Professional Documents
Culture Documents
GPS-WAAS
Receiver
PRECISE PERFORMANCE.
PROVEN EXPERIENCE.
PERSONALIZED ATTENTION.
GPS-WAAS Receiver
A Global Positioning Receiver (GPS) combined with the unparalleled accuracy and integrity monitoring
of Wide Area Augmentation System (WAAS)
GPS-WAAS Specifications approach COM Ports: RS232, 19,200 bps
GPS Type: C/A code Sensor with Alert: lert in the form of
A
WAAS capability Main Connector
data available as per Type: MIL-C 38999 Souriau
DO-229D PN: 8D0C-13F35PN
Conformity: DO-229D
DO-254, Level-B Integrity
DO-178B, Level-B Airframe Side: S
ouriau PN: 8D5-
DO-160E Monitoring: SBAS integrity (if 13F35SN
ARINC 743A-4 available), FD and
FDE RAIM, Predictive
RAIM, all as per DO- Antenna Connector
Certification: TSO-C145b Class 229D Type: Amphenol TNC
Beta 3: LPV
BITE:
Power-on Self Test Thermal Protection: Internal
Frequency: 1575.42 MHz and Online BITE thermal
regulation and
monitoring
No. of Communication: Input Voltage: Nominal 14 to 28V,
Channels:
Total: 15 (GPS: 12 RS-232: dual bus
WAAS: 3) One host port, 19.2
kbps Maximum
One maintenance Input Voltage: Spikes to 80V
Architecture: Digital Signal port 19.2 kbps
Processor Minimum
with FPGA and Input discrete: Input Voltage: Down to 10V for 30
RF Front-end Air/ground, self test, seconds
data load, master
Measurement reset
Accuracy: Receiver noise per
DO-229D Output discrete: Size:
1.4”H x 2.6”W x 4.0”D
Fail navigation, fault (excluding connectors and
discrete, power fail mounting flange)
Time: 100 ns, Synchronized
to either GPS or
UTC (SA off) Software protocol: Weight: 0.95 lbs.
Binary, proprietary
Sensitivity: Acquisition: -136 dBm Software Enclosure:
Tracking: -140 dBm Upgrade: Field upgradeable Machined 6061-T6 aluminum
genesys-aerosystems.com
1-817-215-7600
One S-TEC Way, Mineral Wells, TX 76067 USA