Professional Documents
Culture Documents
, Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A2
G E N E R A L I N F O R M AT I O N – S T E E L B O X E S A N D C O V E R S
RACO STEEL BOXES
& COVERS
Applications: Steel Boxes TKO® Provides Reliable with metallic or nonmetallic cover
RACO® high-quality steel boxes: Grounding Path plates, also 4x4 and octagon boxes
• Independent tests conducted by may be used in bearing and non-
• Are used in branch circuit wiring
UL prove that the TKO® passes the bearing wood stud and steel stud
to splice wires
same high-current fault test used walls with ratings not exceeding
• Accommodate wiring devices, two hours.
to test grounding bushings and
such as switches and receptacles
ground lugs The surface area of individual metal-
• Most may also serve as fixture lic outlet or switch boxes shall not
• RACO TKO knockout is UL
® ®
supports exceed 16 square inches through a
Listed, providing bonding without
• Provide excellent protection the use of bonding jumpers fire rated wall. The aggregate surface
for wiring system or devices area of the boxes shall not exceed
• Suitable for bonding without any
• Must be closed with a cover, 100 square inches per 100 square
additional bonding means around
light fixture canopy or wallplate feet. Boxes located on opposite
concentric (or eccentric, TKO)
sides of walls or partitions shall be
• Permit access to conductors knockouts where used in circuits
separated by a horizontal distance
for maintenance above or below 250V
of 24 inches.
• Allow for branch circuit runs • This knockout does not impair the
The metallic outlet or switch boxes
• Provide two-hour fire rating for 4x4 electrical connection to ground
shall be securely fastened to the
or smaller wall opening Most RACO® Boxes Have At studs, and the opening in the wall-
Product Features: Outlet Boxes Least One Tapped #10-32 board facing shall be cut so that the
for Fixture or Fan Support Grounding Hole clearance between the box and the
These high-quality boxes: • The products that do not have wallboard does not exceed 1/8 inch.
a grounding hole are: plenum *Reference: UL Fire Resistance
• Are listed to support lighting fixture
boxes catalog numbers 226 Directory (Orange Book)
canopies or fans
and 239
• Feature oversized #10 screws Standard Material: Steel Covers,
Product Features: Outlet And Switch Boxes
to provide strength and rigidity
Combination Screw Heads
Product Features: • Steel boxes and covers are made
• Cover and clamp screws have of .0625 inch thick pre-galvanized
Patented TKO® Knockouts
combination slotted/Phillips heads sheet steel
• TKO® knockouts offer greater flexi-
• Self-tapping screws provide • Handy Box covers are made of
bility with RACO® patented combi-
for 100% thread engagement .030 inch thick galvanized sheet
nation 1/2" and 3/4" knockout
Metallic Boxes: Fire Resistance steel
• Stock just one product instead
Rating Wall Penetrations*
of two or three
Listed single- and double-gang
• One product for the installer
metallic outlet and switch boxes
to carry
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A3
G E N E R A L I N F O R M AT I O N – S T E E L B O X E S A N D C O V E R S
A4
G E N E R A L I N F O R M AT I O N – S TA N D A R D S , 1 9 9 9 N AT I O N A L E L E C T R I C A L C O D E S ®
RACO STEEL BOXES
& COVERS
Wiring Capacity: Steel Outlet (a) Box Volume Calculations. The (2) Clamp Fill. Where one or
And Switch Boxes; Cubic Inches volume of a wiring enclosure (box) more internal cable clamps, whether
shall be the total volume of the factory or field supplied, are present
Maximum Number of Conductors assembled sections, and, where in the box, a single volume allowance
or Minimum Size Box Required – used, the space provided by plaster in accordance with Table 370-16(b)
National Electrical Code Article rings, domed covers, extension rings, shall be made based on the largest
370-16 etc., that are marked with their vol- conductor present in the box. No
ume in cubic inches or are made allowance shall be required for a
The purpose of NEC Article 370-16 from boxes the dimensions of which cable connector with this clamping
is to determine the maximum con- are listed in Table 370-16(a). mechanism outside the box.
ductor count or the minimum box
size required for an application. It (1) Standard Boxes. The volume (3) Support Fittings Fill. Where
also may be used to determine how of standard boxes that are not one or more fixture studs or hickeys
many other conductors may be marked with a cubic inch capacity are present in the box, a single vol-
added without exceeding the Code- shall be as given in Table 370-16(a). ume allowance in accordance with
prescribed limit. Most applications Table 370-16(b) shall be made for
have determined the number of (2) Other Boxes. Boxes 100 each type of fitting based on the
conductors. The question that then cubic inches (1,640 cu. cm3.) or less, largest conductor present in the box.
remains is the smallest (minimum) other than those described in Table
size box that is permitted. The rules 370-16(a), and nonmetallic boxes (4) Device or Equipment Fill.
of Article 370-16 are to be used to shall be durably and legibly marked For each yoke or strap containing
determine the Code-recognized limit. by the manufacturer with their cubic one or more devices or equipment,
inch capacity. Boxes described in a double volume allowance in accor-
Selection of an outlet or junction box Table 370-16(a) that have a larger dance with Table 370-16(b) shall be
for use in an electrical circuit work cubic inch capacity than is designat- made for each yoke or strap based
must take into consideration the ed in the table shall be permitted to on the largest conductor connected
maximum number of wires permitted have their cubic inch capacity to a device(s) or equipment support-
in the box. Safe electrical practice marked as required by this section. ed by that yoke or strap.
demands that wires not be jammed
into boxes because of the possibility (b) Box Fill Calculations. The (5) Equipment Grounding
of nicks, abrasions or other damage volumes in paragraphs (1) through (5) Conductor Fill. Where one or more
to the insulating material, creating below, as applicable, shall be added equipment grounding conductor(s)
the potential for ground faults or together. No allowance shall be enter(s) a box, a single volume
short circuits. required for small fittings such as allowance in accordance with Table
locknuts and bushings. 370-16(b) shall be made based on
Article 370 – Boxes and Fittings the largest equipment grounding con-
(1) Conductor Fill. Each ductor present in the box. Where an
370-16. Number of Conductors in conductor that originates outside additional set of equipment grounding
Outlet, Device, and Junction the box and terminates or is spliced conductors, as permitted by Section
Boxes, and Conduit Bodies. Boxes within the box shall be counted once, 250-74, Exception #4, is present
shall be of sufficient size to provide and each conductor that passes in the box, an additional volume
free space for all enclosed conduc- through the box without splice or allowance shall be made based on
tors. In no case shall the volume of termination shall be counted once. the largest equipment grounding
the box, as calculated in (a) below, The conductor fill, in cubic inches, conductor in the additional set.
be less than the fill calculation as cal- shall be computed using Table 370-
culated in (b) below. The minimum 16(b). A conductor, no part of which Reprinted with permission from the NFPA 70-1999. National
volume for conduit bodies shall be as leaves the box, shall not be counted. Electrical Code ®‚ Copyright© 1999. National Fire Protection
calculated in (c) below. Exception: Where an equipment Association, Quincy, MA 02269. This reprinted material is not
grounding conductor or not over the complete and official position of the NFPA on the reference
The provisions of this section shall not four fixture wires smaller than subject which is represented only by the standard in its entirety.
apply to terminal housings supplied #14, or both, enter a box, from National Electrical Code ®‚ and NEC®‚ are registered trademarks
with motors. See Section 430-12. a domed fixture or similar canopy of the National Fire Protection Association, Quincy, MA.
and terminate within that box,
Boxes and conduit bodies enclosing it shall be permitted to omit these
conductors, size #4 or larger, shall conductors from the calculations.
also comply with the provisions of
Section 370-28.
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A5
G E N E R A L I N F O R M AT I O N – S TA N D A R D S , 1 9 9 9 N AT I O N A L E L E C T R I C A L C O D E S ®
250-97 (d) Method of Bonding Service Equipment — This Article is used to ensure that there is ground
Bonding Jumpers. Bonding jumpers are not required continuity when a concentric or eccentric knockout
for concentric and eccentric knockouts if they are listed is encountered. A bonding jumper is not required when
for the purpose. using any of the RACO® patented TKO® knockout boxes,
Catalog Numbers 189, 232, etc.
370-27 (a) Boxes at Lighting Fixture Outlets. Boxes Device boxes use #6-32 screws to secure devices such
to support light fixtures must be listed for fixture support. as snap-switches and receptacles. They are not suitable
Exception: Device boxes are allowed to support wall for support of other than very lightweight lighting fixtures,
mounted fixtures not over 6 lbs. such as some wall-bracket types. See Article 410-16.
All RACO® 4" and 4-11/16" square boxes are listed
for fixture support.
370-27 (b) Floor Boxes. Boxes listed specifically for this Only boxes that are UL Listed for the application
application shall be used for receptacles located in the may be fastened into the floor. RACO® floor boxes
floor. Exception: Boxes located in elevated floors of show are in Section E of this catalog.
windows and similar locations where the authority having
jurisdiction judges them free from physical damage,
moisture and dirt.
370-27 (c) Boxes at Fan Outlets. Boxes that support For any ceiling outlet that is intended to have a ceiling
ceiling fans must be listed for that purpose. (paddle) fan installed, a UL Listed outlet box rated for
ceiling fan support must be installed. RACO® offers
a complete line of products designed for various
applications and mounting needs.
410-10 Space for Conductors. Canopies and outlet When calculating the minimum cubic inch requirements
boxes taken together shall provide adequate space so for an outlet box, the canopy may be included in the
that fixture conductors and their connecting devices can calculation at the discretion of the Authority Having
be properly installed. Jurisdiction. If the canopy of the fixture/fan is marked with
the cubic inch capacity, then the additional volume must
be accepted by the Authority Having Jurisdiction.
410-16 (a) Means of Support – Outlet Boxes. Fixtures All outlet boxes that are intended to be used with fixtures
greater than 50 pounds cannot be supported by a fixture are tested in accordance with UL Standard 514-A.
box unless the box has been listed for a heavier load.
410-56 (f) Receptacles in Raised Covers. Receptacles The intent of the additional support screw is to prevent
installed in cover shall not be secured solely by a single the device from coming loose. A loose device could cause
screw. Exception: Devices, assemblies or box covers a safety hazard to personnel while inserting or removing
listed and identified for such use. Note that this does a plug.
not apply to wall plates.
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A6
G E N E R A L I N F O R M AT I O N – S TA N D A R D S , 1 9 9 9 N AT I O N A L E L E C T R I C A L C O D E S ®
RACO STEEL BOXES
& COVERS
MOST OFTEN REQUESTED ARTICLES OF THE 1999 HOW RACO® PRODUCTS HELP COMPLETE
NATIONAL ELECTRICAL CODE® THE INSTALLATION
422-18 Support of Ceiling Fans. Unless otherwise marked, a UL Listed outlet box listed for
(a) Ceiling Fans 35 lbs. or Less. Listed ceiling fans that ceiling fan support can support a maximum of 35 pounds.
do not exceed 35 pounds in weight, with or without All of RACO® steel fan outlet boxes use hardened #10-32
accessories, shall be permitted to be supported by outlet screws for support of the fan. Captive star lock-washers
boxes identified for such use and supported in accor- prevent the screws from loosening, providing a safe and
dance with Sections 370-23 and 370-27. secure installation.
(b) Ceiling Fans Exceeding 35 lbs. Boxes may support
heavier loads when so listed, or the fan shall be support-
ed independently of the outlet box. See Section 370-23.
800-52 (c) Installation of Communications Wires, When power and voice/data are brought to one enclosure,
Cables and Equipment — Electric Light or Power a means of dividing the wiring is required. Voltage dividers
Circuits. Communications conductors shall not be placed are available on the following box types: 4"and 4-11/16"
in any raceway, compartment, outlet box, junction box, square boxes, three- and four-gang switch boxes,
or similar fitting with conductors of electric light or power masonry boxes, and gang boxes.
circuits or Class 1 circuits.
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A7
G E N E R A L I N F O R M AT I O N – B O X S E L E C T I O N
CONDUIT
STEEL
BOXES
4-11/16" Sq. 4" Sq. 4-11/16" Sq. 4" Sq. 4" Sq. Switch Handy
2-1/8" Deep 2-1/8" Deep 1-1/2" Deep 2-1/8" Deep 1-1/2" Deep 3-1/2" Deep 2-1/8" Deep
CONDUIT
STEEL
BOXES
CU. IN. 30.3 21.5 21.0 18.0 15.8 15.5 14.0 12.5 4.0
CABLE
STEEL
BOXES
4" Sq. 4" Oct. 4" Sq. Switch Switch 4" Oct. Switch Switch 3-1/2" Rnd. Pan
2-1/8" Deep 2-1/8" 1-1/2" Deep 3-1/2" Deep 2-9/64" Deep 1-1/2" Deep 2-3/4" Deep 2-1/2" Deep 1/2" Deep
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A8
G E N E R A L I N F O R M AT I O N – B O X S E L E C T I O N
RACO STEEL BOXES
& COVERS
Calculate The Minimum Size Box 4. Each wire coming into the box and This example requires a minimum of
Part (1) of Section 370-16(a) of the connecting to a device counts as 12.0 cubic inches.
National Electrical Code describes one wire of that size. Example #2: — Cable Boxes: This
the detailed way of counting wires, 5. Fixture studs, cable clamps and example will illustrate how the mini-
as well as clamps, fittings or devices hickeys are to be counted as one mum size is determined for a box
(i.e., switches, receptacles, combina- regardless of how many there may with cable clamps fed by two #12-2
tion devices) — by establishing an be. If a box contains two cable nonmetallic sheathed cables and
equivalent conductor value for each. clamps, the total is only to be supplying a 15A duplex receptacle.
Those values are added together to increased by one. After supplying the receptacle, the
get a total number of conductors. 6. Where devices are mounted in the conductors are extended to other
The minimum size box is the smallest box, the total conductor count outlets.
one in Table 370-16(a) that can must be in-creased by two for Circuit conductors 4
accommodate that number each mounting strap. Ground conductors 1
of conductors. Cable clamps 1
Example #1: — Conduit Boxes:
1. No matter how many ground wires Supply power to a switch that will Device (receptacle) 2
come into a box, they only count control a remote light with #14 con- Total 8
as one conductor within the box. ductors. Metal conduit and fittings Using the Box Fill Table below,
2. Any wire running unbroken through will be used as the wire way. You read across the line ”deductions”
the box counts as one wire. must provide space for four conduc- to column 8, then down to the
3. Each wire coming into a splice tors and one switch, totaling 6. Read minimum cubic inches required
device (crimp or twist-on type) is across the line “Deductions” in the for #12 conductor. This example
counted as one wire. Box Fill Table to column 6, then requires a minimum of 18.0
read down to the minimum cubic cubic inches.
inches required for #14 conductor.
B O X F I L L TA B L E
DEDUCTIONS 6 7 8 9 10 11 12 13 14
#18 (1.50) 9.00 10.50 12.00 13.50 15.00 16.50 18.00 19.50 21.00
#16 (1.75) 10.50 12.25 14.00 15.75 17.50 19.25 21.00 22.75 24.50
Volume
#14 (2.00) 12.00 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00
Required per
Conductor #12 (2.25) 13.50 15.75 18.00 20.25 22.50 24.75 27.00 29.25 31.50
Size per #10 (2.50) 15.00 17.50 20.00 22.50 25.00 27.50 30.00 32.50 35.00
Deductions
#8 (3.00) 18.00 21.00 24.00 27.00 30.00 33.00 36.00 39.00 42.00
#6 (5.00) 30.00 35.00 40.00 45.00 50.00 55.00 60.00 65.00 70.00
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A9
G E N E R A L I N F O R M AT I O N – B O X S E L E C T I O N
C L A M P T E C H N I C A L D ATA A N D S T U D T Y P E
R A C E WAY T Y P E
M E TA L C L A D CA B L E
CLAMP TYPE A R M O R E D CA B L E ( B X ) INTERLOCKING (MCI) N O N M E TA L L I C FLEXIBLE CONDUIT
S H E AT H E D CA B L E
STEEL ALUMINUM STEEL ALUMINUM STEEL ALUMINUM
“ L” T Y P E # 1 4 - 2 t o # 1 0 - 3 w / gr o u n d
“X” TYPE #14-2 (.444 in #14-2 (.444 in
outer diam.) to outer diam.) to .425 to .600 .425 to .600
largest size to largest size to outer diam. outer diam. 3/8” trade size 3/8” trade size
fit in clamp fit in clamp
“ # 9 O R A O L” T Y P E #14-2 w/ground
“BN” TYPE # 1 4 - 2 t o # 1 0 - 3 w / gr o u n d
“Q” TYPE # 1 4 - 2 w / g r o u n d o r # 1 2 - 2 w / gr o u n d
“L” TYPE “X” TYPE “#9 OR AOL” TYPE “BN” TYPE “O” TYPE
1/2" 1"
CONDUIT CONDUIT
KO KO
3/4" TKO
CONDUIT 7/8"
CONDUIT CABLE PRIOUTS FLAT-BOTTOMED ONE-SCREW EAR TWO-SCREW EAR
KO 1-3/32"
KO Always in pairs. CABLE PRIOUTS
Adjustable plaster ears are included on
Eliminate chance
many switch boxes and one octagon
of cable being cut.
box. They are set forward 1/32".
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A10 C E I L I N G FA N S U P P O R T P R O D U C T S
Application
RACO STEEL BOXES
Application
& COVERS
fan and ceiling or wall light fixture
support
Product Features
295-1 295 296-1 296
• 295-1, 295 include nonmetallic
sheathed cable connector,
mounting hardware, and
instructions
Compliance
• ®
– File E195978
294-1 294 299
O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
4 " R O U N D C E I L I N G FA N PA N - 1 / 2 " D E E P – D R AW N
WITH CONDUIT KO’S – 6.0 CUBIC INCHES
KNOCKOUTS M A X . RECOMMENDED
SUPPORT LOADS
C ATA L O G STD. U P C
NUMBER DESCRIPTION SIDES B OT T O M PKG. BAR CEILING FAN FIXTURE
CODE (DYNAMIC) (STATIC)
CABLE C O N D. C O N D. LBS. LBS.
295-1 — — — 4-1/2" 10 — 35 75
295 — — — 4-1/2" 10* 35 75
* P a c k a g e d i n a s t a c k ab l e , i n d i v i d u a l c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
* P a c k a g e d i n a s t a c k ab l e , i n d i v i d u a l c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
4 " O C TA G O N C E I L I N G FA N B O X – 2 - 1 / 8 " D E E P – D R AW N
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 2 1 . 5 C U B I C I N C H E S
KNOCKOUTS M A X . RECOMMENDED
SUPPORT LOADS
C ATA L O G D E S C R I P T I O N STD. U P C
NUMBER BRACKET & SIDES B OT T O M PKG. BAR CEILING FAN FIXTURE
SETBACK CODE (DYNAMIC) (STATIC)
CABLE C O N D. C O N D. LBS. LBS.
294-1 FA brkt., 1/2" 2 2-1/2" 1-1/2" 10 — 35 50
294 FA brkt., 1/2" 2 2-1/2" 1-1/2" 10* 35 50
* P a c k a g e d i n a s t a c k ab l e , i n d i v i d u a l c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
* S o l d i n s h i p c a r t o n q u a n t i t i e s o n ly. H u b b e l l ® R A C O ® d o e s n o t b r e a k c a r t o n q u a n t i t i e s o n t h e s e i t e m s
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A12 C E I L I N G FA N S U P P O R T P R O D U C T S
• RETRO-BRACE™ is intended
for installations of heavy lighting
& COVERS
* S o l d i n s h i p c a r t o n q u a n t i t i e s o n ly. H u b b e l l ® R A C O ® d o e s n o t b r e a k c a r t o n q u a n t i t i e s o n t h e s e i t e m s
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
C E I L I N G PA N S
1/2" AND 3/4" DEEP – 3-1/2" ROUND
A13
Application
& COVERS
lighting fixtures
• Ceiling pans on this page
are not designed for ceiling
fan support
Product Feature
• Combination screw heads provide
for faster installation
Compliance
• – File E195978
703
®
O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
*5 Bundles of 10
C ATA L O G N U M B E R A B
292, 8292 9/16" 3-3/8"
287 3/4" 3-3/8"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A14 C E I L I N G PA N S
1/2" DEEP – 4" ROUND
Applications
RACO STEEL BOXES
lighting fixtures
• RACO 293 and 8293 are not
designed for ceiling fan support
Product Features
• 295-1, 295 include nonmetallic
sheathed cable connector, mounting
hardware, and instructions
• Lock-washers on 295, 295-1
prevent the high-strength, hardened
screws from loosening from vibration 293, 8293 295-1 295
Compliance
• – File E195978 O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
®
4" ROUND CEILING FAN AND FIXTURE PAN – 1/2" DEEP – DRAWN
WITH CONDUIT KO’S – 6.0 CUBIC INCHES
KNOCKOUTS M A X . RECOMMENDED
SUPPORT LOADS
C ATA L O G S T D. U P C
NUMBER DESCRIPTION SIDES B OT T O M PKG. BAR CEILING FAN FIXTURE
C O D E (DYNAMIC) (STATIC)
C O N D. C O N D. LBS. LBS.
293 Rnd. ceiling pan — 5-1/2" 50 — No 50
8293 Rnd. ceiling pan — 5-1/2" 50 No 50
295-1 — — 4-1/2" 10 — 35 75
295 — — 4-1/2" 10* 35 75
* P a c k a g e d i n a s t a c k ab l e , i n d i v i d u a l c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
4" ROUND PAN
DIMENSIONS
C ATA L O G A B
NUMBER
293, 8293 4" 9/16"
295, 295-1 4" 9/16"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
O C TA G O N B O X E S
1-1/2" DEEP
A15
Applications
& COVERS
wall lighting fixtures
• Extension rings provide a
means for adding additional
cubic capacity or as an outlet
box for surface conduit
Product Features
• Combination screw heads provide
for faster installation
• RACO® offers a variety of labor
saving mounting brackets that 110 112 119 111
allow for easy positioning of box
along studs or joists O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
• See Box Selection section in the
front of this catalog for complete 3 - 1 / 2 " O C TA G O N B O X – 1 - 1 / 2 " D E E P – D R AW N
description of bracket types and WITH CONDUIT KO’S – 11.8 CUBIC INCHES
features KNOCKOUTS M A X . RECOMMENDED
DESCRIPTION UPC S UPPORT LOADS
Compliance C ATA L O G B R A C K E T & SIDES B OT T O M S T D. B A R CEILING FAN FIXTURE
N U M B E R SETBACK C O N D. C O N D. P K G . C O D E (DYNAMIC) (STATIC)
• ®
– File E195978 LBS. LBS.
110 — 4-1/2" 1-1/2" 50 No 50
3 - 1 / 2 " O C TA G O N B O X – 1 - 1 / 2 " D E E P – D R AW N
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 1 1 . 8 C U B I C I N C H E S
KNOCKOUTS M A X . RECOMMENDED
DESCRIPTION SIDES B OT T O M UPC S UPPORT LOADS
C ATA L O G B R A C K E T & S T D. B A R CEILING FAN FIXTURE
N U M B E R SETBACK C A B L E C O N D. C O N D. P K G . C O D E (DYNAMIC) (STATIC)
LBS. LBS.
112 — 4 2-1/2" 1-1/2" 50 — No 50
119 TS brkt., 1/2" 4 1-1/2" 1-1/2" 25 — No 50
3 - 1 / 2 " O C TA G O N E X T E N S I O N R I N G – 1 - 1 / 2 " D E E P – D R AW N
WITH CONDUIT KO’S – 11.8 CUBIC INCHES
DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
BRACKET & BAR
NUMBER SIDES B OT T O M PKG.
SETBACK CODE
C O N D. C O N D.
111 Extension ring 4-1/2" — 25
A16 O C TA G O N B O X E S
1-1/2" DEEP
Application
RACO STEEL BOXES
lighting fixtures
Product Features
• Combination screw heads provide
for faster installation 125, 8125 126 127, 8127
• RACO offers a variety of labor
®
4" OCTAGON
DIMENSIONS
C ATA L O G A B C D E F
NUMBER
125, 8125 4" 1-9/16" — — — —
126 4" 1-9/16" — — — —
127, 8127 4" 1-9/16" — — — —
158 4" 1-9/16" — 1/2" — 3-1/8"
161 4" 1-9/16" 7-5/32" 1/2" 1-1/4" —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
O C TA G O N B O X E S
1-1/2" DEEP
A17
Applications
& COVERS
lighting fixtures
• Extension rings provide a means
for adding additional cubic 128, 8128 324
130 146, 8146
capacity or as an outlet box for
surface conduit
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box
along studs or joists 145 150 160, 8160 164, 8164
• See Box Selection section in the
front of this catalog for complete O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
description of bracket types and
features
4 " O C TA G O N E X T E N S I O N R I N G S – 1 - 1 / 2 " D E E P – D R AW N
• Fixture bar hanger allows box to WITH CONDUIT KO’S – 15.5 CUBIC INCHES
be located anywhere along length DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
of bar BRACKET & SIDES B OT T O M BAR
NUMBER PKG.
SETBACK C O N D. C O N D. CODE
• RACO® 324 includes a 3/8"
128 Extension ring 4-1/2" — 50 —
trade sized stud to accommodate
8128 Extension ring 4-1/2" — 25
fixture stem
130 Extension ring 2-1/2", 2-3/4" — 50
• Combination screw heads provide
for faster installation 4 " O C TA G O N W I T H B A R H A N G E R – 1 - 1 / 2 " D E E P – D R AW N
WITH CONDUIT KO’S – 15.5 CUBIC INCHES
Compliances
KNOCKOUTS M A X . RECOMMENDED
• ® – File E195978 DESCRIPTION UPC SUPPORT LOADS
C ATA L O G BRACKET & SIDES B OT T O M S T D. B A R CEILING FAN FIXTURE
• ®
– File LR-1082 (128, 8128, 130) NUMBER SETBACK C O N D. C O N D. P K G . C O D E (DYNAMIC) (STATIC)
LBS. LBS.
3/8" Stud, adj.
324 14 -1/4" to 22-1/2" 4-1/2" 4-1/2" 25 No 10*
DIMENSIONS
C ATA L O G A B C D E F
NUMBER
146, 8146 4" 1-9/16" — — — —
145 4" 1-9/16" — — — —
150 4" 1-9/16" — — — —
160, 8160 4" 1-9/16" — 1/2" — 3-1/8"
164, 8164 4" 1-9/16" 7-5/32" 1/2" 1-1/4" —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A18 O C TA G O N B O X E S
1-1/2" DEEP
Application
RACO STEEL BOXES
lighting fixtures
Product Features
• RACO® offers a variety of labor 296-1 296 326, 8326
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the
front of this catalog for complete
description of bracket types and
features 153 155 157
• Fixture bar hanger allows box to
be located anywhere along length O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
of bar
• RACO® 326, 8326 includes 3/8"
4 " O C TA G O N C E I L I N G FA N A N D F I X T U R E B O X – 1 - 1 / 2 " D E E P – D R AW N
trade sized stud to accommodate W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 1 5 . 5 C U B I C I N C H E S
fixture stem M A X . RECOMMENDED
KNOCKOUTS
DESCRIPTION SUPPORT LOADS
• RACO® 296, 296-1 ceiling C ATA L O G S T D. U P C
NUMBER BRACKET & SIDES B OT T O M PKG. B A R CEILING FAN FIXTURE
fan boxes have lock-washers SETBACK C O D E (DYNAMIC) (STATIC)
C A B L E C O N D. C O N D. LBS. LBS.
to prevent the high-strength,
hardened screws from loosening 296-1 — 4 2-1/2" 1-1/2" 20 — 35 75
from vibration 296 — 4 2-1/2" 1-1/2" 8* 35 75
14-1/4" to 22-1/2"
3/8" Stud, adj.
8326 14-1/4" to 22-1/2" 4 2-1/2" — 25 No 10*
4 " O C TA G O N B O X – 1 - 1 / 2 " D E E P – D R AW N
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 5 . 5 C U B I C I N C H E S
KNOCKOUT M A X . RECOMMENDED
DESCRIPTION SIDES B OT T O M UPC SUPPORT LOADS
C ATA L O G BRACKET & S T D. B A R CEILING FAN FIXTURE
NUMBER SETBACK C A B L E C O N D. C O N D. PKG. C O D E (DYNAMIC) (STATIC)
LBS. LBS.
153 — 4 2-1/2" 1-1/2" 25 No 50
155 TS brkt., 1/2" 4 1-1/2" 1-1/2" 50 No 50
J brkt., 3/8"
157 or 1/2" 4 2-1/2" 1-1/2" 50 No 50
DIMENSIONS
C ATA L O G A B C D E F
NUMBER
296, 296-1 4" 1-9/16" — — — —
153 4" 1-9/16" — — — —
155 4" 1-9/16" 7-5/32" 1/2" 1-1/4" —
157 4" 1-9/16" — 1/2" — 3-1/8"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
O C TA G O N B O X E S
1-1/2" AND 2-1/8" DEEP
A19
Application
& COVERS
lighting fixtures
Product Features
• Fixture bar hanger allows box to
325, 8325 165
be located anywhere along length
of bar
• RACO® 325, 8325 box includes
3/8" trade sized stud to
accommodate fixture stem
Compliance
166 167 299
• ®
– File E195978
4 " O C TA G O N B O X W I T H B A R H A N G E R – 1 - 1 / 2 " D E E P – D R AW N
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 5 . 5 C U B I C I N C H E S
KNOCKOUTS M A X . RECOMMENDED
DESCRIPTION SIDES B OT T O M UPC SUPPORT LOADS
C ATA L O G B R A C K E T & S T D. B A R CEILING FAN FIXTURE
NUMBER SETBACK CABLE C O N D. C O N D. P K G . CODE (DYNAMIC) (STATIC)
LBS. LBS.
3/8" Stud, adj.
325 14-1/4" – 22-1/2" 4 2-1/2" — 25 — No 10*
3/8" Stud, adj.
8325 14-1/4" – 22-1/2" 4 2-1/2" — 25 No 10*
4 " O C TA G O N B O X – 2 - 1 / 8 " D E E P – D R AW N
WITH CONDUIT KO’S – 21.5 CUBIC INCHES
KNOCKOUTS M A X . RECOMMENDED
DESCRIPTION SIDES B OT T O M UPC SUPPORT LOADS
C ATA L O G BRACKET & S T D. BAR CEILING FAN FIXTURE
NUMBER SETBACK C O N D. C O N D. PKG. CODE (DYNAMIC) (STATIC)
LBS. LBS.
165 — 4-1/2" 5-1/2" 50 — No 50
3-1/2"
166 — 4-3/4" 2-3/4" 50 — No 50
2-1/2", 2-3/4"
167 — 2-3/4" 3-1/2" 50 No 50
4 " O C TA G O N B O X – 2 - 1 / 8 " D E E P – D R AW N
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 2 1 . 5 C U B I C I N C H E S
KNOCKOUTS M A X . RECOMMENDED
DESCRIPTION SIDES B OT T O M UPC SUPPORT LOADS
C ATA L O G B R A C K E T & S T D. B A R CEILING FAN FIXTURE
NUMBER SETBACK C O N D. CABLE C O N D. P K G . CODE (DYNAMIC) (STATIC)
LBS. LBS.
299 — 4" 2-1/2" 1-1/2" 50 — No 50
* P a c k a g e d i n a s t a c k ab l e , i n d i v i d u a l c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
DIMENSIONS
C ATA L O G A B C D E F
NUMBER
165 4" 2-1/8" — — — —
166 4" 2-1/8" — — — —
167 4" 2-1/8" — — — —
299 4" 2-1/8" — — — —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A20 O C TA G O N B O X E S
2-1/8" DEEP
Application
RACO STEEL BOXES
lighting fixtures
Product Features
• RACO® offers a variety of labor
saving mounting brackets that 175 177
allow for easy positioning of box
along studs or joists
• See Box Selection section in the
front of this catalog for complete
description of bracket types and
features 176 294-1 294
• Combination screw heads provide
for faster installation O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
• RACO® 294, 294-1 ceiling
fan boxes have lock-washers
4 " O C TA G O N B O X – 2 - 1 / 8 " D E E P – D R AW N
to prevent the high strength, W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 2 1 . 5 C U B I C I N C H E S
hardened screws from loosening
KNOCKOUTS M A X . RECOMMENDED
from vibration DESCRIPTION SIDES UPC SUPPORT LOADS
C ATA L O G B R A C K E T & B OT T O M S T D. B A R CEILING FAN FIXTURE
Compliance NUMBER SETBACK P K G . CODE
C A B L E C O N D. C O N D. (DYNAMIC) (STATIC)
• ®
– File E195978 LBS. LBS.
175 — 4 2-1/2" 1-1/2" 50 No 50
177 TS brkt., 1/2" 4 1-1/2" 1-1/2" 25 — No 50
176 J brkt., 5/8" 4 2-1/2" 1-1/2" 25 No 50
4 " O C TA G O N C E I L I N G FA N A N D F I X T U R E B O X – 2 - 1 / 8 " D E E P – D R AW N
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 2 1 . 5 C U B I C I N C H E S
KNOCKOUTS M A X . RECOMMENDED
C ATA L O G D E S C R I P T I O N S T D. U P C SUPPORT LOADS
NUMBER B R A C K E T & S I D E S B OT T O M PKG. B A R CEILING FAN FIXTURE
SETBACK CODE (DYNAMIC) (STATIC)
C A B L E C O N D. C O N D. LBS. LBS.
294-1 FA brkt., 1/2" 2 2-1/2" 1-1/2" 10 — 35 75
294 FA brkt., 1/2" 2 2-1/2" 1-1/2" 10* 35 75
* P a c k a g e d i n a s t a c k ab l e , c h i p b o a r d b o x s u i t ab l e f o r s h e l f d i s p l ay
O C TA G O N A N D R O U N D C O V E R S
A21
Applications
& COVERS
• Switches or receptacles may be
installed into octagon boxes by
using covers 729 or 731 724, 8724, 8724-5 731, 8731-5
722, 8722, 8722-5 729
• Raised covers are used for
mounting lighting fixtures
• 5" Round closure plates are
designed for use in dry locations
for closure at unused ceiling
outlets
Product Features 727, 732, 737 5652-1 5653-1 5654-1
• Rugged metallic construction
• 5" Round covers feature state- O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
of-the-art powder coat paint finish
which provides a light texture finish 4 " O C TA G O N A N D R O U N D C O V E R S
and scratch resistance
MAX. RECOMMENDED
Compliances C ATA L O G DESCRIPTION C U . S T D.
UPC S U P P O R T L OA D S
BAR CEILING FAN FIXTURE
• ®
– File E195978 NUMBER IN. PKG. CODE (DYNAMIC) (STATIC)
LBS. LBS.
• ® – File LR-1082 (722, 729, 731)
722 Flat, blank — 100 — No No
ROUND CLOSURE PLATES 8722 Flat, blank — 100 No No
CAT. NO. 5652-1 CAT. NO. 5653-1 8722-5 Flat, blank — 50* No No
724 F l a t , 1/ 2 " K O — 100 — No No
8724 F l a t , 1/ 2 " K O — 100 No No
8724-5 F l a t , 1/ 2 " K O — 50* No No
729 Flat, toggle switch — 50 No No
731 Flat, duplex receptacle — 50 No No
8731-5 Flat, duplex receptacle — 50* No No
737 R a i s e d 1/ 2 ", o p e n , e a r s 2 - 3 / 4 " O . C . 3.0 50 No 50
727 R a i s e d 5 / 8", o p e n , e a r s 2 - 3 / 4 " O . C . 3.8 100 — No 50
732 R a i s e d 1", o p e n , e a r s 2 - 3 / 4 " O . C . 6.5 25 — No 50
5 " R O U N D S T E E L C L O S U R E P L AT E S
C ATA L O G COLOR DESCRIPTION PKG. S T D. UPC
NUMBER TYPE PKG. BAR CODE
Screw & universal
5652-1 Off-white mount strap Shrink 10
Applications
RACO STEEL BOXES
switches or receptacles
• Square boxes are used where
multiple conductor runs are split
into two or more directions to 185 190, 8190 191, 8191
bring power to a number of
electrical devices
• Drawn boxes are ideal for exposed
work applications
Product Features
• Combination screw heads provide 192, 8192 181 204
189, 8189
for faster installation
• Thru-the-wall box is designed for O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
shallow wall applications and
allows for attachment of wall 4" SQUARE – 1-1/4" DEEP – DRAWN
plate to both faces of box WITH CONDUIT KO’S – 18.0 CUBIC INCHES
DESCRIPTION KNOCKOUTS UPC
• TKO® knockouts offer greater C ATA L O G
BRACKET & SIDES B OT T O M
S T D.
BAR
flexibility with RACO® patented NUMBER PKG.
SETBACK C O N D. C O N D. CODE
combination 1/2" and 3/4" 185 — 10-1/2" 5-1/2" 50
knockout
• TKO® knockouts allow for 4" SQUARE – 1-1/2" DEEP – DRAWN
WITH CONDUIT KO’S – 21.0 CUBIC INCHES
design and installation flexibility
DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
Compliances NUMBER
BRACKET & SIDES B OT T O M
PKG.
BAR
SETBACK C O N D. C O N D. CODE
• – File E195978
190 — 1 2 - 1/ 2 " 5-1/2" 50 —
®
DIMENSIONS
C ATA L O G A B C
NUMBER
185 1-1/2" — —
190, 8190 1-1/2" — —
191, 8191 1-1/2" — —
192, 8192 1-1/2" — —
189, 8189 1-1/2" — —
181 1-1/2" — —
204 1-1/2" — —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
4" SQUARE BOXES
1-1/2" DEEP
A23
Applications
& COVERS
switches or receptacles
• Square boxes are used where
multiple conductor runs are split
into two or more directions to
197, 208, 8208 193
bring power to a number of
8197
electrical devices
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box 196, 8196 199 227 BOX-LOC ®
along studs or joists
• See Box Selection section in the O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
front of this catalog for complete
description of bracket types and 4" SQUARE BRACKETED BOXES – 1-1/2" DEEP – WELDED
features WITH CONDUIT KO’S – 21.0 CUBIC INCHES
• BOX-LOC® (MS) Bracket Box is DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
BRACKET & SIDES B OT T O M BAR
a snap to install. Place the bracket NUMBER
SETBACK C O N D. C O N D.
PKG.
CODE
on the open side of the stud first. 250V 197 FH, flush 6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25 —
Slots in the bracket engage the lip 250V 8197 FH, flush 6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25
of the stud and actually crimp it as 250V 208 W, f l u s h 6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25 —
you press the bracket on the stud. 250V 8208 W, f l u s h 6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25
Barbed hooks dig into the flat side 250V 193 B, flush 6 - 1/ 2 ", 4 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25 —
of the stud, quickly locking it 250V 196 FM, flush 6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25 —
into place 250V 8196 FM, flush 6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25
• TKO® knockouts offer greater 199 FM, flush 6 - 3/ 4 " 1 - 1/ 2 ", 4 - 3/ 4 " 25 —
flexibility with RACO® patented 250V 227
BOX-LOC® (MS)
6 - 1/ 2 ", 3 – T K O ® 3 - 1/ 2 ", 2 – T K O ® 25
combination 1/2" and flush
3/4" knockout
DIMENSIONS
• TKO® knockouts allow for
C ATA L O G A B C
design and installation flexibility NUMBER
Compliances 197, 8197 1-1/2" 7-3/8" 4-3/8"
• – File E195978 208, 8208 1-1/2" 6-13/16" 5-15/16"
®
Applications
RACO STEEL BOXES
switches or receptacles
• Square boxes are used where
multiple conductor runs are split
213 219 224
into two or more directions to
bring power to a number of
electrical devices
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box 218, 8218 229 BOX-LOC ®
along studs or joists
• See Box Selection section in the O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
front of this catalog for complete
description of bracket types
and features 4" SQUARE – 1-1/2" DEEP – WELDED
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 2 1 . 0 C U B I C I N C H E S
• BOX-LOC® (MS) Bracket Box DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
is a snap to install. Place the BRACKET & SIDES B OT T O M BAR
NUMBER PKG.
SETBACK C A B L E C O N D. C O N D. CODE
bracket on the open side of the
4 - 1/ 2 ",
stud first. Slots in the bracket 250V 213 — 4 2 – TKO® 1 - 1/ 2 " 50 —
engage the lip of the stud and 2 - 1/ 2 ",
actually crimp it as you press 250V 219 FH, flush 4 1 – TKO® 1 - 1/ 2 " 25 —
the bracket on the stud. Barbed 2 - 1/ 2 ",
250V 224 B, flush 4 1 – TKO® 1 - 1/ 2 " 25 —
hooks dig into the flat side of the
stud, quickly locking it in place 2 - 1/ 2 ",
250V 218 FM, flush 4 1 – TKO® 1 - 1/ 2 " 25 —
• Combination screw heads 2 - 1/ 2 ",
provide for faster installation 250V 8218 FM, flush 4 1 – TKO® 1 - 1/ 2 " 25
BOX-LOC® 2 - 1/ 2 ",
• TKO® knockouts offer greater 250V 229
(MS) flush
4
1 – TKO®
1 - 1/ 2 " 25
flexibility with RACO® patented
combination 1/2" and
DIMENSIONS
3/4" knockout
C ATA L O G
• TKO knockouts allow for
®
NUMBER
A B C
design and installation flexibility 213 1-1/2" — —
Compliances 218 1-1/2" 6-7/8" 4-3/8"
• ®
– File E195978 219 1-1/2" 7-3/8" 4-3/8"
224 1-1/2" 2" 6"
All RACO® single gang, two 229 1-1/2" 4-5/8" 5-1/2"
gang, 4" square, and single
gang gangable U.L. listed steel 4" SQUARE BOXES
boxes are acceptable for use
in 2-hour fire rated walls. For
additional information, consult
U.L. “Fire Resistance Directory”
or the U.L. website at www.ul.com
250V Per U.L. 514-A, suitable for use
without a bonding jumper in circuits
above or below 250 volts
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
4" SQUARE BOXES
1-1/2" DEEP
A25
Applications
& COVERS
switches or receptacles
• Square boxes are used where
multiple conductor runs are split
into two or more directions to 211, 8211 220, 8220 225
bring power to a number of
electrical devices
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box 223 228 BOX-LOC ®
along studs or joists
• See Box Selection section in the O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
front of this catalog for complete
description of bracket types
and features 4" SQUARE – 1-1/2" DEEP – WELDED
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 2 1 . 0 C U B I C I N C H E S
• BOX-LOC® (MS) Bracket Box C ATA L O G
DESCRIPTION KNOCKOUTS
S T D.
UPC
is a snap to install. Place the BRACKET & SIDES B OT T O M BAR
NUMBER PKG.
SETBACK C A B L E C O N D. C O N D. CODE
bracket on the open side of the
4 - 1/ 2 ",
stud first. Slots in the bracket 250V 211 — 4 2 – TKO® 1 - 1/ 2 " 50 —
engage the lip of the stud and 4 - 1/ 2 ",
250V 8211 — 4 1 - 1/ 2 " 50
actually crimp it as you press 2 – TKO®
the bracket on the stud. Barbed 250V 220 FH, flush 4
2 - 1/ 2 ",
1 – TKO® 1 - 1/ 2 " 25 —
hooks dig into the flat side of the
2 - 1/ 2 ",
stud, quickly locking it in place 250V 8220 FH, flush 4 1 – TKO® 1 - 1/ 2 " 25
• Combination screw heads 2 - 1/ 2 ",
250V 225 B, flush 4 1 – TKO® 1 - 1/ 2 " 25 —
provide for faster installation
2 - 1/ 2 ",
• TKO® knockouts offer greater 250V 223 FM, flush 4 1 – TKO® 1 - 1/ 2 " 25
flexibility with RACO® patented BOX-LOC ®
2 - 1/ 2 ",
250V 228 4 1 - 1/ 2 " 25
combination 1/2" and (MS) flush 1 – TKO®
3/4" knockout
• TKO® knockouts allow for DIMENSIONS
design and installation flexibility C ATA L O G A B C
Compliances NUMBER
211, 8211 1-1/2" — —
• – File E195978
®
220, 8220 1-1/2" 7-3/8" 4-3/8"
All RACO® single gang, two 225 1-1/2" 2" 6"
gang, 4" square, and single 223 1-1/2" 6-7/8" 4-3/8"
gang gangable U.L. listed steel 228 1-1/2" 4-5/8" 5-1/2"
boxes are acceptable for use
in 2-hour fire rated walls. For 4" SQUARE BOXES
additional information, consult
U.L. “Fire Resistance Directory”
or the U.L. website at www.ul.com
250V Per U.L. 514-A, suitable for use
without a bonding jumper in circuits
above or below 250 volts
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
ING
COM ON
Applications SO
RACO STEEL BOXES
switches or receptacles
• Square boxes are used where
232, 8232 244
multiple conductor runs are split 231, 8231 233, 8233 NEW
into two or more directions to
bring power to a number of
electrical devices
Product Features
• RACO® offers a variety of labor NEW
saving mounting brackets that
allow for easy positioning of box 235, 8235 236 237 238
1/2" & 3/4" TKO ® BOX-LOC ®
along studs or joists
• See Box Selection section in the O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
front of this catalog for complete
description of bracket types 4" SQUARE – 2-1/8" DEEP – WELDED
and features WITH CONDUIT KO’S – 30.3 CUBIC INCHES
DESCRIPTION KNOCKOUTS UPC
• BOX-LOC® (MS) Bracket Box C ATA L O G S T D.
BRACKET & SIDES B OT T O M BAR
is a snap to install. Place the NUMBER PKG.
SETBACK C O N D. C O N D. CODE
bracket on the open side of the 250V 232 — 8 - 1/ 2 ", 4 - T K O ® 3 - 1/ 2 ", 2 - T K O ® 25 —
stud first. Slots in the bracket 250V 8232 — 8 - 1/ 2 ", 4 - T K O ® 3 - 1/ 2 ", 2 - T K O ® 25
engage the lip of the stud and 231 — 8 -3/ 4 " 1 - 1/ 2 ", 4 - 3/ 4 " 25 —
actually crimp it as you press the 8231 — 8 -3/ 4 " 1 - 1/ 2 ", 4 - 3/ 4 " 25
bracket on the stud. Barbed hooks 233 — 8-1" 3 - 1/ 2 ", 2 - 3/ 4 " 25 —
dig into the flat side of the stud, 8233 — 8-1" 3 - 1/ 2 ", 2 - 3/ 4 " 25
quickly locking it in place 250V 235 TS, flush 6 - 1/ 2 ", 3 - T K O ® 3 - 1/ 2 ", 2 - T K O ® 25 —
• Combination screw heads 250V 8235 TS, flush 6 - 1/ 2 ", 3 - T K O ® 3 - 1/ 2 ", 2 - T K O ® 25
provide for faster installation 236 FM, flush 6 - 3/ 4 " 1 - 1/ 2 ", 4 - 3/ 4 " 25
250V 237 FM, flush 8 - 1/ 2 ", 4 - T K O ® 3 - 1/ 2 ", 2 - T K O ® 25
• TKO® knockouts offer greater
BOX-LOC®
flexibility with RACO® patented 250V 238
(MS) flush
8 - 1/ 2 ", 4 - T K O ®
3 - 1/ 2 ", 2 - T K O ®
25
combination 1/2" and
3/4" knockout 4" SQUARE - 2-1/8" DEEP - DRAWN
WITH CONDUIT KO’S - 30.3 CUBIC INCHES
• TKO knockouts allow for
®
Applications
& COVERS
enclosures are required
• Square boxes are used where
multiple conductor runs are split
into two or more directions to
bring power to a number of
electrical devices
Product Features
• To maintain plenum seal, both
RACO® 226 and 239 do not
provide ground screw holes 226 239 762
• Cover gasket is PVC foam material
Compliance O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
• ®
– File E195978
4" SQUARE PLENUM – BOXES & COVER – 1-1/2" & 2-1/8" DEEP – DRAWN
WITH CONDUIT KO’S
DESCRIPTION KNOCKOUTS UPC
C ATA L O G CU. S T D.
BRACKET & BAR
NUMBER SIDES B OT T O M IN. PKG.
SETBACK CODE
8 - 1/ 2 " 3 - 1/ 2 "
226 1 - 1/ 2 " D e e p 4 - 3/ 4 " 2 - 3/ 4 " 21.0 50 —
8 - 1/ 2 " 3 - 1/ 2 "
239 2 - 1/ 8 " D e e p 4 - 3/ 4 " 2 - 3/ 4 " 30.3 25 —
G a s k e t e d c o v e r fo r
762 4" square boxes — — — 50 —
Applications
RACO STEEL BOXES
or receptacles
• Square boxes are used where
multiple conductor runs are split
242 240, 8240 241, 8241
into two or more directions to
bring power to a number of
electrical devices NEW
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box 243 248
along studs or joists BOX-LOC®
• See Box Selection section in the O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
front of this catalog for complete
description of bracket types
and features 4" SQUARE – 2-1/8" DEEP
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 3 0 . 3 C U B I C I N C H E S
• BOX-LOC® (MS) Bracket Box
DESCRIPTION KNOCKOUTS UPC
is a snap to install. Place the C ATA L O G S T D.
BRACKET & SIDES B OT T O M BAR
NUMBER PKG.
bracket on the open side of the SETBACK C A B L E C O N D. C O N D. CODE
stud first. Slots in the bracket 4 - 1/ 2 ",
250V 242 — 4 2 – TKO® 1 - 1/ 2 " 25 —
engage the lip of the stud and
2 - 1/ 2 ",
actually crimp it as you press the 250V 240 TS, flush 4 1 – TKO® 1 - 1/ 2 " 25 —
bracket on the stud. Barbed hooks 2 - 1/ 2 ",
dig into the flat side of the stud, 250V 8240 TS, flush 4 1 - 1/ 2 " 25
1 – TKO®
quickly locking it in place
• Combination screw heads provide 4" SQUARE – 2-1/8" DEEP
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 3 0 . 3 C U B I C I N C H E S
for faster installation
DESCRIPTION KNOCKOUTS UPC
• TKO® knockouts offer greater C ATA L O G S T D.
BRACKET & SIDES B OT T O M BAR
NUMBER PKG.
flexibility with RACO® patented SETBACK C A B L E C O N D. C O N D. CODE
combination 1/2" and 2 - 1/ 2 ",
250V 241 TS, flush 4 1 – TKO® 1 - 1/ 2 " 25 —
3/4" knockout
2 - 1/ 2 ",
• TKO® knockouts allow for 250V 8241 TS, flush 4 1 – TKO® 1 - 1/ 2 " 25
design and installation flexibility BOX-LOC® 2 - 1/ 2 ",
250V 243 (M S ) f l u s h 4 1 – TKO® 1 - 1/ 2 " 25
Compliances
4 - 1/ 2 ",
250V 248 — 4 1 - 1/ 2 " 25
• ®
– File E195978 2 – TKO®
Applications
& COVERS
• Raised device covers are used for
mounting switches or receptacles
Product Feature 752, 8752, 753, 8753, 756-759, 767,
• Angled mounting slots compensate 8752-5 8753-5 8756, 8767
up to 12° for box misalignment
Compliances
• ®
– File E195978
• – File LR-1082
787, 8787 768, 771, 773-775, 772 785-786
782, 8768-8782
O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
*5 Bundles of 10
4 " S Q U A R E C O M B I N AT I O N – D E V I C E A N D T I L E C O V E R S – S I N G L E D E V I C E
C ATA L O G DESCRIPTION CU. S T D. UPC
NUMBER IN. PKG. BAR CODE
787 Flat — 50 —
8787 Flat — 50
771 R a i s e d 1/ 4 " 1.5 100 —
8771 R a i s e d 1/ 4 " 1.5 25
772 R a i s e d 1/ 2 ", d r a w n 3.5 100 —
8772 R a i s e d 1/ 2 ", d r a w n 3.5 50
782 R a i s e d 1/ 2 ", t i l e 3.5 25 —
8782 R a i s e d 1/ 2 ", t i l e 3.5 25
768 R a i s e d 5 / 8" 4.5 50 —
8768 R a i s e d 5 / 8" 4.5 50
773 R a i s e d 3 / 4" 5.5 50 —
8773 R a i s e d 3 / 4" 5.5 50
774 Raised 1" 7.5 25
775 R a i s e d 1 - 1/ 4 " 9.5 25 —
8775 R a i s e d 1 - 1/ 4 " 9.5 25
785 R a i s e d 1 - 1/ 2 " 11.3 25 —
786 Raised 2" 14.5 25 —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
A30 4 " S Q U A R E C O V E R S A N D PA R T I T I O N S
Applications
RACO STEEL BOXES
* B o x e s , c o v e r s , a n d p a r t i t i o n s m u s t b e o r d e r e d s e p a r at e l y
* F o r 1 - 1 / 2 " d e e p b o x w i t h 5 / 8 " c o v e r, p a r t i t i o n n o t av a i l a b l e
* F o r 2 - 1 / 8 " d e e p b o x w i t h 5 / 8 " c o v e r, u s e # 7 0 8 p a r t i t i o n
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Application
& COVERS
independent of the box (box must
still be used)
Product Features 800 803 902 907 801, 906
• For easy mounting, RACO® 811, 812
900 series covers include
additional hardware for mounting
the receptacle(s)
• RACO® 900 series covers meet
NEC Article 410-56(I) for mounting
the device with more than 810 813 808 814 915 809
one screw
• Hardware and cover are packed O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
in a poly-bag with printed catalog
number, compliances and installa-
tion instructions 4 " S Q UA R E S U R FA C E C O V E R S – R A I S E D 1 / 2 "
• Helpful Hint: Remove a portion of C ATA L O G DESCRIPTION CU. S T D. UPC
NUMBER IN. PKG. BAR CODE
the GFCI receptacle ear to mount
800 1 To g g l e s w i t c h , c r u s h e d c o r n e r s 5.8 25
device to 4" square cover
803 2 To g g l e s w i t c h e s 7.3 10
Compliances 902 1 Duplex receptacle, crushed corners 5.8 25
• ®
– File E195978 907 2 Duplex receptacles 7.3 25
• – File LR-1082 801 1 Receptacle 1.406" dia. 7.3 10
811 30A locking 1.719" dia. 7.3 10
812 20A Receptacle 1.594" dia. 7.3 10
906 1 Dup. & 1 toggle switch 7.3 10
810 30-50A Receptacle 2.141" dia. 7.3 10
813 30-60A Receptacle 2.625" dia. 7.3 10
808 1 GFCI 7.3 10
814 1 G F C I & 1 t o gg l e s w i t c h 7.3 10
915 1 GFCI & 1 duplex receptacle 7.3 10
809 2 GFCI 7.3 10
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Application
RACO STEEL BOXES
O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
DIMENSIONS
C ATA L O G A B C
NUMBER
201, 8201 1-1/2" — —
202 1-1/2" — —
203, 8203 1-1/2" — —
187 1-1/2" — —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
4-11/16" SQUARE BOXES
1-1/2" AND 2-1/8" DEEP
A33
Applications
& COVERS
larger- sized conductors or wiring
devices are needed and more
volume is required
245 246 247 257, 8257
• Drawn boxes are ideal for exposed
work applications (surface NEW
mounted wiring)
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box
258 259 265, 8265 254 266 BOX-LOC ®
along studs or joists
• See Box Selection section in the O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
front of this catalog for complete
description of bracket types
and features 4-11/16" SQUARE BOXES – 1-1/2" DEEP – DRAWN
WITH CONDUIT KO’S – 29.5 CUBIC INCHES
• Combination screw heads DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
provide for faster installation NUMBER
BRACKET & SIDES B OT T O M
PKG.
BAR
SETBACK C O N D. C O N D. CODE
• TKO® knockouts offer greater 245 — 12-1/2" 3-1/2" , 2-3/4" 25 —
flexibility with RACO® patented 246 — 10-3/4" 3-1/2" , 2-3/4" 25 —
combination 1/2" and 247 — 8-1/2", 4- 3/4" 3-1/2", 2-3/4" 25 —
3/4" knockout
• TKO® knockouts allow for 4-11/16" SQUARE BOXES – 2-1/8" DEEP – WELDED
design and installation flexibility WITH CONDUIT KO’S – 42.0 CUBIC INCHES
DESCRIPTION KNOCKOUTS UPC
Compliance C ATA L O G
BRACKET & SIDES B OT T O M
S T D.
BAR
NUMBER PKG.
• ®
– File E195978 SETBACK C O N D. C O N D. CODE
Applications
RACO STEEL BOXES
*5 Bundles of 10
4 - 1 1 / 1 6 " S Q U A R E C O M B I N AT I O N D E V I C E A N D T I L E C O V E R S – S I N G L E D E V I C E
C ATA L O G DESCRIPTION CU. S T D. UPC
NUMBER IN. PKG. BAR CODE
837 R a i s e d 1/ 2 " 3.5 25 —
843 R a i s e d 5/ 8 " 4.5 25 —
838 R a i s e d 3/ 4 " 5.5 25 —
839 Raised 1" 7.5 25 —
842 R a i s e d 1 - 1/ 4 " 9.5 25 —
898 R a i s e d 1 -1/ 2 " 11.0 20 —
899 Raised 2" 16.0 20 —
DIMENSIONS
C ATA L O G A B C
NUMBER
250 1-1/2" — —
262 2-1/8" — —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Applications
& COVERS
• Exposed work covers are used to
support switches or receptacles
independent of the box 818-820, 885 870RAC 972 979 887
840, 841
Product Features
• RACO® 900 series covers
meet NEC Article 410-56(f) for
mounting the device by more
than one screw
• RACO® 900 Series covers include
additional hardware needed for 888 878 856 857 858 959
mounting the device(s)
• Hardware and cover are packed O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
in a poly-bag printed with catalog
number, compliances and
4 - 1 1 / 1 6 " S Q U A R E C O M B I N AT I O N D E V I C E A N D T I L E C O V E R S – T W O D E V I C E
installation instructions
C ATA L O G DESCRIPTION CU. S T D. UPC
• Covers are available for mounting NUMBER IN. PKG. BAR CODE
one or two devices 841 R a i s e d 1/ 2 " 5.5 25
Compliances 818 Raised 5 / 8" 7.3 25 —
840 R a i s e d 3/ 4 " 8.8 25 —
• ®
– File E195978
819 Raised 1" 12.0 25 —
• – File LR-1082 820 Raised 1 -1/ 4" 15.0 25 —
885 Raised 1 -1/ 2" 15.5 20 —
* B o x e s , c o v e r s a n d p a r t i t i o n s m u s t b e o r d e r e d s e p a r at e l y
* F o r 2 - 1 / 8 " d e e p b o x w i t h 5 / 8 " c o v e r, u s e # 7 0 8 p a r t i t i o n
* P a r t i t i o n s a r e u s e ab l e , b u t n o t U L l i s t e d i n 4 - 1 1 / 1 6 " s q . b o x
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Applications
RACO STEEL BOXES
C ATA L O G A B C
NUMBER
650, 8650 1-1/2" — —
655 1-1/2" — —
660, 8660 1-7/8" — —
611 1-7/8" — —
663, 8663 1-7/8" — —
662 1-7/8" 7" 2-3/8"
661 1-7/8" 6-7/16" 2-11/32"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
HANDY BOXES & EXTENSIONS
1-1/2", 1-7/8" AND 2-1/8" DEEP
A37
Applications
& COVERS
outlets, switch boxes or small
junction boxes
670RAC, 8670 674 678 671
• They are popular for exposed
work applications (surface-
mounted wiring)
• The NEC requires that surface-
mounted wiring be enclosed
with a protective covering such
as EMT conduit
653 665 640 880
• Extension rings provide a
means for adding additional
cubic capacity or as an outlet
O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
box for surface conduit
Product Features
4" x 2" HANDY BOXES – 2-1/8" DEEP – WELDED
• RACO® offers a variety of labor WITH CONDUIT KO’S – 16.5 CUBIC INCHES
saving mounting brackets that C ATA L O G DESCRIPTION KNOCKOUTS S T D. UPC
allow for easy positioning of box NUMBER BRACKET & PKG. BAR
SETBACK SIDES ENDS B OT T O M CODE
along studs or joists
670RAC — 6-1/ 2" 2 - 1/ 2" 3-1/ 2" 50 —
• See Box Selection section in the 8670 — 6-1/ 2" 2 - 1/ 2" 3-1/ 2" 50
front of this catalog for complete 674 — 4 - 3/ 4 " 2 - 3/ 4 " 2 - 3/ 4 " 50
description of bracket types 678 TS brkt., 1/ 2" 3-1/ 2" 2 - 1/ 2" 3-1/ 2" 50
and features 671 A brkt., 5/ 8" 3-1/ 2" 2 - 1/ 2" 3-1/ 2" 50
Compliances
4" x 2" HANDY BOX EXTENSION – 1-1/2" DEEP – WELDED
• ®
– File E195978 WITH CONDUIT KO’S – 11.5 CUBIC INCHES
DESCRIPTION UPC
All RACO® single gang, two C ATA L O G
BRACKET &
KNOCKOUTS S T D.
BAR
NUMBER PKG.
gang, 4" square, and single SETBACK SIDES ENDS B OT T O M CODE
gang gangable U.L. listed steel 653 — 6-1/ 2" 2 - 1/ 2" — 25
boxes are acceptable for use
in 2-hour fire rated walls. For 4" x 2" HANDY BOX EXTENSION – 1-7/8" DEEP – DRAWN
additional information, consult WITH CONDUIT KO’S – 13.0 CUBIC INCHES
U.L. “Fire Resistance Directory” C ATA L O G DESCRIPTION KNOCKOUTS S T D. UPC
NUMBER BRACKET & PKG. BAR
or the U.L. website at www.ul.com SETBACK SIDES ENDS B OT T O M CODE
665 — 6-1/ 2" 2 - 1/ 2" — 50
STEEL HANDY BOXES
3-3/4" x 1-9/16" INDUSTRIAL HANDY BOX & COVER – 1-1/2" DEEP – DRAWN
WITH CONDUIT KO’S – 7.3 CUBIC INCHES
C ATA L O G DESCRIPTION KNOCKOUTS S T D. UPC
NUMBER BRACKET & PKG. BAR
SETBACK SIDES ENDS B OT T O M CODE
640 — 6-1/ 2" 2 - 1/ 2 " 3 - 1/ 2 " 50 —
880 B l a n k c o v e r & c ap t i v e s c r e w s — — — 50 —
DIMENSIONS
C ATA L O G A B C
NUMBER
670, 8670 2-1/8" — —
674 2-1/8" — —
678 2-1/8" 7" 2-3/8"
671 2-1/8" 7" 2-3/8"
653 1-1/2" — —
665 1-7/8" — —
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Applications
RACO STEEL BOXES
Application
& COVERS
1/4" paneling
Product Features
• Shallow boxes have a “D”
bracket that is scored, so
it may be broken off if needed
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the 404 405 418
front of this catalog for complete
description of bracket types and O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
features
Compliances
3-3/4" x 2" SWITCH BOXES – 1" DEEP – NONGANGABLE – WELDED
• ®
– File E195978 (Cat. #404 W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 6 . 5 C U B I C I N C H E S
and #405 not UL Listed C ATA L O G DESCRIPTION KNOCKOUTS
S T D. UPC
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
All RACO® single gang, two SETBACK C O N D. C A B L E C O N D. COND CODE
gang, 4" square, and single 404 Q clamp, 1/4" — 2 1-1/ 2" — 25
gang gangable U.L. listed steel 405 Q clamp, 1/4" — 4 — — 25
boxes are acceptable for use
in 2-hour fire rated walls. For 4" x 4" SWITCH BOX – 1" DEEP – NONGANGABLE – WELDED
additional information, consult W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 1 4 . 8 C U B I C I N C H E S
U.L. “Fire Resistance Directory” DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
BRACKET & SIDE ENDS B OT T O M BAR
or the U.L. website at www.ul.com NUMBER
SETBACK C O N D. COND
PKG.
CODE
C A B L E C O N D.
418 (2) Q clamp, 1/4" — 4 2 - 1/ 2" — 25
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Application
RACO STEEL BOXES
or outlets
Product Features
• Gangable switch boxes offer the
option of constructing a box to
hold two or more devices 400 410
• Plaster ears allow box to be used
in ”old work” applications
Compliances
• ®
– File E195978
420, 8420 445
All RACO® single gang, two
gang, 4" square, and single O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
gang gangable U.L. listed steel
boxes are acceptable for use
in 2-hour fire rated walls. For 3" x 2" SWITCH BOX – 1-1/2" DEEP – GANGABLE
WITH CONDUIT KO’S – 7.5 CUBIC INCHES
additional information, consult
U.L. “Fire Resistance Directory” C ATA L O G DESCRIPTION KNOCKOUTS S T D. UPC
NUMBER BRACKET & PKG. BAR
or the U.L. website at www.ul.com SETBACK SIDES ENDS B OT T O M CODE
400 Ears — 2 - 1/ 2 " 1-1/ 2" 20
& COVERS
or outlets
Product Features
• Gangable boxes offer the option
of constructing a box to hold 440 513 471, 8471
two or more devices
• Beveled corner boxes are
designed to prevent the clamp
screws from protruding into
back wall
• Plaster ears allow box to be used
473 487
in ”old work” applications
Compliances O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
• ®
– File E195978 (Cat. #513
not UL Listed) 3" x 2" SWITCH BOX – 2" DEEP – GANGABLE
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 0 . 0 C U B I C I N C H E S
All RACO single gang, two
®
DESCRIPTION KNOCKOUTS UPC
gang, 4" square, and single C ATA L O G S T D.
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
gang gangable U.L. listed steel SETBACK C O N D. C A B L E C O N D. COND CODE
boxes are acceptable for use 440 Ears — 4 — 1-1/ 2" 50 —
in 2-hour fire rated walls. For
additional information, consult 3" X 2" SWITCH BOX – 2-1/8" DEEP – NONGANGABLE – “SNAP IN CLIP”
U.L. “Fire Resistance Directory” “OLD WORK” WITH CONDUIT KO’S – 11.0 CUBIC INCHES
or the U.L. website at www.ul.com “ DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
NUMBER BRACKET & PKG. BAR
SETBACK SIDES ENDS B OT T O M CODE
STEEL SWITCH BOXES
O l d Wo r k W i t h S n a p I n
513 2-1/2" 1-1/2" 2-1/ 2" 24
Clips And Ears
DIMENSIONS
C ATA L O G A
NUMBER
440 2"
471, 8471 2-1/4"
473 2-1/4"
487 2-1/4"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Application
RACO STEEL BOXES
or outlets
Product Features
• RACO® offers a variety of labor 500, 503, 8500 501 504, 505, 8504
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the
front of this catalog for complete
ING
description of bracket types and COM ON
SO
features 502 506 509 508
• Gangable switch boxes offer
the option of constructing a box O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
to hold two or more devices
• Plaster ears allow the box to be 3" x 2" SWITCH BOXES – 2-1/2" DEEP – GANGABLE
used in “old work” applications WITH CONDUIT KO’S – 12.5 CUBIC INCHES
DESCRIPTION UPC
Compliances C ATA L O G
BRACKET &
KNOCKOUTS S T D.
BAR
NUMBER PKG.
• – File E195978 SETBACK SIDES ENDS B OT T O M CODE
®
Application
& COVERS
or outlets
Product Features
• RACO® offers a variety of labor 519, 8519 528, 8528 531, 8531 540 529
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the
front of this catalog for complete
ING
description of bracket types and COM ON
SO
features 517 512 596 545
• Gangable switch boxes offer the
option of constructing a box to O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
hold two or more devices
• Plaster ears allow box to be used 3" x 2" SWITCH BOXES – 2-1/2" DEEP – GANGABLE
in “old work” applications W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 1 2 . 5 C U B I C I N C H E S
Compliances C ATA L O G DESCRIPTION KNOCKOUTS
S T D. UPC
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
• ®
– File E195978 SETBACK C O N D. C A B L E C O N D. COND CODE
519 Ears — 4 — 1 - 1/ 2 " 50 —
All RACO® single gang, two
8519 Ears — 4 — 1 - 1/ 2 " 50
gang, 4" square, and single
528 Level bumps — 4 2 - 1/ 2 " 1 - 1/ 2 " 50 —
gang gangable U.L. listed steel
8528 Level bumps — 4 2 - 1/ 2 " 1 - 1/ 2 " 50
boxes are acceptable for use
531 T S b r k t . , 1/ 2 " — 4 2 - 1/ 2 " 1 - 1/ 2 " 50 —
in 2-hour fire rated walls. For
8531 T S b r k t . , 1/ 2 " — 4 2 - 1/ 2 " 1 - 1/ 2 " 50
additional information, consult
540 B b r k t . , 1/ 4 " — 4 2 - 1/ 2 " 1 - 1/ 2 " 50 —
U.L. “Fire Resistance Directory”
529 Long brkt., 5/ 8" — 4 2 - 1/ 2 " 1 - 1/ 2 " 50
or the U.L. website at www.ul.com
517 O l d w o r k , Ti g e r g r i p 4 — — 1 - 1/ 2 " 20
512 Old work 4 — — 1 - 1/ 2 " 20
Application
RACO STEEL BOXES
or outlets
Product Features
• RACO® offers a variety of labor 518, 8518 524, 8524 522, 8522
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the
front of this catalog for complete
description of bracket types and
features 523, 8523 526
• Gangable switch boxes offer the
option of constructing a box to O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
hold two or more devices
• Plaster ears allow box to be used 3" x 2" SWITCH BOXES – 2-1/2" DEEP – GANGABLE
in “old work” applications W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 2 . 5 C U B I C I N C H E S
Compliances C ATA L O G DESCRIPTION KNOCKOUTS
S T D. UPC
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
• ®
– File E195978 SETBACK C O N D. C A B L E C O N D. COND CODE
518 Ears — 4 — 1 - 1/ 2 " 50 —
All RACO® single gang, two
8518 Ears — 4 — 1 - 1/ 2 " 50
gang 4" square, and single gang
524 T S b r k t . , 1/ 2 " — 4 2 - 1/ 2 " 1 - 1/ 2 " 50 —
gangable boxes U.L. listed steel
8524 T S b r k t . , 1/ 2 " — 4 2 - 1/ 2 " 1 - 1/ 2 " 50
boxes are acceptable for use in
522 Long B, 5/ 8" — 4 2 - 1/ 2 " 1 - 1/ 2 " 50 —
2-hour fire rated walls. For additional
8522 Long B, 5/ 8" — 4 2 - 1/ 2 " 1 - 1/ 2 " 50
information, consult U.L. “Fire
523 Old work, Griptite — 4 — 1 - 1/ 2 " 50 —
Resistance Directory” or the
8523 Old work, Griptite — 4 — 1 - 1/ 2 " 50
U.L. website at www.ul.com
STEEL SWITCH BOXES 3" x 2" SWITCH BOX – 2-1/2" DEEP – NONGANGABLE
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 2 . 5 C U B I C I N C H E S
DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
SETBACK C O N D. C A B L E C O N D. COND CODE
526 Old work — 4 — — 20
DIMENSIONS
C ATA L O G A B C
NUMBER
518, 8518 2-1/2" — —
524, 8524 2-1/2" 7-5/32" 2-5/16"
522, 8522 2-1/2" 13-1/32" 5-3/64"
526 2-1/2" 1-3/8" 3-13/32"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
SWITCH BOXES
SINGLE-GANG – 2-3/4" AND 2-27/32" DEEP
A45
Application
& COVERS
or outlets
Product Features
• RACO® 353, 355 and 8355 are
extra-wide for ease of GFCI
device installation
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the 353 355, 8355 560, 565, 8560 561 562
front of this catalog for complete
description of bracket types O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
and features
• Plaster ears allow the box to be
3" x 2-1/8" SWITCH BOX – 2-27/32" DEEP – NONGANGABLE
used in “old work” applications W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 5 . 8 C U B I C I N C H E S
Compliances C ATA L O G DESCRIPTION KNOCKOUTS
S T D. UPC
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
• ®
– File E195978 SETBACK C O N D. C A B L E C O N D. COND CODE
353 S brkt., nails — 4 — 1 - 1/ 2 " 50
All RACO® single gang, two
gang, 4" square, and single
gang gangable U.L. listed steel 3" x 2-1/8" SWITCH BOX – 2-27/32" DEEP – NONGANGABLE
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 1 5 . 8 C U B I C I N C H E S
boxes are acceptable for use
in 2-hour fire rated walls. For DESCRIPTION KNOCKOUTS UPC
C ATA L O G S T D.
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
additional information, consult SETBACK C O N D. C A B L E C O N D. COND CODE
U.L. “Fire Resistance Directory” 355 S brkt., nails — 4 — 1 - 1/ 2 " 50 —
or the U.L. website at www.ul.com 8355 S brkt., nails — 4 — 1 - 1/ 2 " 20
CAT. NO. 353, 355, 8355 3" x 2" SWITCH BOXES – 2-3/4" DEEP – GANGABLE
WITH CONDUIT KO’S – 14.0 CUBIC INCHES
C ATA L O G DESCRIPTION KNOCKOUTS S T D. UPC
NUMBER BRACKET & PKG. BAR
SETBACK SIDES ENDS B OT T O M CODE
560 Ears 4 - 1/ 2 " 2 - 1/ 2 " 2 - 1/ 2 " 50 —
8560 Ears 4 - 1/ 2 " 2 - 1/ 2 " 2 - 1/ 2 " 50
565 Ears 4 - 1/ 2 " 2 - 3/ 4" 2 - 1/ 2 " 50 —
561 Without ears 4 - 1/ 2 " 2 - 1/ 2 " 2 - 1/ 2 " 50 —
562 T S b r k t . , 1/ 2 " 2 - 1/ 2 " 2 - 1/ 2 " 2 - 1/ 2 " 50 —
STEEL SWITCH BOXES
DIMENSIONS
C ATA L O G A B C
NUMBER
560, 8560 2-3/4" — —
565 2-3/4" — —
562 2-3/4" 7-5/32" 2-5/16"
561 2-3/4" 7-5/32" 2-5/16"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Application
RACO STEEL BOXES
or outlets
Product Features
• RACO® offers a variety of labor 567 564 570RAC
saving mounting brackets that
allow for easy positioning of box
along studs or joists
• See Box Selection section in the
front of this catalog for complete
description of bracket types
and features 574 590, 591, 8590 592
• Plaster ears allow the box to be
used in “old work” applications O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
Compliances
• ®
– File E195978 3" x 2" SWITCH BOXES – 2-3/4" DEEP – GANGABLE
W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 1 4 . 0 C U B I C I N C H E S
All RACO single gang, two
®
Application
& COVERS
or outlets
Product Features
• RACO® offers a variety of labor 601, 8601 605 603
saving mounting brackets that
allow for easy positioning of
box along studs or joists
• See Box Selection section in the
front of this catalog for complete
description of bracket types
and features 600 604, 8604
• Gangable switch boxes offer the
option of constructing a box to O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
hold two or more devices
• Plaster ears allow the box to be
3" x 2" SWITCH BOXES – 3-1/2" DEEP – GANGABLE
used in ”old work” applications W I T H N O N M E TA L L I C S H E AT H E D C A B L E C L A M P S – 1 8 . 0 C U B I C I N C H E S
Compliances C ATA L O G DESCRIPTION KNOCKOUTS
S T D. UPC
NUMBER BRACKET & SIDE ENDS B OT T O M PKG. BAR
• ®
– File E195978 SETBACK C O N D. C A B L E C O N D. COND CODE
601 Ears 4 - 1/ 2 " 4 2 - 1/ 2 " 1 - 1/ 2 " 25 —
All RACO® single gang, two
8601 Ears 4 - 1/ 2 " 4 2 - 1/ 2 " 1 - 1/ 2 " 25
gang, 4" square, and single
605 T S b r k t . , 1/ 2 " 4 - 1/ 2 " 4 2 - 1/ 2 " 1 - 1/ 2 " 25
gang gangable U.L. listed steel
603 B brkt., 5/ 8" 4 - 1/ 2 " 4 2 - 1/ 2 " 1 - 1/ 2 " 25 —
boxes are acceptable for use
in 2-hour fire rated walls. For
additional information, consult 3" x 2" SWITCH BOXES – 3-1/2" DEEP – GANGABLE
W I T H A R M O R E D C A B L E / M E TA L C L A D / F L E X C L A M P S – 1 8 . 0 C U B I C I N C H E S
U.L. “Fire Resistance Directory”
DESCRIPTION KNOCKOUTS UPC
or the U.L. website at www.ul.com C ATA L O G
BRACKET & SIDE ENDS B OT T O M
S T D.
BAR
NUMBER PKG.
SETBACK C O N D. C A B L E C O N D. COND CODE
600 Ears 4 - 1/ 2 " 4 2 - 1/ 2 " 1 - 1/ 2 " 25 —
604 T S b r k t . , 1/ 2 " 4 - 1/ 2 " 4 2 - 1/ 2 " 1 - 1/ 2 " 25 —
8604 T S b r k t . , 1/ 2 " 4 - 1/ 2 " 4 2 - 1/ 2 " 1 - 1/ 2 " 25
Applications
RACO STEEL BOXES
switch boxes
• These larger capacity boxes are
ideal for today’s designs where 680 683 681 685
there is a need to install two
devices at one location
• Drawn boxes are ideal for exposed
work applications (surface
mounted wiring)
Product Features
• 681, 685 bracketed boxes are set 871 872 873
back 1/2" eliminating the need for
a plaster ring O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
• RACO® offers a variety of labor
saving mounting brackets that 4" SQUARE TWO DEVICE SWITCH BOX – 2-1/8" DEEP – DRAWN
allow for easy positioning of box WITH CONDUIT KO’S – 30.3 CUBIC INCHES
along studs or joists DESCRIPTION KNOCKOUTS UPC
C ATA L O G BRACKET & S T D. BAR
• See Box Selection section in the SIDES B OT T O M
NUMBER SETBACK C O N D. C O N D. PKG. CODE
front of this catalog for complete
680 — 12-1/ 2" 5-1/ 2" 25
description of bracket types
683 — 8 - 1 / 2 " , 4 - 3/ 4 " 3 - 1 / 2 " , 2 - 3/ 4 " 25
and features
681 TS brkt., 1/ 2" 9-1/ 2" 5-1/ 2" 25
• Covers are unpainted and manu- 685 TS brkt., 1/ 2" 6 - 3/ 4 " 3 - 1 / 2 " , 2 - 3/ 4 " 25
factured from pre-galvanized steel
Compliances 4 " S Q U A R E – T W O - D E V I C E WA L L P L AT E S *
• ®
– File E195978 C ATA L O G DESCRIPTION S T D. UPC
NUMBER PKG. BAR CODE
All RACO single gang, two
®
871 2 To g g l e s w i t c h e s 25
gang, 4" square, and single 872 1 D u p . & 1 To g g l e s w i t c h 25
gang gangable U.L. listed steel 873 2 Duplex receptacles 25
boxes are acceptable for use
in 2-hour fire rated walls. For *Cover face surface is 1/4" from wall when installed
additional information, consult
U.L. “Fire Resistance Directory” DIMENSIONS
or the U.L. website at www.ul.com C ATA L O G A B C D E
NUMBER
TWO-GANG SWITCH BOXES 680 4" 4" 2-1/8" — —
683 4" 4" 2-1/8" — —
681 4" 4" 2-1/8" 7" 4-9/32"
685 4" 4" 2-1/8" 7" 4-9/32"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
SWITCH BOXES
M U LT I - G A N G – 2 - 1 / 2 " D E E P
A49
Applications
& COVERS
multi-gang switch boxes
• These larger capacity boxes are
ideal for today’s designs where
there is a need to install more than
two devices at one location
Product Features
• RACO® offers a variety of labor
saving mounting brackets that
allow for easy positioning of box
along studs or joists 686 687 971
• See Box Selection section in the
front of this catalog for complete O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
description of bracket types and
features
M U LT I - D E V I C E S W I T C H B O X E S – 2 - 1 / 2 " D E E P – W E L D E D
Compliance WITH CONDUIT KO’S
DESCRIPTION UPC
• ®
– File E195978 (Cat. #971 C ATA L O G
BRACKET &
KNOCKOUTS C U . I N . S T D. BAR
NUMBER C A P. PKG.
not UL Listed) SETBACK SIDES ENDS B OT T O M CODE
3-Gang
686 2-1/ 2", 2-3/4" 6- 1/ 2", 6-3/4" 3- 1/ 2", 3- 3/4" 47.8 10
1/2" setback
4-Gang
687 2-1/ 2", 2-3/4" 8- 1/ 2", 8-3/4" 4- 1/ 2", 4- 3/4" 63.5 10
1/2" setback
Low voltage
971 — — — — 25 —
partition
A50 G A N G B O X E S , PA R T I T I O N S A N D C O V E R S
1-5/8" AND 2-1/2" DEEP
Application
RACO STEEL BOXES
G A N G B O X E S , PA R T I T I O N S A N D C O V E R S
A51
Application
& COVERS
Product Feature
• Device covers also fit next smaller
box, i.e. three-gang cover fits
two- or three-gang box
Compliance
• ®
– File E195978 (Cat. #974
and 949 not UL Listed)
O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
F L A T, B L A N K C O V E R S F O R G A N G B O X E S
C ATA L O G N O. O F WIDTH CU. S T D. UPC
NUMBER GANGS IN. PKG. BAR CODE
844 2 7 - 1/ 1 6 " — 5 —
845 3 8 - 7/ 8 " — 5 —
846 4 10 -11/ 16" — 5 —
847 5 1 2 - 1/ 2 " — 1 —
848 6 1 4 - 5/ 1 6 " — 1 —
849 7 1 6 - 1/ 8 " — 1 —
850 8 1 7 - 15/ 1 6 " — 1 —
851 9 1 9 - 3/ 4 " — 1 —
L O W V O LT A G E P A R T I T I O N F O R G A N G B O X E S
C ATA L O G DESCRIPTION S T D. UPC
NUMBER PKG. BAR CODE
974 For 1-5/8” Deep 25 —
949 For 2-1/2” Deep 25 —
NEW
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Applications
RACO STEEL BOXES
construction
• These boxes are installed on
wooden or steel concrete forms. 273, 274, 275, 284 *280 SHOWN
After the forms are removed, the 276, 279 GORILLA-RING ™ WITH 918 BARS
box is flush with the concrete
• RACO® Ceiling Fan Concrete
Ring 284 is listed for support
of ceiling fans
Product Features
• Flat sides provide excellent 890 891 892 893
contact for locknuts
• External ears are used to nail O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
the ring to the wood form
• The top cover is removable CONCRETE RINGS
for before-pour work MAX. RECOMMENDED
• Ears on inside of box are S U P P O R T L OA D S
C ATA L O G N O. CU. S T D. UPC
DEPTH KO SIZES C E I L I N G FA N F I X T U R E
for fixtures NUMBER ROWS KO’s IN. PKG. BAR CODE
( DY N A M I C ) ( S TAT I C )
• Waxed fixture ears prevent LBS. LBS.
concrete from interfering with 270RAC 2" 1/ 2 " & 3 / 4 " Single 24.5 25 — No 50
the threads 271 2 -1/ 2 " 1/ 2 " & 3 / 4 " Single 30.8 25 — No 50
272 3" 1/ 2 " & 3 / 4 " Single 37.0 25 — No 50
• Variety of cover plates
277 3" 3/ 4" & 1" Single 37.0 25 — No 50
are available
273 3 -1/ 2 " 1/ 2 " & 3 / 4 " Double 43.0 20 — No 50
• Cover plate must be ordered 278 3 -1/ 2 " 3 / 4 " & 1 " Single 43.0 20 — No 50
separately with all (except 280 274 4" 1/ 2 " & 3 / 4 " Double 49.3 20 — No 50
which includes a 891 cover) 279 4" 3/ 4" & 1" Double 49.3 20 — No 50
RACO® concrete rings 275 5" 1/ 2 " & 3 / 4 " Double 61.5 10 — No 50
Compliance 276 6" 1/ 2 " & 3 / 4 " Double 74.0 10 — No 50
284 4" 1/ 2 " & 3 / 4 " Double 49.3 6 — 35 75
• ®
– File E195978
* O r d e r b a r s s e p a r at e l y
K N O C K O U T L O C AT I O N S
KNOCKOUT A B
SIZE
1/2" and 3/4" KOs 1/2" 3/4"
3/4" and 1" KOs 3/4" 1"
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
M A S O N RY B O X E S
2-1/2" AND 3-1/2" DEEP
A53
Applications
& COVERS
switches or other devices in
masonry walls
• 2-1/2" deep box is used 692
690 691
on 4" block
• 3-1/2" deep box is used
on 6" and 8" block
Product Features
• Rugged welded construction does
not fall apart during construction
695, 8695 696 697 971
• Available from one- to six-gang
in 2-1/2" or 3-1/2" depths
• Rectangular shape fits square O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
cuts in block
• Have 1/2" and 3/4" concentric MASONRY BOXES – 2-1/2" DEEP – NONGANGABLE
WITH CONDUIT KO’S
KO’s for use with a wide variety UPC
KNOCKOUTS
of wiring methods C ATA L O G N O. O F
WIDTH
CU. S T D. BAR
NUMBER GANGS ENDS B OT T O M IN. PKG. CODE
• Large volume design allows
690 1 1-3 1/ 3 2" 2 2 16.0 25 —
for additional work room inside
691 2 3 -2 5/ 3 2" 4 4 31.8 25 —
the box
692 3 5 -19/ 3 2" 6 3 47.8 10 —
• Device ears are formed inside 693 4 7 -13/ 3 2" 8 4 63.5 10 —
the box, preventing mortar from 694 5 9 - 7/ 3 2 " 10 5 79.5 10 —
getting in the device holes 960 6 11 1 / 3 2 " 12 6 95.3 1 —
• Low voltage partition 971 will
fit all 2-1/2" or 3-1/2" depths MASONRY BOXES – 3-1/2" DEEP – NONGANGABLE
WITH CONDUIT KO’S
• Standard wall plates cover UPC
KNOCKOUTS
the box C ATA L O G N O. O F
WIDTH
CU. S T D. BAR
NUMBER GANGS ENDS B OT T O M IN. PKG. CODE
Compliance
695 1 1-3 1/ 3 2" 4 2 22.5 25 —
• ®
– File E195978 (Cat. #971 8695 1 1-3 1/ 3 2" 4 2 22.5 25
not UL Listed) 696 2 3 -2 5/ 3 2" 8 4 45.0 10
697 3 5 -1 9/ 3 2" 12 3 67.3 10
698 4 7 -13/ 3 2" 16 4 89.8 10 —
699 5 9 - 7/ 3 2 " 20 5 112.3 10 —
965 6 1- 1 1 / 3 2 " 24 6 134.8 1 —
L O W V O LT A G E P A R T I T I O N F O R M A S O N R Y B O X E S
C ATA L O G DESCRIPTION S T D. UPC
NUMBER PKG. BAR CODE
971 F o r 2 - 1/ 2 " o r 3 -1/ 2 " d e e p b o x e s — 25
Application
RACO STEEL BOXES
& COVERS
Far Side Box Support Features
• Snaps into hole in back of box
• Easy to cut to fit depth of cavity
BOX-LOC® Application
• Allows any box to be attached to
either side of a metal stud quickly
and easily
BOX-LOC® Product Features
978 BOX-LOC®
• Patented spring steel design INSTALLED 978
980
• Installs in seconds without tools
• Mounts on either side of stud O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
• Repositions easily
• Bracket may be added to any B O X - L O C ® M E TA L S T U D C L I P
RACO® 4" or 4-11/16" square steel C ATA L O G S T D. UPC
DESCRIPTION
box — simply tap the bracket NUMBER PKG. BAR CODE
with a hammer and the barbed 980 Spring-steel bracket 50
hooks hold it in place
• BOX-LOC® also fits RACO® 7220 FA R S I D E B O X S U P P O RT
and 7232, 4" square PVC boxes C ATA L O G S T D. UPC
DESCRIPTION
NUMBER PKG. BAR CODE
• BOX-LOC is a snap to install.
®
Adjust-A-BraceTM Application
RACO STEEL BOXES
• Adjust-A-BraceTM is used to
mount electrical outlet boxes
& COVERS
between studs
Adjust-A-BraceTM ADJUST-A-BRACETM
Product Features 985
Plaster Ears -
963 1 Screw Style w/screws 471, 487, 517, 518, 519, 523 100
O l d Wo r k G r i p t i t e C l i p
964 w/screws 523 100
O l d Wo r k Ti g e r g r i p C l i p
966 w/screws 487, 506, 517 100
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Grounding Applications
& COVERS
to help prevent shock
NEW NEW NEW
• Grounding screws thread into 982, 994 996, 8996-1 984, 997
the box and provide a means of #14 WIRE 8983-1, 983 #14 WIRE
fastening the ground conductor #12 WIRE
• Ground wires fasten to the box
and are then connected to wiring
system or wiring device
• RACO® 6" and 8" ground
pigtails feature 4-way (slotted, 998, 973, 975,
992 993 NEW
phillips, hex-head) combo 10-32 #14 WIRE #12 WIRE 8998-1 8973-1 8975-1
captive screw
• Ground clips provide a quick O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
method of fastening a ground
conductor to the edge of a steel
outlet box G R O U N D I N G P I G TA I L S
C ATA L O G
• Ground clips are designed for NUMBER S T D. UPC
use with solid No. 14, 12, and WIRE LENGTH DESCRIPTION PKG. BAR
6" 8" CODE
10 gauge copper conductor
or No. 12 and 10 gauge # 1 4 S o l i d i n s u l at e d c o p p e r w i r e , c a p t i v e 4 - w a y c o m b o
982 994 h e a d g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d ( 2 5 p c . b u n d l e s ) 1000 —
aluminum conductor
# 1 2 S o l i d i n s u l at e d c o p p e r w i r e , c a p t i v e 4 - w a y c o m b o
• Only one solid ground wire 983 996 h e a d g r e e n d y e f i n i s h gr o u n d s c r e w o n e e n d ( 2 5 p c . b u n d l e s ) 1000 —
8998-1 4 - Wa y c o m b o h e a d gr e e n d y e f i n i s h gr o u n d s c r e w f o r 1 0 - 3 2 50 bags*
tapped hole, poly bag (10 pcs. per bag)
S l o t t e d h e a d gr e e n d y e f i n i s h gr o u n d s c r e w f o r 1 0 - 3 2 t a p p e d
973 h o l e , c l a m s h e l l p a c k ag e ( 1 0 0 p c s p e r c l a m s h e l l ) 1000
8973-1 S l o t t e d h e a d gr e e n d y e f i n i s h gr o u n d s c r e w f o r 1 0 - 3 2 t a p p e d 50 bags*
hole, poly bag (10 pcs. per bag)
G r e e n d y e f i n i s h gr o u n d c l i p f o r # 1 4 - # 1 0 AW G c o p p e r,
975 c l a m s h e l l p a c k ag e ( 1 0 0 p c s p e r c l a m s h e l l ) 1000
G r e e n d y e f i n i s h gr o u n d c l i p f o r # 1 4 - # 1 0 AW G c o p p e r, p o l y b a g
8975-1 50 bags*
(10 pcs. per bag)
* O r d e r s t a n d a r d p a c k ag e b a g q u a n t i t i e s o n ly, n o t p e r p i e c e
Order from Cuny & Guerber Inc., 2100 Kerrigan Ave., Union City, NJ 07087 USA Phone: 201-617-5800 email: sales@cuny.biz web: http://www.cuny.biz
Add-A-Depth Applications
RACO STEEL BOXES
Applications
& COVERS
where electrical boxes are
positioned back to back or less
than 24" apart in wall cavities
• The 1999 UL Fire Resistance
Directory (Orange Book) mandates
that “metallic boxes located on
opposite sides of walls or partitions
shall be separated by a minimum
horizontal distance of 24 inches.
This separation distance between
metallic boxes may be reduced 903 904 905
when Wall Opening Protective
Materials (CLIV) are installed with O R D E R I N G I N F O R M AT I O N - D I M E N S I O N S
the metallic boxes”
Internal/Insert Pad • Only one pad is required for Compliance
Product Features a 1 or 2 hour fire rating • ®
A60 S U R FA C E M O U N T B O X E S
4" SQUARE, 4-11/16" SQUARE, HANDY BOXES
ING
COM ON
SO
Applications
RACO STEEL BOXES