Series
270-300-350
Series 560
PAINTED STEEL Fixed
Resistant with the corrosion: oll the components ore painted (painting with epoxy powder coating, thickness
nin, 0p}, oF finished wih gelvani
irealmert, ideul to work externally.
Easy to install everywhere, like for example on the wall, onthe floor, on the ceiling and on the vehicles.
Fluid - Pr PAINTED STEEL ‘STAINLESS STEEL AIS! 304.
‘Swivel joint Seals Central shaft Swivel joint Seals Central shaft
560 ‘Woter mex 130°C 200 bar AIS! 304 Viton steel AIS! 304 Viton AIS! 304
‘Water max 130°C 400 bar AIS! 304 ‘Talon ‘steel AIS! 304 Teflon AISI 304
USES.
:@acooons Water max 130°C 100 bar
[NEDPANTED STEEL FRED'S SRELASaDK Spe! wi
For the SWIVELLING hose in black synthetic rubber with galvanized
version add the steal coupling
suffix “/SO"at the (Cg ~ AISI 304 stainless stool swivel joint >
PIN, except (Ge Viton” seals
for the 560 series. Spd) _-contal shaft in galvanized sto! or stanoss stool AlSI 304
For example: FF ret hose 0,6 m to connect the hose real tothe
30/20/50 system (standard on the versions with hota}
300/20 302/40 without hose Fz F3/8"- 1/26
s. 300 300/21 302/21 V2m 3/8" 953/13] FRG M3/8G
300/22 302/22 8m 1/2" (63/8) Fiz M26
350/20 352/40 without hose™ F 26 F3/8*. 1/26
5.350 350/21 352/21 17m 3/6" 1953/18) FG M376
350/22 352/22 12m 3/8" 953/13} FU2G M3/8G
350/23 352/23 TO 1/2° (96379) Fi26 M26
430/20 434/20 without hose* Fe F26
5.430 430/21 432/21 VOm 1/2" 963/12) | __~F/2"G M126
430/22 432/22 15m 1/2" 963/14) FU2G M1726
4430/20 4434/20 without hose* £26 F126
4430/22 4432/22 15m 1/2" (963/14) Fi26 MBG
530/20 534/20 without hose* F26 F126
530/21 592/21 20m 1/2" (963/19) FU2G M26
530/22 332/22 25m 1/2" (963/24) F2G M26
40/20 544/20 without hose* fad FG.
540/21" 42/21" 15m 1" (983/15) FRG MPG.
avez 3aL/EE Tom 3/4 75/14) Fre, Ms/eG
$540 540/23 542/23 20m 3/4" 973/19) FPG M3/8G
540/25 54/25 ‘who hese” Fes F126
‘540/26 542/28 30m 1/2" (963/29) FUG M26
560/20, 564/20 without hose” as =
60/21 562/21 30m 3/4” (973/29) FNS M3/0G
560/22 562/22 35m 3/4" (973/34) FRG M3/4"G
560/23 562/23 40m 3/4" (973/39) FPG M3/0G
560/24" 302/24" 20m 1" (983/19) FPG: MTG.
= 500/25" 502/25" 30m 17 (983/29) FTG MIG
560/26 564/26 without hase” Fi@6 26
560/27 562/27 40m 1/2" (963/39) | _FV2°6 M26
560/28 562/28 50m 1/2° (963/49) FG M126
560/29 562/28 60m 1/2" (963/59) FUG M126
Rubber handles, mounted on hose leminal pat, are available for al he above series. For more information look at page $0,
++ Work max pressure 50 bar, hose max working presure 88 bar
+ For the version without hose the maximum working pressure is 150 bor
IL 3GD c X only for series 300-350-4430 ABS)
& Atex 94/9 | WB 2GD ¢ Td TI35°C X