm 18 × 18 × 1 mm 54 × 54 × 1 mm
Response frequency
1.5 kHz 1 kHz 0.8 kHz 0.5 kHz 0.4 kHz 0.1 kHz
*2
Power supply voltage
Standard Models: 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC)
(operating voltage
US Models: 12 to 24 VDC, ripple (p-p): 10% max. (The operating voltage range is also the same.)
range)
Leakage current 0.8 mA max.
Load
3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S Models
current
Control
output Residual
voltage 3 V max. (Load current: 100 mA, Cable length: 2 m, M1J-T Models only: 5 V max.)
*3
D1 Models: Operation indicator (red) and setting indicator (green)
Indicators
D2 Models: Operation indicator (red)
Operation mode
D1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 20 for details.
(with sensing object
D2 Models: NC
approaching)
Diagnostic output
0.3 to 1 s
delay
Protection circuits Surge suppressor, Load short-circuit protection (for control and diagnostic output)
Ambient
Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation)
temperature range
Ambient
Operating/storage: 35% to 95% (with no condensation)
humidity range
±15% max. of sensing distance
Temperature
influence at 23°C in the temperature range ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
of −25 to 70°C
Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction: 500 m/s2
Shock resistance 10 times each in X, Y, and Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Z directions
Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant
Degree of protection
Connector Models: IEC 60529 IP67
Connection method Pre-wired Models (Standard cable length: 2 m), Connector Models, or Pre-wired Connector Models (Standard cable length: 0.3 m)
Pre-wired
Approx. 60 g Approx. 70 g Approx. 130 g Approx. 175 g
Models
Weight
Pre-wired
(pack-
ed Connector --- Approx. 40 g Approx. 70 g Approx. 110 g
state) Models
Connector
Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g
Models
Case Stainless steel (SUS303) Nickel-plated brass
Sensing sur-
PBT
face
Materi-
als Clamping
Nickel-plated brass
nuts
Toothed
Zinc-plated iron
washer
Accessories Instruction manual
*1. Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3. The residual voltage of each M1J-T Model is 5 V. When connecting to a device, make sure that the device can withstand the residual voltage. (Refer to page 26 for
details.)
13
E2E
14
E2E
15
E2E
Ambient humidity
range Operating/Storage: 35% to 95% (with no condensation)
Temperature ±15% max. of sensing distance at 23°C in the temperature range of −40 to 85°C
influence ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction: 500 m/s2
Shock resistance 10 times each in X, Y, and Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Z directions
Pre-wired Models : IEC 60529 IP67, in-house standards: oil-resistant
Degree of protection
Connector Models : IEC 60529 IP67
Connection method Pre-wired Models (Standard cable length: 2 m) and Connector Models
Pre-
wired Approx. 65 g Approx. 75 g Approx. 150 g Approx. 195 g
Weight Models
(packed
state) Connec-
tor Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g
Models
Case Stainless steel (SUS303) Nickel-plated brass
Sensing
PBT
surface
Materials Clamp-
Nickel-plated brass
ing nuts
Toothed
Zinc-plated iron
washer
Accessories Instruction manual
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and
a set distance of half the sensing distance.
*2. When using an M8 Model at an ambient temperature between 70 and 85°C, supply 10 to 30 VDC to the Sensor and make sure that the Sensor has a control output
of 100 mA maximum.
16
E2E
Engineering Data (Reference Value)
Sensing Area
Shielded Models
E2E-X@D@/-X@T1 E2E-X@E@/-X@Y@/-X@F@
Distance X (mm)
12 12
Distance X (mm)
E2E-X10 E2E-X10
10 10
Y
8 8 X
E2E-X7
6 6
E2E-X3 E2E-X5
E2E-X2 E2E-X2
4 Y 4
X
E2E
2 2 -X1R5
0 0
−20 −15 −10 −5 0 5 10 15 −15 −10 −5 0 5 10
Distance Y (mm) Distance Y (mm)
Unshielded Models
E2E-X@MD@ E2E-X@ME@/-X@MY@/-X@MF@
Distance X (mm)
Distance X (mm)
30 30
Y
25 25 X
20 20
E2E E2E-X18M
-X20M
15 15
E2E
-X14M
E2E-X10M
Y
10 10
X E2E E2E-X5M
-X8M
E2E-X2M
5 5
E2E
-X4M
0 0
−30 −20 −10 0 10 20 −30 −20 −10 0 10 20
Distance Y (mm) Distance Y (mm)
3.0 4.0 8
Distance X (mm)
d× d×
d× d
d
t = 1 mm d t = 1 mm
X 3.5 t = 1 mm 7 X Iron
2.5 X
3.0 Iron 6
2.0 Iron
2.5 5
Stainless Stainless
steel steel
1.5 Stainless 2.0 (SUS304) 4
(SUS304)
steel
(SUS304) Brass
1.5 Brass 3
1.0 Aluminum
Brass Aluminum
Copper
1.0 Copper 2
Aluminum
0.5 Copper
0.5 1
0 5 10 15 20 25 0 5 10 15 20 25 30 35 40 0 10 20 30 40 50
Side length of sensing object: d (mm) Side length of sensing object: d (mm) Side length of sensing object: d (mm)
Distance X (mm)
12 6 12
d× d× d×
d d d
t = 1 mm t = 1 mm t = 1 mm
X X X
10 Iron 5 10
8 4 Iron 8 Iron
Stainless
6 3 Stainless 6
steel Stainless
(SUS304) steel steel
Brass (SUS304) (SUS304)
4 Aluminum 2 4
Brass Brass
Copper Aluminum
Copper Aluminum
2 1 Copper
2
0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 0 10 15 20 30 40 50 60 70
Side length of sensing object: d (mm) Side length of sensing object: d (mm) Side length of sensing object: d (mm)
17
E2E
Distance X (mm)
Distance X (mm)
Distance X (mm)
25 25 2.5
d× d× d×
d d d
t = 1 mm t = 1 mm t = 1 mm
X X X
20 20 Iron 2.0
Iron
15 15 1.5
Iron Stainless
steel Stainless steel
(SUS304) (SUS304)
10 Stainless 10 1.0
Brass
steel Aluminum
(SUS304) Brass
Copper
Brass
5 Aluminum 5 0.5 Aluminum
Copper
0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 80 90 100 0 5 10 15 20 25
Side length of sensing object: d (mm) Side length of sensing object: d (mm) Side length of sensing object: d (mm)
Distance X (mm)
Distance X (mm)
7 12
Distance X (mm)
2.5
d× d× d×
d d d
t = 1 mm t = 1 mm t = 1 mm Iron
X Iron 6 X X
10
2.0
Iron
5
Stainless steel 8
(SUS304) Stainless steel (SUS304)
1.5 Stainless steel
4 (SUS304)
6
3
1.0 Brass
Brass 4
Brass 2
Aluminum
0.5 Aluminum
Aluminum 2
1
0 5 10 15 20 25 0 10 20 30 40 50 0 10 20 30 40 50 60
Side length of sensing object: d (mm) Side length of sensing object: d (mm) Side length of sensing object: d (mm)
12
Distance X (mm)
2.5 7
Distance X (mm)
d× d× d×
d d d
t = 1 mm t = 1 mm t = 1 mm Iron
X Iron 6 X 10 X
2.0
Iron
5
Stainless steel 8
(SUS304)
1.5 Stainless steel
4 (SUS304) Stainless steel (SUS304)
6
Brass 3
1.0
Aluminum Brass 4 Brass
2
Copper
Aluminum
0.5 Aluminum 2
1
0 5 10 15 20 25 30 0 10 20 30 40 50 0 10 20 30 40 50 60
Side length of sensing object: d (mm) Side length of sensing object: d (mm) Side length of sensing object: d (mm)
E2E-X18ME@/-X18MY@/-X18MF@
Distance X (mm)
25
d×
d
t = 1 mm
X
20
Iron
15
Stainless steel (SUS304)
10
Brass
5 Aluminum
0 20 40 60 80 100
Side length of sensing object: d (mm)
18
E2E
Leakage Current
E2E-X@D@ E2E-X@Y@ E2E-X@T1
1.4
1.0 1.0
E2E-X10D1-N
0.6
E2E-X3D1-N 0.8 0.8
DC power
0.6 0.6
0.4 Protective
E2E-X2D1-N resistance
0.4 mA 0.4
E2E-X7D1-N ~
0.2 V AC
0.2 ~ power 0.2
Proximity
Sensor (OFF)
0 5 10 15 20 25 30 0 50 100 150 200 250 300 0 50 100 150 200 250 300
Power supply voltage (V) Power supply voltage (V) Power supply voltage (V)
200 VAC
4 5 100 VAC
E2E-X@D1-M1J-T
24 VDC
3 4
E2E-X@D@
2 3
1 2
0
1 3 5 10 30 50 100 1 3 5 10 30 50 100
Load current (mA) Load current (mA)
30 120 240
Load voltage VL (V)
20 80 160
Residual output voltage
V V
~
ON ~
15 60 120
VL VL
V
~ 200 VAC
100 VAC
A A
~
10 40
~ 80
VL
24 VAC
A
~
5 20 40
Residual load Residual load Residual
voltage voltage load voltage
OFF OFF OFF
0 0 0
1 3 5 10 30 50 100 300 500 1 3 5 10 30 50 100 300 500 1 3 5 10 30 50 100 300 500
Load current (mA) Load current (mA) Load current (mA)
19
E2E
I/O Circuit Diagrams
E2E-X@D@ DC 2-Wire Models
Operation
Model Timing Chart Output circuit
mode
Polarity: Yes
1
Load
E2E-X@D1-N Brown +V
Prox-
E2E-X@D1-M1G(J) imity
E2E-X@D1(-M1TGJ)-U Sensor
Unstable Set position main
Non-sensing sensing
E2E-X@D1-M3G area Stable sensing area circuit
4
area
E2E-X@D1(-M1TGJ)-US Proximity Sensor
Blue 0V
Sensing
object Note: The load can be connected to either the
Without +V or 0 V side.
self- (%) 100 80 0
diagnostic Rated
sensing Polarity: None
output: distance ON
Setting indicator
NO OFF (green) 4
Load
ON +V
Operation Prox-
OFF indicator (red) (0 V)
imity
ON Sensor
Control output main
E2E-X@D1-M1J-T OFF circuit
3
0V
(+V)
Note 1. The load can be connected to either the +V or
0 V side.
2. The E2E-X@D1-M1J-T has no polarity.
Therefore, terminals 3 and 4 have no polarity.
Non-sensing
area Sensing area
Proximity Sensor
1
Sensing Load
object Brown +V
Without E2E-X@D2-N Prox-
imity
self- E2E-X@D2-M1G (%) 100 0 Sensor
main
diagnostic E2E-X@D2(-M1TGJ)-U circuit
output: E2E-X@D2-M3G Rated 2
sensing
NC E2E-X@D2(-M1TGJ)-US distance Blue 0V
ON
Operation Note: The load can be connected to either the +V
OFF
indicator (red) or 0 V side.
ON
Control output
OFF
Sensing
object Brown (4)
Load
(%) 100 80 0 +V
Rated Load
Prox- +V
With self- sensing ON imity Orange (2)
distance Sensor (diagnostic
diagnostic E2E-X@D1S OFF Setting indicator main
output)
(green) circuit
output: E2E-X@D1S-M1 ON
NO OFF Operation Blue (3)
indicator (red)
ON
0
OFF Control output
ON
Note: Connect both the loads to the +V side of
the control output and diagnostic output.
OFF Diagnostic output*
20
E2E
DC 3-Wire Models
Output
Operation
specifica- Model Timing Chart Output circuit
mode
tions
Sensing Present
object Not present
1
Operation ON +V
indicator (red) 100 Ω Brown
OFF
NO Control output
ON Load
(between brown Proximity Constant
and black leads) OFF Sensor current* 4 2
Output voltage High main
Black
(between black circuit
E2E-X@E@ and blue leads)
Low Tr
Present
Sensing object 1
Not present Brown
Operation indicator +V
(red) ON
OFF
NO Control output
(Between blue and ON Proximity * Tr
4 2
black leads) Sensor
OFF
Output voltage main
Black
(between brown High circuit
E2E-X@F@
and black leads) Low Load
PNP output E2E-X@F@-M1 3
Present 100 Ω
E2E-X@F@-M3 Sensing object Blue
0V
Not present
Operation indicator
(red) ON *When a transistor is connected
OFF
NC Control output Note: For Connector Models, the
(Between blue and ON connection between pins 1, 4 and 3
black leads) uses an NO contact, and the
OFF
Output voltage connection between pins 1, 2 and 3
(between brown High
uses an NC contact.
and black leads) Low
AC 2-Wire Models
Operation
Model Timing Chart Output circuit
mode
21
E2E
Sensor I/O Connectors (Sockets on One Cable End)
Model for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.
[Refer to Dimensions for the XS2, XS3, and XS5.]
Connector
Applicable Applicable Proximity Connection
Cable length 2m Cable length 5m
connector Sensor model diagram
code Screw Appearance *1 CablConnector CablConnector number No. *2
model number model number
Straight XS2F-D421-DA0-F XS2F-D421-GA0-F
A E2E-X@D1-M1G(J) 1
L-shape XS2F-D422-DA0-F XS2F-D422-GA0-F
Straight XS2F-D421-DC0-F XS2F-D421-GC0-F E2E-X@E1-M1
B 10
L-shape XS2F-D422-DC0-F XS2F-D422-GC0-F E2E-X@F1-M1
E2E-X@D1-M1J-T 3
Straight XS2F-D421-DD0 XS2F-D421-GD0
E2E-X@D1-M1 2
C
E2E-X@D1-M1J-T 3
L-shape XS2F-D422-DD0 XS2F-D422-GD0
E2E-X@D1-M1 2
E2E-X@D2-M1G(J) 6
E2E-X@D2-M1J-T 8
E2E-X@D2-M1 7
Straight XS2F-D421-D80-F XS2F-D421-G80-F
E2E-X@D1S-M1 5
E2E-X@E2-M1
11
E2E-X@F2-M1
D
M12 E2E-X@D2-M1G(J) 6
E2E-X@D2-M1J-T 8
E2E-X@D2-M1 7
L-shape XS2F-D422-D80-F XS2F-D422-G80-F
E2E-X@D1S-M1 5
E2E-X@E2-M1
11
E2E-X@F2-M1
Straight XS2F-A421-DB0-F XS2F-A421-GB0-F
E E2E-X@Y1-M1 14
L-shape XS2F-A422-DB0-F XS2F-A422-GB0-F
F Straight XS2F-A421-D90-F XS2F-A421-G90-F E2E-X@Y2-M1 15
Smartclick Connector, E2E-X@D1-M1TGJ(-US) 16
G XS5F-D421-D80-F XS5F-D421-G80-F
Straight E2E-X@D2-M1TGJ-US 17
E2E-X@D1-M3G 4
E2E-X@D2-M3G 9
Straight XS3F-M421-402-A XS3F-M421-405-A E2E-X@E1-M3
12
E2E-X@F1-M3
E2E-X@E2-M3
13
E2E-X@F2-M3
I M8
E2E-X@D1-M3G 4
E2E-X@D2-M3G 9
L-shape XS3F-M422-402-A XS3F-M422-405-A E2E-X@E1-M3
12
E2E-X@F1-M3
E2E-X@E2-M3
13
E2E-X@F2-M3
Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details and for information on Cable length and Robotics Cables.
*1. Images of straight and L-shaped connectors.
*2. Refer to Connection Diagrams on page 23 for information on Proximity Sensor and I/O Connector connections.
22
E2E
Connections for Sensor I/O Connectors
Proximity Sensor
Connection Sensor I/O Connector
Operation Connections
diagram No. Type Model model number
mode
1: Straight E2E XS2F
2: L-shape
DC 2-wire 1 1 Brown (+)
1 E2E-X@D1-M1G/M1GJ XS2F-D42@-@A0-F
circuit
2 2
Main
(IEC pin wiring)
3 3
D: 2-m cable 4 4 Blue (−)
G: 5-m cable
circuit
Main
2 2
wiring) 3 3 Blue (−)
D: 2-m cable 4 4 Brown (+)
G: 5-m cable
circuit
Main
2 2
(no polarity) 3 3 Blue (+) (−)
D: 2-m cable 4 4 Brown (−) (+)
G: 5-m cable
circuit
XS3F-M42@-40@-A
Main
2 2 White (not connected)
(M8 connector) 3 3 Blue (not connected)
2: 2-m cable 4 4 Black (−)
5: 5-m cable
circuit
White (diagnostic output) (+)
Main
2 2
type) 3 3 Blue (0 V)
D: 2-m cable 4 4 Black (control output) (+)
G: 5-m cable
2 2
(IEC pin wiring) White (−)
3 3 Blue (not connected)
D: 2-m cable 4 4 Black (not connected)
G: 5-m cable
1: Straight E2E XS2F *
2: L-shape
DC 2-wire 1 1 Brown (not connected)
7 (previous pin E2E-X@D2-M1 XS2F-D42@-@80-F
circuit
2 2
Main
White (+)
wiring) 3 3 Blue (−)
D: 2-m cable 4 4 Black (not connected)
G: 5-m cable
NC
1: Straight E2E XS2F *
2: L-shape
DC 2-wire 1 1 Brown (+)(−)
8 E2E-X@D2-M1J-T XS2F-D42@-@80-F
circuit
Main
2 2
(no polarity) White (−)(+)
3 3 Blue (not connected)
D: 2-m cable 4 4 Black (not connected)
G: 5-m cable
2 2
Main
23
E2E
Proximity Sensor
Connection Sensor I/O Connector
Operation Connections
diagram No. Type Model model number
mode
1: Straight E2E XS2F
2: L-shape
1 1 Brown (+V)
circuit
10 NO E2E-X@E/F1-M1 XS2F-D42@-@C0-F
Main
2 2
3 3 Blue (0 V)
D: 2-m cable 4 4 Black (output)
G: 5-m cable
DC 3-wire
1: Straight E2E XS3F
2: L-shape
1 1 Brown (+V)
11 NC E2E-X@E2/F2-M1 XS2F-D42@-@80-F
circuit
Main
2 2 White (not connected)
3 3 Blue (0 V)
D: 2-m cable 4 4 Black (output)
G: 5-m cable
circuit
Main
2 2 White (not connected)
3 3 Blue (0 V)
2: 2-m cable 4 4 Black (output)
DC 3-wire 5: 5-m cable
(M8 connector) 1: Straight E2E XS3F
2: L-shape
1 1 Brown (+V)
13 NC E2E-X@E2/F2-M3 XS3F-M42@-40@-A
circuit
Main
2 2 White (output)
3 3 Blue (0 V)
2: 2-m cable 4 4 Black (not connected)
5: 5-m cable
circuit
2 2
Main
3 3 Brown
D: 2-m cable 4 4 Blue
G: 5-m cable
AC 2-wire
E2E XS2F *
XS2F-A421-@90-F 1 1 Brown
15 NC E2E-X@Y2-M1
circuit
Main
2 2 White
D: 2-m cable 3 3 Blue (not connected)
G: 5-m cable 4 4 Black (not connected)
E2E XS5F
XS5F-D421-@80-F
E2E-X@D1- 1 1 Brown (+)
16 NO
circuit
Main
E2E XS5F
XS5F-D421-@80-F
E2E-X@D2- 1 1 Brown (+)
17 NC
circuit
Main
2 2 White (−)
M1TGJ-US D: 2-m cable 3 3 Blue (not connected)
G: 5-m cable 4 4 Black (not connected)
DC 2-wire
(Smartclick
connector) E2E XS5F
XS5F-D421-@80-P
E2E-X@D1- 1 1 Brown (+)
18 NO
circuit
Main
E2E XS5F
XS5F-D421-@80-P
E2E-X@D2- 1 1 Brown (+)
19 NC
circuit
Main
2 2 White (−)
M1TGJ-U D: 2-m cable 3 3 Blue (not connected)
G: 5-m cable 4 4 Black (not connected)
24
E2E
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
CAUTION
• Do not short the load. Explosion or burning may
result.
• Do not supply power to the Sensor with no load,
otherwise Sensor may be damaged.
25
E2E
● Mounting
Tightening Force
Do not tighten the nut with excessive force.
A washer must be used with the nut.
Note: 1. The allowable tightening strength depends on the distance from the edge
of the head, as shown in the following table. (A is the distance from the
edge of the head. B includes the nut on the head side. If the edge of the
nut is in part A, the tightening torque for part A applies instead.)
2. The following strengths assume washers are being used.
Part A Part B
Model
Dimension Torque Torque
Shielded 9
M8 9 N·m 12 N·m
Unshielded 3
M12 30 N·m
M18 70 N·m
M30 180 N·m
26
E2E
(Unit: mm)
Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Main Units
Model Number-Dimensions Drawing Number Lookup Table
Model DC 2-Wire Models DC 3-Wire Models AC 2-Wire Models AC/DC 2-Wire Models
Model Shielded Model No. Model No. Model No. Model No.
M8 E2E-X2D@(-US) 1 E2E-X1R5E@/F@ 1 E2E-X1R5Y@ 3 ---
M12 E2E-X3D@(-US) 5 E2E-X2E@/F@ 5 E2E-X2Y@ 7 E2E-X3T1 9
Shielded
M18 E2E-X7D@(-US) 10 E2E-X5E@/F@ 10 E2E-X5Y@ 10 E2E-X7T1 10
M30 E2E-X10D@(-US) 12 E2E-X10E@/F@ 12 E2E-X10Y@ 12 E2E-X10T1 12
Pre-wired Models
M8 E2E-X4MD@(-US) 2 E2E-X2ME@/F@ 2 E2E-X2MY@ 4
M12 E2E-X8MD@(-US) 6 E2E-X5ME@/F@ 6 E2E-X5MY@ 8
Unshielded ---
M18 E2E-X14MD@(-US) 11 E2E-X10ME@/F@ 11 E2E-X10MY@ 11
M30 E2E-X20MD@(-US) 13 E2E-X18ME@/F@ 13 E2E-X18MY@ 13
M8 E2E-X2D@-M1(G) 14 E2E-X1R5E/F@-M1 14 ---
M12 E2E-X3D@-M1(G) 16 E2E-X2E/F@-M1 16 E2E-X2Y@-M1 18
Shielded ---
M18 E2E-X7D@-M1(G) 20 E2E-X5E/F@-M1 20 E2E-X5Y@-M1 20
Connector M30 E2E-X10D@-M1(G) 22 E2E-X10E/F@-M1 22 E2E-X10Y@-M1 22
Models
(M12) M8 E2E-X4MD@-M1(G) 15 E2E-X2ME/F@-M1 15 ---
M12 E2E-X8MD@-M1(G) 17 E2E-X5ME/F@-M1 17 E2E-X5MY@-M1 19
Unshielded ---
M18 E2E-X14MD@-M1(G) 21 E2E-X10ME/F@-M1 21 E2E-X10MY@-M1 21
M30 E2E-X20MD@-M1(G) 23 E2E-X18ME/F@-M1 23 E2E-X18MY@-M1 23
Connector Shielded E2E-X2D@-M3G 24 E2E-X1R5E/F@-M3 24
Models M8 --- ---
(M8) Unshielded E2E-X4MD@-M3G 25 E2E-X2ME/F@-M3 25
E2E-X2D@-M1(T)GJ(-U)
M8 26
E2E-X2D@-M1TGJ-US
E2E-X3D@-M1(T)GJ(-U)
M12 27
E2E-X3D@-M1TGJ-US
Shielded --- --- ---
E2E-X7D@-M1(T)GJ(-U)
M18 28
E2E-X7D@-M1TGJ-US
Pre-wired E2E-X10D@-M1(T)GJ(-U)
M30 29
Connector E2E-X10D@-M1TGJ-US
Models M8 E2E-X4MD@-M1TGJ-US 30
E2E-X8MD1-M1(T)GJ
M12 31
E2E-X8MD@-M1TGJ-US
Unshielded E2E-X14MD1-M1(T)GJ --- --- ---
M18 32
E2E-X14MD@-M1TGJ-US
E2E-X20MD1-M1(T)GJ
M30 33
E2E-X20MD@-M1TGJ-US
Pre-wired M12 E2E-X3D1-M1J-T 27
Connector
Shielded M18 E2E-X7D@-M1J-T 28 --- --- ---
Models
(no polarity) M30 E2E-X10D@-M1J-T 29
Note 1. Two clamping nuts and one toothed washer are provided with M8 to M30 Models.
2. The model numbers of M8 to M30 Pre-wired Models are laser-marked on the milled section and cable section. This does not apply, however, to models that
end in -U.
27
E2E
6.1 dia.
*1
Indicators *2 *1
M8 × 1 Two clamping nuts M8 × 1
Indicators *2
Two clamping nuts
Toothed washer
Toothed washer
*1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m *1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m
1.3 mm), Standard length: 2 m 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
Robotics Cable Models: 1.3 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: Robotics Cable Models:
1.27 mm), Standard length: 2 m 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: 1.27 mm), Standard length: 2 m
1.27 mm), Standard length: 2 m 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
Models with Highly Oil-resistant Cables: 1.27 mm), Standard length: 2 m
4-dia. polyurethane-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator The cable can be extended up to 200 m (separate metal conduit).
diameter: 1.3 mm), Standard length: 2 m *2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
The cable can be extended up to 200 m (separate metal conduit).
*2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
6.1 dia.
* *
Operation indicator (red) Operation indicator (red)
M8 × 1 M8 × 1
Two clamping nuts Two clamping nuts
Toothed 4-dia. vinyl-insulated round cable with 2 conductors Toothed 4-dia. vinyl-insulated round cable with 2 conductors
washer (Conductor cross section: 0.3 mm2, Insulator washer (Conductor cross section: 0.3 mm2, Insulator diameter:
diameter: 1.3 mm), Standard length: 2 m 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate The cable can be extended up to 200 m (separate
metal conduit). metal conduit).
9 dia.
*1
Indicators * 2 *1
M12 × 1 Indicators *2
Two clamping nuts M12 × 1 Two clamping nuts
Toothed washer
Toothed washer
*1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
1.3 mm), Standard length: 2 m *1. 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m
1.3 mm), Standard length: 2 m 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
Robotics Cable Models: 1.3 mm), Standard length: 2 m
4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: Robotics Cable Models:
1.27 mm), Standard length: 2 m 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: 1.27 mm), Standard length: 2 m
1.27 mm), Standard length: 2 m 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.3 mm2, Insulator diameter:
Models with Highly Oil-resistant Cables: 1.27 mm), Standard length: 2 m
4-dia. polyurethane-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator The cable can be extended (separate metal conduit) up to 200 m for the control output and up to 100 m for
diameter: 1.3 mm), Standard length: 2 m the diagnostic output.
The cable can be extended (separate metal conduit) up to 200 m for the control output and up to 100 m for *2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
the diagnostic output.
*2. D1 Models: Operation indicator (red) and setting indicator (green), D2/E/F Models: Operation indicator (red)
9 dia.
* *
Operation indicator (red)
M12 × 1 M12 × 1 Operation indicator (red)
Two clamping nuts Two clamping nuts
Toothed 4-dia. vinyl-insulated round cable with 2 Toothed 4-dia. vinyl-insulated round cable with 2
washer conductors (Conductor cross section: 0.3 mm2, washer conductors (Conductor cross section: 0.3 mm2,
Insulator diameter: 1.3 mm), Standard length: 2 m Insulator diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate The cable can be extended up to 200 m
metal conduit). (separate metal conduit).
Dimension M8 M12
F (mm) 8.5 +0.5
0 dia. 12.5 +0.5
0 dia.
28
E2E
Diagram 9 E2E-X3T1
60 9
21 dia.
55
17 4 10
*1 ---
Indicators *2
M12 × 1
Two clamping nuts
Toothed *1 4-dia. vinyl-insulated round cable with 2
washer conductors (Conductor cross section: 0.3 mm2,
Insulator diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m (separate
metal conduit).
*2 Operation indicator (red), Setting indicator (green)
14.8 dia.
*1 *1 *1
Indicators *2 Indicators *2
M18 × 1 M18 × 1
Two clamping nuts Two clamping nuts
Toothed washer Toothed washer
*1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, *1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m Insulator diameter: 1.9 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m Insulator diameter: 1.9 mm), Standard length: 2 m
Robotics Cable Models: Robotics Cable Models:
6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm), Standard length: 2 m Insulator diameter: 1.74 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm), Standard length: 2 m Insulator diameter: 1.74 mm), Standard length: 2 m
Models with Highly Oil-resistant Cables: The cable can be extended (separate metal conduit) up to 200 m for the control output
6-dia. polyurethane-insulated round cable with 2 conductors (Conductor cross section: and up to 100 m for the diagnostic output.
0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m *2. D1/T Models: Operation indicator (red), Setting indicator (green)
The cable can be extended (separate metal conduit) up to 200 m for the control output D2/E/F/Y Models: Operation indicator (red)
and up to 100 m for the diagnostic output.
*2. D1/T Models: Operation indicator (red), Setting indicator (green)
D2/E/F/Y Models: Operation indicator (red)
*1 26.8 dia.
Indicators *2 *1
Indicators *2
M30 × 1.5
Two clamping nuts M30 × 1.5
Toothed washer Two clamping nuts
*1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Toothed washer
*1. 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm), Standard length: 2 m
Insulator diameter: 1.9 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
Robotics Cable Models:
Robotics Cable Models:
6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross
6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m
Models with Highly Oil-resistant:
The cable can be extended (separate metal conduit) up to 200 m for the
6-dia. polyurethane-insulated round cable with 2 conductors (Conductor
control output and up to 100 m for the diagnostic output.
cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
*2. D1/T Models: Operation indicator (red), Setting indicator (green)
The cable can be extended (separate metal conduit) up to 200 m for the
D2/E/F/Y Models: Operation indicator (red)
control output and up to 100 m for the diagnostic output.
*2. D1/T Models: Operation indicator (red), Setting indicator (green)
D2/E/F/Y Models: Operation indicator (red)
29
E2E
6.1 dia.
M8 × 1 Indicators* Indicators*
Two clamping nuts M8 × 1
Two clamping nuts
Toothed washer
Toothed washer
* D1 Models: Operation indicator (red),
* D1 Models: Operation indicator (red),
Setting indicator (green)
Setting indicator (green)
D2/E/F Models: Operation indicator (red)
D2/E/F Models: Operation indicator (red)
9 dia.
Indicators *
M12 × 1 Indicators*
Two clamping nuts M12 × 1
Two clamping nuts
Toothed washer Toothed washer
* D1 Models: Operation indicator (red), * D1 Models: Operation indicator (red), Setting indicator (green)
Setting indicator (green) D2/E/F Models: Operation indicator (red)
D2/E/F Models: Operation indicator (red)
9 dia.
30
E2E
14.8 dia.
Indicators*
M18 × 1
Two clamping nuts Indicators*
Toothed washer M18 × 1
Two clamping nuts
* D1 Models: Operation indicator (red), Setting indicator (green) Toothed washer
D2/E/Y Models: Operation indicator (red) * D1 Models: Operation indicator (red), Setting indicator (green)
D2/E/Y Models: Operation indicator (red)
26.8 dia.
M12 × 1
Indicators* M12 × 1
M30 × 1.5 Indicators*
Two clamping nuts M30 × 1.5
Two clamping nuts
Toothed washer
Toothed washer
* D1 Models: Operation indicator (red), Setting indicator (green)
D2/E/Y Models: Operation indicator (red) * D1 Models: Operation indicator (red), Setting indicator (green)
D2/E/Y Models: Operation indicator (red)
31
E2E
Diagram 26 E2E-X2D@-M1TGJ-U *3 30 7
15 dia.
E2E-X2D1-M1TGJ 26
8
E2E-X2D@-M1TGJ-US 13
3
*1
Indicators *2
M8 × 1 M12 × 1
Two clamping nuts
*1. No U suffix: 4-dia. Vinyl-insulated round cable
Toothed washer
U suffix: 4-dia. Polyurethane insulated round cable,
Standard length: 300 mm
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
Diagram 27 E2E-X3D@-M1GJ 38 9
21 dia.
E2E-X3D1-M1J-T 33
4 10
E2E-X3D@-M1TGJ-U *3 17
E2E-X3D1-M1TGJ
E2E-X3D@-M1TGJ-US
*1
M12 × 1
Indicators *2 M12 × 1
Two clamping nuts *1. No U suffix: 4-dia. Vinyl-insulated round cable
Toothed washer U suffix: 4-dia. Polyurethane insulated round cable,
Standard length: 300 mm
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
43 12
Diagram 28 E2E-X7D@-M1GJ 29 dia.
38
E2E-X7D@-M1J-T 24 4 10
E2E-X7D@-M1TGJ-U *3
E2E-X7D1-M1TGJ
E2E-X7D@-M1TGJ-US
*1
Indicators *2 M12 × 1
M18 × 1
Two clamping nuts *1. No U suffix: 6-dia. Vinyl-insulated round cable
U suffix: 6-dia. Polyurethane insulated round cable,
Toothed washer Standard length: 300 mm
*2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
Diagram 29 E2E-X10D@-M1GJ 48 12
42 dia.
E2E-X10D@-M1J-T 43
36
E2E-X10D@-M1TGJ-U *3 5 10
E2E-X10D1-M1TGJ
E2E-X10D@-M1TGJ-US
*1
M12 × 1
Indicators *2
*1. No U suffix: 6-dia. Vinyl-insulated round cable
M30 × 1.5
Two clamping nuts U suffix: 6-dia. Polyurethane insulated round cable,
Standard length: 300 mm
Toothed washer *2. D1 Models: Operation indicator (red), Setting indicator (green)
D2 Models: Operation indicator (red)
*3. The connectors for M1TGJ models are XS5 Smartclick connectors.
32
E2E
Diagram 30 E2E-X4MD@-M1TGJ-US 30 7
15 dia.
26
13 6 3 8
6.1 dia.
*1
Indicators *2
M8 × 1 M12×1
Two clamping nuts
Toothed washer *1. 4-dia. vinyl-insulated round cable
Standard length: 300 mm
*2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
Diagram 31 E2E-X8MD1-M1GJ 38 9
21 dia. 33
E2E-X8MD1-M1TGJ
17 7 4 10
E2E-X8MD@-M1TGJ-US
9 dia.
*1
Indicators *2 M12 × 1
M12 × 1 Two clamping nuts *1. 4-dia. vinyl-insulated round cable,
Toothed washer Standard length: 300 mm
*2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
Diagram 32 E2E-X14MD@-M1GJ 43 12
38
E2E-X14MD1-M1TGJ 29 dia. 4 10
E2E-X14MD@-M1TGJ-US 10
24
14.8 dia.
*1
Indicators*2 M12 × 1
M18 × 1 *1. 6-dia. vinyl-insulated round cable, Standard
Two clamping nuts length: 300 mm
Toothed washer *2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
26.8 dia.
*1
M12 × 1
Indicators*2
M30 × 1.5 *1. 6-dia. vinyl-insulated round cable,
Two clamping nuts Standard length: 300 mm
Toothed washer *2. D1 Models: Operation indicator (red),
Setting indicator (green)
D2 Models: Operation indicator (red)
33
E2E
Mounting Brackets
Protective Covers
Sputter Protective Covers
Refer to Y92@ for details.
34
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
part of all quotes, agreements, purchase orders, acknowledgments, price lists, BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
catalogs, manuals, brochures and other documents, whether electronic or in PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
writing, relating to the sale of products or services (collectively, the "Products") INTENDED USE. Omron further disclaims all warranties and responsibility of
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron any type for claims or expenses based on infringement by the Products or oth-
objects to any terms or conditions proposed in Buyer’s purchase order or other erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
documents which are inconsistent with, or in addition to, these Terms. gation hereunder shall be, at Omron’s election, to (i) replace (in the form
2. Prices; Payment Terms. All prices stated are current, subject to change with- originally shipped with Buyer responsible for labor charges for removal or
out notice by Omron. Omron reserves the right to increase or decrease prices replacement thereof) the non-complying Product, (ii) repair the non-complying
on any unshipped portions of outstanding orders. Payments for Products are Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
due net 30 days unless otherwise stated in the invoice. the non-complying Product; provided that in no event shall Omron be responsi-
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices ble for warranty, repair, indemnity or any other claims or expenses regarding
sent to Buyer after deducting transportation charges, taxes and duties, and will the Products unless Omron’s analysis confirms that the Products were prop-
be allowed only if (i) the invoice is paid according to Omron’s payment terms erly handled, stored, installed and maintained and not subject to contamina-
and (ii) Buyer has no past due amounts. tion, abuse, misuse or inappropriate modification. Return of any Products by
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or Buyer must be approved in writing by Omron before shipment. Omron Compa-
the maximum legal rate, whichever is less, on any balance not paid within the nies shall not be liable for the suitability or unsuitability or the results from the
stated terms. use of Products in combination with any electrical or electronic components,
5. Orders. Omron will accept no order less than $200 net billing. circuits, system assemblies or any other materials or substances or environ-
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all ments. Any advice, recommendations or information given orally or in writing,
costs involved in, obtaining any government approvals required for the impor- are not to be construed as an amendment or addition to the above warranty.
tation or sale of the Products. See http://www.omron247.com or contact your Omron representative for pub-
7. Taxes. All taxes, duties and other governmental charges (other than general lished information.
real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
imposed directly or indirectly on Omron or required to be collected directly or FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
indirectly by Omron for the manufacture, production, sale, delivery, importa- LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
tion, consumption or use of the Products sold hereunder (including customs WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
duties and sales, excise, use, turnover and license taxes) shall be charged to BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
and remitted by Buyer to Omron. Further, in no event shall liability of Omron Companies exceed the individual
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory price of the Product on which liability is asserted.
to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
security or payment in advance. If Buyer fails to make payment or otherwise their employees from and against all liabilities, losses, claims, costs and
comply with these Terms or any related agreement, Omron may (without liabil- expenses (including attorney's fees and expenses) related to any claim, inves-
ity and in addition to other remedies) cancel any unshipped portion of Prod- tigation, litigation or proceeding (whether or not Omron is a party) which arises
ucts sold hereunder and stop any Products in transit until Buyer pays all or is alleged to arise from Buyer's acts or omissions under these Terms or in
amounts, including amounts payable hereunder, whether or not then due, any way with respect to the Products. Without limiting the foregoing, Buyer (at
which are owing to it by Buyer. Buyer shall in any event remain liable for all its own expense) shall indemnify and hold harmless Omron and defend or set-
unpaid accounts. tle any action brought against such Companies to the extent based on a claim
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation that any Product made to Buyer specifications infringed intellectual property
unless Buyer indemnifies Omron against all related costs or expenses. rights of another party.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery 16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
resulting from causes beyond its control, including earthquakes, fires, floods, sive property of Omron Companies and Buyer shall not attempt to duplicate it
strikes or other labor disputes, shortage of labor or materials, accidents to in any way without the written permission of Omron. Notwithstanding any
machinery, acts of sabotage, riots, delay in or lack of transportation or the charges to Buyer for engineering or tooling, all engineering and tooling shall
requirements of any government authority. remain the exclusive property of Omron. All information and materials supplied
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: by Omron to Buyer relating to the Products are confidential and proprietary,
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship and Buyer shall limit distribution thereof to its trusted employees and strictly
except in “break down” situations. prevent disclosure to any third party.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and
constitute delivery to Buyer; licenses regarding (i) export of products or information; (iii) sale of products to
c. All sales and shipments of Products shall be FOB shipping point (unless oth- “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
erwise stated in writing by Omron), at which point title and risk of loss shall regulated technology or information.
pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
est in the Products until the full purchase price is paid; and no course of dealing between Buyer and Omron shall operate as a waiver
d. Delivery and shipping dates are estimates only; and of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
e. Omron will package Products as it deems proper for protection against nor- without Omron's written consent. (c) Law. These Terms are governed by the
mal handling and extra charges apply to special conditions. law of the jurisdiction of the home office of the Omron company from which
12. Claims. Any claim by Buyer against Omron for shortage or damage to the Buyer is purchasing the Products (without regard to conflict of law princi-
Products occurring before delivery to the carrier must be presented in writing ples). (d) Amendment. These Terms constitute the entire agreement between
to Omron within 30 days of receipt of shipment and include the original trans- Buyer and Omron relating to the Products, and no provision may be changed
portation bill signed by the carrier noting that the carrier received the Products or waived unless in writing signed by the parties. (e) Severability. If any provi-
from Omron in the condition claimed. sion hereof is rendered ineffective or invalid, such provision shall not invalidate
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
Products will be free from defects in materials and workmanship for a period of against the amount owing in respect of this invoice. (g) Definitions. As used
twelve months from the date of sale by Omron (or such other period expressed herein, “including” means “including without limitation”; and “Omron Compa-
in writing by Omron). Omron disclaims all other warranties, express or implied. nies” (or similar words) mean Omron Corporation and any direct or indirect
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, subsidiary or affiliate thereof.
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
OMRON ELECTRONICS DE MEXICO • SALES OFFICE OTHER OMRON LATIN AMERICA SALES
Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com 54.11.4783.5300
OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu
E62I-E-03 07/15 Note: Specifications are subject to change. © 2015 Omron Electronics LLC Printed in U.S.A.