Professional Documents
Culture Documents
Ex 600
Ex 600
(For Input/Output)
®
RoHS
Compatible Protocols
Handheld
Terminal
9
Max. Units Note)
Can be connected in any order.
The Input Unit to connect input device such as
an auto switch, pressure switch and flow
switch, and the Output Unit to connect output
device such as a solenoid valve, relay and
indicator light can be connected in any order.
Note) Except SI Unit
Series EX600
CAT.E02-24E A
Series EX600 Configurations
Analog Unit SI Unit
M12 connector (5 pins) Input device
Dual port EtherNet/IPTM product
Input added to compatible
Unit
2CH communication networks
P.9
Output
Unit
2CH Pressure
sensor New
Flow sensor
Input/
Output 2CH/
Unit 2CH Output device
IP67
Handheld Terminal
Parameter setting and
I/O monitor tool P.16
IP67 IP67 Electro-pneumatic regulator etc.
Power
supply
End
Plate Digital Unit Analog Unit SI Unit
Digital Unit
M12 connector (5 pins) M8 connector (3 pins) D-sub connector Spring type terminal block
Input
Unit 8 inputs 16 inputs 8 inputs 16 inputs 16 inputs
Output
Unit 8 outputs 16 outputs 16 outputs
Input/
Output 8 inputs/ 8 inputs/
Unit 8 outputs 8 outputs
Pressure switch
1
SI Unit
Unit to connect various
Fieldbus with the EX600
EX600
system
• How to Order P. 9
• Specifications P. 11, 12
Series
• Parts Description P. 17
• Dimensions P. 19
Series SY (IP67)
Digital Unit
Unit to input or output digital
(switch) signals
SY
• How to Order P. 9
P.27 • Specifications P. 13, 14
Series
• Parts Description P. 18
• Dimensions P. 20
SV
valves
®
Series
• How to Order P. 10
• Specifications P. 15, 16
• Parts Description P. 18
• Dimensions P. 20
S0700
End Plate
P.39
Unit to supply power to the
Series
EX600 system
• How to Order P. 10
• Specifications P. 16
Series S0700 (IP40) • Parts Description P. 18
VQC
• Dimensions P. 19
Series
Handheld Terminal
P.47 Parameter setting and I/O
monitor tool
• How to Order P. 10
• Specifications P. 16
• Parts Description P. 17
Series VQC (IP67) • Dimensions P. 19
Accessories
Options including a power supply cable
etc. for the EX600 series
P.51
P. 21
EtherNet/IPTM
Switching hub
EX600-SEN3/4 The new dualport product (EX600-SEN3/4) is available for both the
linear and device level ring topologies, in addition to the star type.
PLC PLC
Switching hub
is not required. Ring supervisor ∗
In the device level ring type, even though the communication cable is disconnected in one location, EtherNet/IPTM
communication can be continued, and the disconnected portion can be specified by the ring supervisor.
PLC PLC
Disconnected location
Normal flow of data Data flow when the communication cable is disconnected
3
QuickConnectTM Function Available
EX600
From Power ON to communication
connection
Approx. In the case of a tool changer, it takes about 10 seconds for the
Series
0.5 sec.
communication to be connected in common EtherNet/IPTM products, after
10 sec. the power of the device installed on the tool is turned ON.
Since the QuickConnectTM function∗ is available in the EX600-SEN3/4, the
communication can be connected in about 0.5 seconds.
SY
communication connection time
to the EtherNet/IPTM.
∗ To use the QuickConnectTM function, the PLC
Series
should be able to support the QuickConnectTM
function.
SV
Series
Tool 2 Tool 3
EX600
S0700
Robot arm
Series
Tool 1 EX600 EX600
VQC
Series
Built-in Web Server Function
The EX600-SEN3/4 has a built-in web server function, which enables status checks, parameter settings and
forced output of the EX600 using general-purpose web browsers, such as Internet Explorer. Start-up of the
system and maintenance can be performed efficiently.
PLC
EX600 q to e
can be accessed
via a web browser.
EtherNet/IPTM
Switching hub
Status check
Parameter setting
EX600 q EX600 w EX600 e Forced output, etc.
Connection example
4
Fieldbus System EX600
D-sub Connector IP40 Spring Type Terminal Block IP40
These Units are capable of connection using a D- These Terminal Block Units are compatible with in-
sub connector. There are three types of Units, for dividual wiring configurations. There are three types
Digital Input, Output, and Input/Output. The Digital of Units, for Digital Input, Output, and Input/Output.
Output Unit can be connected with an SMC manifold Wiring connection to a sensor connector box, etc.,
solenoid valve F kit (D-sub connector). can be carried out easily using only a flat head
Manifold solenoid valve can be connected screwdriver.
using cable with D-sub connector.
• Series SY • Series S0700 • Series SJ • Series SQ
• Series SV • Series VQC • Series VQ
∗ Please limit the number of valve connections to 16 stations for single
and 8 stations for double. Refer to the catalog for each product for pin
assignment details.
Pressure
sensor
(PSE series)
Pressure controller
(Electro-Pneumatic
Actuator Regulator/ITV series)
Inlet
Auto switch pressure
side Outlet
pressure
side
5
EX600
Series
Self Diagnosis Function
In combination with the Handheld Terminal, the following two functions are available.
SY
Short/Open Circuit Detection Function Counter Function
Series
It is possible to detect short or open circuit of input device such It is possible to ascertain the maintenance
as an electronic 2-wire switch and 3-wire switch and output period and identify the parts that require
device such as a solenoid valve. The location of the error can be maintenance by an input and output signal
identified by the indicator light and the network. ON/OFF counter function. When the counter
function is enabled and a certain number of
contact operations is reached, the display of
SV
counter will flash in red.
Series
Note) The counter function is not provided with the
Analog Unit.
S0700
Red flashing Open circuit
Series
Handheld Terminal
Forced Input and Output Function Can be used for the adjustment of
VQC
The input and output signals are internal parameters and the monitoring
controlled forcedly without a PLC. The of input and output signal status.
Series
startup time after facility introduction Parameters: Analog data format
can be shortened. Analog measurement range
Input filter selection
Counter function
Open circuit detection
function, etc.
6
Fieldbus System EX600
Individual Units can be connected and removed one by one.
A unique clamping method is adopted to prevent screws from falling out.
It is easy to separate the Unit just by loosening joint bracket.
7
5 Port Solenoid Valves SY3000/5000/7000
Different sizes (SY3000/5000 or SY5000/7000) can be mixed! Overall length
of manifold
The installation area can be reduced, and the number of SI Units and
Approx. 22%
EX600
the wiring can also be reduced.
reduction
Single manifold Single manifold Mixed manifold
SY5000 3 stations SY3000 5 stations SY5000 3 stations SY3000 5 stations
Series
Example of SY3000
and SY5000
Installation +
space
SY
Series
Approx. 102 mm Approx. 117 mm Approx. 170 mm
SV
Number of
Series
SI Units,
+
Unit cost
S0700
Serial Units 2 sets Serial Unit 1 set
Series
Bottom ported type is available!
Top or bottom ported reduces the footprint.
VQC
Series
Installation
Panel fitting
8
Fieldbus System ®
How to Order
SI Unit EX600 S EN 3
Protocol Version
Symbol Description Symbol Condition
PR PROFIBUS DP Nil Select in the case of MJ, EN, EC or PN.
DN DeviceNet™ A Select in the case of PR or DN.
MJ CC-Link
EN EtherNet/IP™ Note 1) Output type
EC EtherCAT® Note 1) Symbol Description Condition
PN PROFINET Note 1) 1 PNP (Negative common) Can be selected by all protocols.
2 NPN (Positive common) Can be selected by all protocols.
PNP (Negative common)
3 EtherNet/IP (2 ports)
Can be selected in the case of EN.
How to Order
EX600
Analog Input Unit EX600 AX A
Analog input Number of Input channels and Connector
Series
Number of input
Symbol Connector
channels
A 2 channels M12 connector (5 pins) 2 pcs.
SY
Series
Analog Output Unit EX600 AY A
Analog output Number of Output channels and Connector
Number of output
Symbol Connector
channels
SV
A 2 channels M12 connector (5 pins) 2 pcs. Note1) 2)
Series
S0700
Analog Input/Output Unit EX600 AM B
Analog input/output Number of Input/Output channels and Connector
Series
Number of input Number of output
Symbol Connector
channels channels
M12 connector
B 2 channels 2 channels
(5 pins) 4 pcs. Note1) 2)
VQC
Series
End Plate EX600 ED 2
Power connector Mounting method
Symbol Connector Symbol Description
2 M12 (5 pins) Nil Without DIN rail mounting bracket
3 7/8 inch (5 pins) 2 With DIN rail mounting bracket
3 With DIN rail mounting bracket (Specialized for SY series)
SI Unit Specifications
Environmental resistance
Storage temperature range –20 to 60°C
Operating humidity range 35 to 85% RH (No dew condensation)
Withstand voltage Note) 500 VAC for 1 minute between external terminals and FE
Insulation resistance Note) 500 VDC, 10 MW or more between external terminals and FE
Note) Except Handheld Terminals
SI Unit (EX600-SPRlA)
Model EX600-SPR1A EX600-SPR2A
Protocol PROFIBUS DP (DP-V0)
Communication
Load Solenoid valve with surge voltage suppressor 24 VDC, 1.5 W or less (SMC)
Power supply 24 VDC, 2 A
Fail safe HOLD/CLEAR/Forced power ON
Protection Short-circuit protection
Enclosure IP67 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
Note) The setting file can be downloaded from the SMC website, http://www.smcworld.com
SI Unit (EX600-SDNlA)
Model EX600-SDN1A EX600-SDN2A
Protocol DeviceNet™: Volume 1 (Edition 2.1), Volume 3 (Edition 1.1)
Device type Group 2 Only Server
Communication
Load Solenoid valve with surge voltage suppressor 24 VDC, 1.5 W or less (SMC)
Power supply 24 VDC, 2 A
Fail safe HOLD/CLEAR/Forced power ON
Protection Short-circuit protection
Enclosure IP67 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
Note) The setting file can be downloaded from the SMC website, http://www.smcworld.com
SI Unit (EX600-SMJl)
Model EX600-SMJ1 EX600-SMJ2
Protocol CC-Link (Ver. 1.10, Ver. 2.00)
Communication
Load Solenoid valve with surge voltage suppressor 24 VDC, 1.5 W or less (SMC)
Power supply 24 VDC, 2 A
Fail safe HOLD/CLEAR/Forced power ON
Protection Short-circuit protection
Enclosure IP67 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
A 11
Fieldbus System Series EX600
EX600
SI Unit (EX600-SENl)
Model EX600-SEN1 EX600-SEN2 EX600-SEN3 EX600-SEN4
Number of communication ports 1 port 2 ports
EtherNet/IP™ EtherNet/IP™
Protocol
Series
(Conformance version: Composite 6) (Conformance version: Composite 11)
Communication speed 10/100 Mbps
Communication method Full duplex/Half duplex
Communication Configuration file EDS file Note)
Occupation area
Max. (512 inputs/512 outputs)
(Number of inputs/outputs)
IP address setting SI Unit switch settings: 192.168.0 or 1.1 to 254
EX600-SEN1/2
SY
range Through DHCP server: Optional address
Vendor ID: 7 (SMC Corporation) Vendor ID: 7 (SMC Corporation)
Series
Device information
Device type: 12 (Communication Adapter) Device type: 12 (Communication Adapter)
Product code: 126 Product code: 203
QuickConnect™ — Compliant
DLR — Compliant
WEB server — Compliant
Internal current consumption 120 mA or less
Output type Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common)
SV
Number of outputs 32 outputs (8/16/24/32 outputs selectable) 32 outputs
Solenoid valve with surge voltage suppressor Solenoid valve with surge voltage suppressor
Output
Series
Load
24 VDC, 1.5 W or less (SMC) 24 VDC, 1.0 W or less (SMC)
Power supply 24 VDC, 2 A
EX600-SEN3/4 Fail safe HOLD/CLEAR/Forced power ON
Protection Short-circuit protection
Enclosure IP67 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
S0700
Weight 300 g
Note) The setting file can be downloaded from the SMC website, http://www.smcworld.com
SI Unit (EX600-SECl)
Series
Model EX600-SEC1 EX600-SEC2
Protocol EtherCAT® (Conformance Test Record V.1.2)
Communication
VQC
Max. (512 inputs/512 outputs)
(Number of inputs/outputs)
Internal current consumption
100 mA or less
(Power supply for Control/Input)
Series
Output type Source/PNP (Negative common) Sink/NPN (Positive common)
Number of outputs 32 outputs (8/16/24/32 outputs selectable)
Output
EX600-SECl Load Solenoid valve with surge voltage suppressor 24 VDC, 1.5 W or less (SMC)
Power supply 24 VDC, 2 A
Fail safe HOLD/CLEAR/Forced power ON
Protection Short-circuit protection
Enclosure IP67 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
Note) The setting file can be downloaded from the SMC website, http://www.smcworld.com
SI Unit (EX600-SPNl)
Model EX600-SPN1 EX600-SPN2
Protocol PROFINET IO (PROFINET RT)
Communication
Load Solenoid valve with surge voltage suppressor 24 VDC, 1.0 W or less (SMC)
EX600-SPNl Power supply 24 VDC, 2 A
Fail safe HOLD/CLEAR/Forced power ON
Protection Short-circuit protection
Enclosure IP67 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
Note) The setting file can be downloaded from the SMC website, http://www.smcworld.com
12 A
Series EX600
EX600-DXlF
13
Fieldbus System Series EX600
EX600
Digital Output Unit
Model EX600-DYPB EX600-DYNB EX600-DYPE EX600-DYNE EX600-DYPF EX600-DYNF
Output type PNP NPN PNP NPN PNP NPN
Series
D-sub socket (25 pins) Spring type terminal block
Output connector M12 (5-pin) socket Note)
Lock screw: No.4-40 UNC (32 pins)
Output
Number of outputs 8 outputs (2 outputs/Connector) 16 outputs 16 outputs (2 outputs x 8 blocks)
Supplied voltage 24 VDC
0.5 A/Output
Max. load current
2 A/Unit
EX600-DYlB
Protection Short-circuit protection
SY
0.08 to 1.5 mm2
Applicable wire — —
(AWG16 to 28)
Series
Current consumption 50 mA or less
IP67 IP40
Enclosure
(Manifold assembly) (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
SV
Note) M12 (4-pin) connector can be connected.
EX600-DYlE
Series
EX600-DMlE
Digital Input/Output Unit
Model EX600-DMPE EX600-DMNE EX600-DMPF EX600-DMNF
Input/Output type PNP NPN PNP NPN
D-sub socket (25 pins)
Connector Spring type terminal block (32 pins)
Lock screw: No.4-40 UNC
S0700
Number of inputs 8 inputs 8 inputs (2 inputs x 4 blocks)
Supplied voltage 24 VDC
0.5 A/Block
Series
Max. supplied current 2 A/Unit
2 A/Unit
Input
VQC
(At PNP input, between the pin for input terminal and supplied voltage of 0 V)
5 V or less (At NPN input, between the pin for input terminal and supplied voltage of +24 V)
OFF voltage
(At PNP input, between the pin for input terminal and supplied voltage of 0 V)
Series
Number of outputs 8 outputs 8 outputs (2 outputs x 4 blocks)
Supplied voltage 24 VDC
Output
0.5 A/Output
Max. load current
2 A/Unit
Protection Short-circuit protection
Applicable wire — 0.08 to 1.5 mm2 (AWG16 to 28)
Current consumption 50 mA or less 60 mA or less
Enclosure IP40 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
14
Series EX600
15
Fieldbus System Series EX600
EX600
Analog Input/Output Unit
Model EX600-AMB
Input type Voltage input Current input
Input connector M12 (5-pin) socket Note 1)
Series
Input channel 2 channels (1 channel/Connector)
Supplied voltage 24 VDC
Max. supplied current 0.5 A/Connector
Protection Short-circuit protection
Input
Input 12 bit
0 to 10 V, 1 to 5 V, 0 to 5 V 0 to 20 mA, 4 to 20 mA
signal range resolution
SY
EX600-AMB Max. rated input signal 15 V 22 mA Note 2)
Input impedance 100 kW 250 W
Series
Linearity (25°C) ±0.05% F.S.
Repeatability (25°C) ±0.15% F.S.
Absolute accuracy (25°C) ±0.5% F.S. ±0.6% F.S.
Output type Voltage output Current output
Output connector M12 (5-pin) socket Note 1)
SV
Output channel 2 channels (1 channel/Connector)
Supplied voltage 24 VDC
Series
Max. load current 0.5 A/Connector
Output
S0700
Linearity (25°C) ±0.05% F.S.
Repeatability (25°C) ±0.15% F.S.
Absolute accuracy (25°C) ±0.5% F.S. ±0.6% F.S.
Current consumption
Series
100 mA or less
Enclosure IP67 (Manifold assembly)
Standards CE Marking, UL (CSA), RoHS compliant
Weight 300 g
Note 1) M12 (4-pin) connector can be connected.
VQC
Note 2) When input signal exceeds 22 mA, the protection function activates and the input signal is interrupted.
Series
End Plate
Model EX600-ED2-l EX600-ED3-l
specifications
EX600-ED2-l
Handheld Terminal
Model EX600-HT1A-l
Power supply Power supplied from SI Unit connector (24 VDC)
Current consumption 50 mA or less
Display LCD with backlight
Handheld Terminal cable
Connection cable
(1 m ··· EX600-AC010-1, 3 m ··· EX600-AC030-1)
Enclosure IP20
EX600-HT1A-l Standards CE Marking, RoHS compliant
Weight 160 g
16
Series EX600
Parts Description
SI Unit
w
q e r
No. Name Use
t
1 Status indication LED Displays Unit status.
2 Indication cover Open for setting the switch.
y Loosen for opening the indication
3 Indication cover set screw
cover.
4 Connector (BUS OUT) Connects to the fieldbus output cable.
5 Marker groove Can be used to mount a marker.
!1
u Connects to the Handheld
i qw
6 Connector (PCI)
!0 Terminal cable.
o e t 7 Valve plate mounting holes Fixes a valve plate in place.
EX600-SPRlA
EX600-SMJl 8 Valve plate mounting groove Inserts a valve plate.
EX600-SDNlA y 9 Joint bracket Links Units to one another.
Transmits signals to the neighboring
10 Connector for Unit (Plug)
q w e r !2 Unit and supplies power.
Connects to the cable for fieldbus
t 11 Connector (BUS IN)
input.
!1
y !0 u 12 MAC address name plate Note)
Displays a unique 12-digit MAC
i address for each SI Unit.
EX600-SEN1/2
o Mounted on the connectors (BUS OUT
!2 13 Seal cap
and PCI) at the time of shipment.
Note) MAC address name plate is not provided on the EX600-SEC.
!1 !3
!0 u
q i
EX600-SEN3/4 o
EX600-SECl
EX600-SPNl
Handheld Terminal
No. Name Use
q Displays operation and Unit
1 LCD
information.
Connects to the Handheld Terminal
2 Connector
cable.
Connects the SI Unit to the Handheld
3 Handheld Terminal cable
Terminal.
e From the selection screen, goes to
the screen for the item selected.
4 Enter button ( )
On the settings screen, registers the
settings that have been made so far.
Moves the cursor on the LCD up,
down, left or right.
w Cursor button
Moves the cursor on the selection
screen up, down, left or right to make
5
( ) selections.
On the settings screen, increases or
decreases the value of settings or
!0 r turns settings on and off.
Functions in accordance with
6 F2 button ( )
o on-screen display or instructions.
Functions in accordance with
7 F1 button ( )
on-screen display or instructions.
i t On the selection screen, goes back to
the previous screen.
8 Escape button ( ) On the settings screen, cancels the
settings that have been made so far
and goes back to the previous screen.
Lights up red when the EX600
9 ERROR LED
diagnosis errors occur.
Connects to the EX600 SI Unit, and
u y 10 POWER LED lights up green when control/input
power supply is on.
Operation buttons
17
Fieldbus System Series EX600
Digital Unit
EX600
q w q w No. Name Use
e e 1 Status indication LED Displays Unit status.
Series
2 Connector Connects with input or output devices.
3 Marker groove Can be used to mount a marker.
Fixes the D-sub connector in place.
4 Lock screw
(No.4-40 UNC)
5 Joint bracket Links Units to one another.
Transmits signals to the neighboring
6 Connector for Unit (Plug)
Unit and supplies power.
SY
y y
Series
EX600-DXlB t EX600-DXlCl t
EX600-DYlB
q w q q
w
e e w e
r
SV
Series
y y y
S0700
EX600-DXlD t EX600-DXlE t EX600-DXlF t
EX600-DYlE EX600-DYlF
EX600-DMlE EX600-DMlF
Series
Analog Unit
VQC
1 Status indication LED Displays Unit status.
2 Connector Connects with input or output devices.
3 Marker groove Can be used to mount a marker.
Series
4 Joint bracket Links Units to one another.
Transmits signals to the neighboring
5 Connector for Unit (Plug)
Unit and supplies power.
t t
EX600-AXA r EX600-AMB r
EX600-AYA
End Plate
EX600-ED2-l r EX600-ED3-l r
e w w
e
18
Series EX600
Dimensions
SI Unit EX600-SPRlA EX600-SENl
EX600-SDNlA EX600-SECl
EX600-SMJl EX600-SPNl
10.7 55.2 10.7 55.2
47 47
26 26
23.7
106
106
22
22
11.5
106.5
8
56.4
56.4
22.1
22.1
106
106
90
90
30.35
30.35
56.6
36.65
30.2
73.6
56.6
13.2
30.2
13.2
Handheld Terminal
170 (39.6) 20
76
19
Fieldbus System Series EX600
Digital Unit
EX600
EX600-DXlB EX600-DXlCl EX600-DXlD EX600-DXlE
EX600-DYlB EX600-DYlE
EX600-DMlE
Series
10.7 52.5 10.7 52.5 10.7 52.5
47 47 47 10.7 52.5
20 23 20 47
SY
106
106
106
81
27
106
Series
43.5
14.5
37
0.3
SV
3
8
8
Series
56.4
56.4
56.4
56.4
22.1
22.1
22.1
22.1
S0700
Analog Unit
EX600-DXlF EX600-AXA EX600-AMB
Series
EX600-DYlF EX600-AYA
EX600-DMlF
10.7 52.5 10.7 52.5
10.7 52.5 47 47
47 20 20
VQC
Series
106
106
106
37
2.2
8
8
56.4
56.4
56.4
22.1
22.1
22.1
20
Series EX600
Accessories
t Marker
w Valve plate
r Seal cap
(M12)
y Power supply
cable with
7/8 inch
connector e Reinforcing brace
(for direct mounting)
e Reinforcing brace
(for DIN rail mounting)
q End plate bracket
y 7/8 inch fieldwireable connector
EX600-ZMA2 EX600-ZMA3
(Specialized for SY series)
w Valve Plate
EX600-ZMV1 EX600-ZMV2
(Specialized for SY series)
21
Accessories Series EX600
e Reinforcing Brace
This bracket is used on the bottom of the Unit at the intermediate position for connecting 6 Units or more.
EX600
Note) Be sure to attach this bracket to prevent connection failure between the Units caused by deflection.
Series
Enclosed parts Enclosed parts
Round head screw (M4 x 5) 2 pcs. Round head screw (M4 x 6) 2 pcs.
SY
Series
r Seal Cap (10 pcs.) t Marker (1 sheet, 88 pcs.)
Be sure to mount a seal cap on any unused I/O connectors. The signal name of I/O device and each Unit address can be
Otherwise, the specified enclosure cannot be maintained. entered and mounted on each Unit.
SV
Series
S0700
y 7/8 Inch Connector and Its Related Parts
Series
• Power supply cable with 7/8 inch connector • Fieldwireable 7/8 inch connector [compatible to AWG22-16]
PCA-1558810 Straight 2 m PCA-1578078 Plug
PCA-1558823 Straight 6 m PCA-1578081 Socket
PCA-1558836 Right angle 2 m
VQC
PCA-1558849 Right angle 6 m
Series
Note) For M12 connector, description of B-coded for a reverse type is used as a connector shape.
22
Series EX600
ø17.5
≈ 61
47.3 5000 50
ø14.8
2 1 2 1
ø19
3 4 3 4
(ø6.5)
M12
Plug connector M12 Plug connector
Width across flats 16
pin arrangement SPEEDCON pin arrangement
Terminal no. Core wire color Width across flats 13
D-coded D-coded
1 Yellow: TD+
2 White: RD+
3 Orange: TD–
4 Blue: RD–
Connections
EX9 AC 020 EN PSRJ
Cable length Connector specification
010 1000 [mm] PSRJ M12 plug (straight) ⇔ RJ-45 connector
020 2000 [mm]
030 3000 [mm]
050 5000 [mm]
100 10000 [mm]
ø6.4
M12 RJ-45
47.3 L 44
EX600
Name Use Part no. Description
Series
connector
PCA-1557772 Cable with M8 connector (3 pins/3 m)
PCA-1557730 Fieldwireable connector (M8/3 pins/Plug/Piercecon® connection)
Fieldwireable
connector
For sensor PCA-1557743 Fieldwireable connector
PCA-1557756 (M12/4 pins/Plug/QUICKON-ONE connection/SPEEDCON)
SY
PCA-1557785 Y connector (2 x M12 (5 pins)-M12 (5 pins)/SPEEDCON)
Y connector For sensor
PCA-1557798 Y connector (2 x M8 (3 pins)-M12 (4 pins)/SPEEDCON)
Series
Note) When using the Y connector, connect it to the connector on the I/O Unit through the sensor cable (PCA-1557769) with the M12 connector.
M12 M12
x2
SV
M12
Series
M8/M12 connector
M8 M12
S0700
x2
Series
Y connector PCA-1557769 I/O Unit
VQC
Series
M8/M12 connector
For details about the cables and connectors that can be purchased from
SMC, refer to the WEB catalog or the Best Pneumatics No. 1.
24
Series EX600
Table of Mountable Units
The Units that can be connected differ depending on the product number. : Acceptable
Before mounting, please check the types of Units that can be connected. u : Not acceptable
Product number
SI Unit
EX600-SENl
EX600-SPRl EX600-SPRlA (EtherNet/IP™)
(PROFIBUS DP) (PROFIBUS DP) EX600-SMJl EX600-SECl
EX600-SDNl EX600-SDNlA (CC-Link) (EtherCAT®)
(DeviceNet™) (DeviceNet™) EX600-SPNl
(PROFINET)
Table of Compatible Units Version Version Version Version
Mountable with Each SI Unit Nil A Nil Nil
EX600-DXlB
EX600-DXlCl
Digital Input Unit EX600-DXlD
EX600-DXlE u
EX600-DXlF u
Product number
EX600-DYlB
Digital Output Unit EX600-DYlE u
EX600-DYlF u
EX600-DMlE u
Digital Input/Output Unit
EX600-DMlF u
Analog Input Unit EX600-AXA
Analog Output Unit EX600-AYA u
Analog Input/Output Unit EX600-AMB u
EX600-HT1-l u
Handheld Terminal
EX600-HT1A-l
Product number
Handheld Terminal
EX600-HT1-l EX600-HT1A-l
Table of Compatible Units Capable of Version Version
Communication with Handheld Terminals Nil A
EX600-SPRl
(PROFIBUS DP)
EX600-SPRlA
(PROFIBUS DP)
EX600-SDNl
(DeviceNet™)
EX600-SDNlA
(DeviceNet™)
SI Unit
EX600-SMJl
(CC-Link)
EX600-SENl u
(EtherNet/IP™)
Product number
EX600-SECl u
(EtherCAT®)
EX600-SPNl u
(PROFINET)
EX600-DXlB
EX600-DXlCl
Digital Input Unit EX600-DXlD
EX600-DXlE u
EX600-DXlF u
EX600-DYlB
Digital Output Unit EX600-DYlE u
EX600-DYlF u
EX600-DMlE u
Digital Input/Output Unit
EX600-DMlF u
Analog Input Unit EX600-AXA
Analog Output Unit EX600-AYA u
Analog Input/Output Unit EX600-AMB u
25
EX600
Series
Manifold Solenoid Valves for Series EX600
SY
Series
Series SY3000/5000/7000
Type 10 Side Ported/ Type 11 Bottom Ported P. 27
Type 12 Top Ported P. 37
SV
Series
S0700
Series SV1000/2000/3000 P. 39
Series
VQC
Series
Series S0700 P. 47
Series VQC1000 P. 51
Series VQC2000 P. 55
Series VQC4000 P. 59
Series VQC5000 P. 62-1
26 A
EX600
Type 10
Side Ported
Type 11
5 Port Solenoid Valve
Series SY3000/5000/7000
Bottom Ported
RoHS
How to Order Manifold
···
Direct
9 9 stations AA mounting Note 2) V V
* Without SI Unit, the symbol is nil. BA V —
* SI Unit is not included in I/O Unit stations. Dl Note 1) — —
w Type * When I/O Unit is selected, it is shipped DIN rail
Al Note 1) mounting V V
10 Side ported separately, and assembled by users. Refer to Bl Note 1) V —
11 Bottom ported* the attached operation manual for mounting
method. Note 1) Enter the number of stations inside l
* Bottom ported type of the SY3000 uses the
when it is larger than the number of
manifold base of the SY5000. When ordering,
valve stations. (Refer to “DIN Rail
refer to How to Order “Plug-in Mixed Option” below.)
Mounting Type Manifold” in the SY5000/5000/
7000 series catalog (CAT.ES11-103).
y Valve stations Note 2) Only direct mounting is available for
Symbol Stations Note Type 11 (Bottom ported).
02 2 stations
Double wiring Note 1)
···
···
e SI Unit 16 16 stations
DIN Rail Option
0 Without SI Unit Note 1) 2) Nil Direct mounting
02 2 stations
Q DeviceNet™ Specified layout Note 2) 0 Without DIN rail (with bracket)
···
···
···
V CC-Link Note 1) Double wiring: 2-position single, total length of specified stations.
ZE EtherNet/IP™ (1 port) 24 For 24 stations
double, 3-position and 4-position valves
EA EtherNet/IP™ (2 ports) can be used on all manifold stations. * If the DIN rail must be mounted without an SI
D EtherCAT® Use of a 2-position single solenoid will Unit, select D0. Then, refer to L3 of the
result in an unused control signal. If this dimensions for the DIN rail length and order
F PROFINET
separately. (Refer to the SY3000/5000/7000
is not desired, order with a specified
Note 1) I/O Unit cannot be mounted without SI layout. series catalog (CAT.ES11-103) for the DIN
Unit. Note 2) Specified layout: Indicate the wiring rail part number.)
Note 2) Valve plate which connects manifold specifications on the manifold * Refer to the SY3000/5000/7000 series
and SI Unit is not mounted to a valve specification sheet. (Note that catalog (CAT.ES11-103) for the fixation of
without SI Unit. Refer to page 65 for 2-position double, 3-position and DIN rail mounting type manifold.
mounting method. 4-position valves cannot be used where
single wiring has been specified.)
* This also includes the number of blanking
r SI Unit output polarity, end plate type plate assembly.
Power supply Power supply
SI Unit output polarity with M12 with 7/8 inch
connector connector
Without SI Unit Nil u P, E port entry, SUP/EXH block assembly
SI Unit positive common 2 3 P, E port entry Internal pilot
Internal pilot,
External pilot
SI Unit negative common 4 5 Built-in silencer
* Ensure a match with the common specification U side (2 to 10 stations) U C G
of the valve to be used. D side (2 to 10 stations) D E H
* Without SI Unit, the symbol is nil. Both sides (2 to 24 stations) B F J
* 3/5(E) port is plugged for built-in silencer type.
* When built-in silencer type is used, keep the exhaust port from coming
in direct contact with water or other liquids.
Refer to the catalog of each series for details on manifold solenoid valve
specifications, Common Precautions and Specific Product Precautions.
27
Series SY3000/5000/7000
EX600
5 Port Solenoid Valve
EX600
Series
i A, B port size (Metric/One-touch fitting) A, B port size (Inch/One-touch fitting)
Type 10/Side ported Type 11/Bottom ported Type 10/Side ported Type 11/Bottom ported
Symbol A, B port Symbol A, B port
SY3000 SY5000 SY7000 SY5000 SY7000 SY3000 SY5000 SY7000 SY5000 SY7000
SY
C2 ø2 V — — — — N1 ø1/8" V — — — —
Series
C3 ø3.2 V — — — — N3 ø5/32" V V — V —
Straight
C4 ø4 V V — V — N7 ø1/4" V V V V V
Straight
C6 ø6 V V V V V N9 ø5/16" — V V V V
C8 ø8 — V V V V N11 ø3/8" — — V — V
C10 ø10 — — V — V CM* Straight port, mixed sizes V V V V V
C12 ø12 — — V — V LN3 ø5/32" V — — — —
SV
CM*
Upward
Straight port, mixed sizes V V V V V LN7 ø1/4" V V — — —
L4 ø4 V V — — — LN9 ø5/16" — V — — —
Series
L6 ø6 V V V — — LN11 ø3/8" — — V — —
Upward
Elbow Note)
L8 ø8 — V V — — BN3 ø5/32" V — — — —
Downward
B4 ø4 V V — — — BN11 ø3/8" — — V — —
S0700
Downward
Series
B12 ø12 — — V — — (One-touch fittings)
Elbow port, mixed sizes
LM* (Including upward and V V V — —
downward piping)
P, E port size
ø8 ø10 ø12 ø10 ø12
(One-touch fittings)
VQC
Note) To avoid interference with the body or piping, select downward elbow port when mounting the optional spacer assembly [SY3000/5000/7000 series
catalog (CAT.ES11-103)].
∗ Indicate the sizes on the manifold specification sheet in the case of “CM”, “LM”.
Series
∗ The direction of P, E port fittings is the same as for A, B port. If selecting “LM”, indicate it on the manifold specification sheet for the P, E port fitting
direction.
Example (SS5Y3-10S6l-l) SS5Y3-10S6Q42-05B-C6 ··· 1 set (Type 10 5-station manifold base part no.)
*SY3100-5U1 ······················· 3 sets (2-position single part number)
*SY3200-5U1 ······················· 2 sets (2-position double part number)
*EX600-DXPD ····················· 1 set I/O Unit part number (Station 1)
Digital Input Unit Digital Output Unit 2-position single *EX600-DYPB ····················· 1 set I/O Unit part number (Station 2)
EX600-DXPD EX600-DYPB SY3100-5U1 (3 sets)
The asterisk denotes the symbol for assembly.
End plate Note 1) SI Unit Note 1) 2-position double Prefix it to the part numbers of the valve etc.
EX600-ED2 EX600-SDN1A SY3200-5U1 (2 sets)
• The valve arrangement is numbered as the 1st station from the D side.
0 1 • Under the manifold part number, state the valves to be mounted, then the
I/O Units in order from the 1st station as shown in the figure above.
2 3
B A B A B A B A B A
14 A 14 A 14 A 14 A 14 A
If the arrangement becomes complicated, specify on the manifold
D side
PWR
OUT U side specification sheet.
0 1
Note 1) Do not enter the SI Unit part number and the end plate part number
4 5
2 3 12 B 12 B 12 B 12 B 12 B
PCI
BUS BUS
IN OUT
together.
8 7
Note 2) When mixing top ported configurations, select from the SY3000/
5000/7000 series catalog (CAT.ES11-103).
1 2 3 4 5 Valve stations In this case, use caution as there is also output on the A and B port
1 2 I/O Unit stations on base side.
Specify on the manifold specification sheet if plugs are required on
the A and B port on base side.
Protective class
class # (Mark: )
28
Series SY3000/5000/7000
Refer to the SY3000/5000/7000
series catalog (CAT.ES11-103)
How to Order Valves (With mounting screw) for valve specifications.
SY 3 1 0 0 5 1
q w e r t y u i o !0 !1
Base mounted
w Type of actuation
1 Single
E: F:
2
2-position
Double u Coil type Push-turn Slide locking
3 Closed center Nil Standard locking type
4 3-position Exhaust center T With power saving circuit (Continuous duty type) lever
5 Pressure center * Be sure to select power saving circuit type type
A* N.C./N.C. when the valve is continuously energized for
4-position long periods of time.
B* dual 3-port
N.O./N.O.
* Be careful of the energizing time when the
C* N.C./N.O. power saving circuit is selected. Refer to the * Refer to the SY3000/5000/7000 series
* Only rubber seal type is available for SY3000/5000/7000 series catalog (CAT. catalog (CAT.ES11-103) for with safety slide
4-position dual 3-port valve. ES11-103) for details. locking manual override.
Protective class
class # (Mark: )
29
Series SY3000/5000/7000
EX600
5 Port Solenoid Valve
EX600
D side U side
(L3)
Series
(5.3) (L4)
(DIN rail mounting hole pitch: 12.5) Manual override Note 2)
(L5) L1
DIN rail holding screw 5.5 L6 L2 ( Push-turn locking slotted type:
Press, then rotate it. )
(For DIN rail mounting) 47 8 DIN rail holding screw 1.5 4(A) port side
Communication connector
: Blue (For rubber seal)
Power connector (For DIN rail mounting)
2 x M4 Mounting hole : Gray (For metal seal)
85.1 Light/surge 2(B) port side : Yellow
Marker groove
SY
voltage suppressor
Series
0 1
(5.5)
B A B A B A B A B A
(35)
2 3
92.6
14 A 14 A 14 A 14 A 14 A
83
106
PWR
90
OUT
60.5
0 1
(40.9)
4 5
2 3
4.6
(8)
12 B 12 B 12 B 12 B 12 B
BUS PCI BUS
IN OUT
SV
8 7
Series
8
4.6
1.7
)
(4.9)
C6: 3.6
N7: 7.4
86.6 FE
terminal 5.4
4 x M4 Mounting hole
(
End plate (Fitting for the type with P/E
Digital Input Unit ports on the U and/or D sides)
Valve plate
Input connector
S0700
SI Unit
Output connector One-touch fitting
Digital Output Unit Connector for Handheld Terminal [4(A), 2(B) port]
Applicable tube O.D.: ø2
: ø3.2, ø1/8"
Series
(Station 1) (Station n) : ø4, ø5/32"
11.5
: ø6, ø1/4"
8
1 P 1 P
63.1
VQC
56.6
3/5 E 2 B2 B2 B2 B2 B 3/5 E
40.2
13.2
21.6
4 A4 A4 A4 A4 A
18
Series
10.6
13.6
(For DIN rail
(7.5)
mounting)
D side U side
(L3)
(5.3) (L4)
(DIN rail mounting hole pitch: 12.5)
(L5) L1 Manual override Note 2)
0 1
(5.5)
B A B A B A B A B A
2 3
(35)
92.6
14 A 14 A 14 A 14 A 14 A
83
106
90
60.5
0 1
(40.9)
4 5
PWR
2 3
4.6
BUS PCI BUS
12 B 12 B 12 B 12 B 12 B
(8)
53
IN OUT
8 7
8
4.6
1.7
)
(4.9)
C6: 3.6
N7: 7.4
36.7 FE
terminal 5.4 4 x M4 Mounting hole
(
Power connector End plate (Fitting for the type with P/E
Digital Input Unit ports on the U and/or D sides)
Valve plate
Input connector One-touch fitting
Output connector SI Unit [4(A), 2(B) port]
Applicable tube O.D.: ø2
Digital Output Unit Connector for Handheld Terminal : ø3.2, ø1/8"
: ø4, ø5/32"
11.5
(Station 1) (Station n)
: ø6, ø1/4"
8
1 P 1 P
63.1
56.6
3/5 E 2 B2 B2 B2 B2 B 3/5 E
40.2
13.2
21.6
4 A4 A4 A4 A4 A
18
10.6
13.6
(7.5)
(For DIN rail
One-touch fitting
mounting)
(Pitch)
(11.8)
EX600
D side U side
(L3)
(L4)
Series
(5.3)
(DIN rail mounting hole pitch: 12.5)
DIN rail holding screw
(L5) L1 Manual override Note 2)
(For DIN rail mounting)
Power connector
5.5
Communication connector
L6 L2
( Push-turn locking slotted type:
Press, then rotate it. )
47 8 DIN rail holding screw 1.5 4(A) port side
DIN rail
2 x M4 Mounting hole (For DIN rail mounting) : Blue (For rubber seal)
Light/surge voltage suppressor : Gray (For metal seal)
85.1 Marker groove
SY
2(B) port side : Yellow
Series
0 1
(5.5)
BA BA BA BA BA
2 3
(35)
14 A 14 A 14 A 14 A 14 A
97.5
113.4
PWR
90
OUT
0 1
4 5
81.2
2 3
PCI
(8)
(61.7)
BUS BUS
IN OUT
SV
5.5
7.4
12 B 12 B 12 B 12 B 12 B
8 7
Series
10.9
15.4
4.7
(5.9)
(8.3)
86.6 5.4
4 x M5 Mounting hole
FE End plate
terminal (Fitting for the type with P/E
Digital Input Unit Valve plate
S0700
ports on the U and/or D sides)
Input connector SI Unit
One-touch fitting
Output connector Connector for Handheld Terminal
[4(A), 2(B) port]
Applicable tube O.D.: ø4, ø5/32"
Series
Digital Output Unit (Station 1) (Station n)
: ø6, ø1/4"
: ø8, ø5/16"
11.5
1 P 1 P
VQC
73.2
2 B2 B2 B2 B2 B
56.6
13.2
3/5 E 3/5 E
33.4
29.1
Series
4 A4 A4 A4 A4 A
12.4
14.1
8.7
(For DIN rail
One-touch fitting
(7.5)
mounting)
0 1
(5.5)
BA BA BA BA BA
(35)
2 3 14 A 14 A 14 A 14 A 14 A
90
97.5
0 1
113.4
4 5
81.2
PWR
2 3
PCI
(8)
(61.7)
BUS BUS
60.4
IN OUT
5.5
7.4
12 B 12 B 12 B 12 B 12 B
8 7
10.9
15.4
4.7
(5.9)
36.7 (8.3)
Power connector FE terminal 5.4 4 x M5 Mounting hole
1 P 1 P
73.2
2 B2 B2 B2 B2 B
56.6
13.2
3/5 E 3/5 E
33.4
29.1
4 A4 A4 A4 A4 A
8.7
12.4
14.1
(For DIN rail
(7.5)
mounting)
EX600
D side U side
(L3)
(5.3) (L4)
Series
(DIN rail mounting hole pitch: 12.5)
Manual override Note 2)
DIN rail holding screw (L5) L1
(For DIN rail mounting)
Power connector
5.5 L6 L2 ( Push-turn locking slotted
type: Press, then rotate it. )
2 x M4 Mounting hole 47 8 DIN rail holding screw 1.5 4(A) port side
(DIN rail) Communication connector (For DIN rail mounting) : Blue (For rubber seal)
: Gray (For metal seal)
Marker groove Valve plate Light/surge voltage suppressor 2(B) port side: Yellow
85.1
SY
0 1
Series
(5.5)
B A B A B A B A B A
2 3
(35)
14 A 14 A 14 A 14 A 14 A
PWR
90
OUT
128.8
115
0 1
4 5
2 3
FE PCI
(8)
96.7
BUS BUS
IN OUT
terminal
(77.1)
SV
8 7
12 B 12 B 12 B 12 B 12 B
5.5
30.8
Series
22.8
5.4
8.8
3.9
(6)
86.6 SI Unit
(9.3)
(17.9)
(A, B port: ø12) 4 x M5 Mounting hole
End plate Connector for (Fitting for the type with P/E
Handheld Terminal ports on the U and/or D sides)
S0700
Digital Input Unit Digital Output Unit
One-touch fitting
Input connector Output connector [4(A), 2(B) port]
(Station 1) (Station n) Applicable tube O.D.: ø6, ø1/4"
: ø8, ø5/16"
Series
: ø10, ø3/8"
: ø12
11.5
2
8
82.7
1 P 1 P
VQC
2 B2 B2 B2 B2 B
(56.6)
56.6
13.2
3/5 E 3/5 E
35.2
31.6
4 A4 A4 A4 A4 A
Series
11.1
14.2
8.7
(Pitch)
(For DIN rail
(10)
mounting)
(14.3)
D side U side
(L3)
(5.3) (L4)
(DIN rail mounting hole pitch: 12.5)
(L5) L1 Manual override Note 2)
0 1
(5.5)
B A B A B A B A B A
(35)
2 3
14 A 14 A 14 A 14 A 14 A
90
128.8
115
0 1
4 5
PWR
2 3
FE PCI
96.7
BUS BUS
IN OUT (8)
(77.1)
terminal
75.8
8 7
5.5
12 B 12 B 12 B 12 B 12 B
31
22.8
5.4
8.8
End plate
3.9
(6)
36.7
(9.3)
Input connector Valve plate (Fitting for the type with P/E
ports on the U and/or D sides)
Output connector SI Unit
2
8
82.7
1 P 1 P
2 B2 B2 B2 B2 B
(56.6)
56.6
13.2
8.7
3/5 E 3/5 E
35.2
31.6
4 A4 A4 A4 A4 A
11.1
14.2
(For DIN rail
(Pitch)
(10)
(21.7)
mounting)
(14.3)
25 20.5 P = 19
Type 12
5 Port Solenoid Valve
Top Ported
Series SY3000/5000/7000
RoHS
How to Order Manifold
···
···
SI Unit positive common 2 3 16 16 stations
SI Unit negative common 4 5 02 2 stations
w SI Unit Specified layout Note 2)
···
···
* Without SI Unit, the symbol is nil. (Available up to 32 solenoids)
0 Without SI Unit Note 1, 2) * Ensure a match with the common 24 24 stations
Q DeviceNet™ specification of the value to be used. Note 1) Double wiring: 2-position single, double, 3-position
N PROFIBUS DP and 4-position valves can be used on all manifold
V CC-Link stations.
ZE EtherNet/IP™ (1 port) r I/O Unit stations Use of a 2-position single solenoid will result in an
EA EtherNet/IP™ (2 ports) Nil None unused control signal. If this is not desired, order
D EtherCAT® 1 1 station with a specified layout.
F Note 2) Specified layout: Indicate the wiring specifications
···
···
PROFINET
9 9 stations on the manifold specification sheet. (Note that
Note 1) I/O Unit cannot be mounted
2-position double, 3-position and 4-position
without SI Unit. * Without SI Unit, the symbol is nil.
valves cannot be used where single wiring has
Note 2) Valve plate which connects * SI Unit is not included in I/O Unit stations.
been specified.)
manifold and SI Unit, is not * When I/O Unit is selected, it is shipped
* This also includes the number of blanking plate assembly.
mounted to a valve without SI separately, and assembled by users. Refer to
Unit. Refer to page 65 for the attached operation manual for mounting
mounting method. method.
2 3
3/5E B A B A B A B A B A
4A 4A 4A 4A 4A
3/5E in direct contact with water or other liquids.
D side PWR
U side
Note) The P port entry for Option C is located on the U side, and for
OUT
4 5
0 1
1P 1P
Option E is on the D side.
2 3 2B 2B 2B 2B 2B
PCI
BUS BUS
IN OUT
1 2 3 4 5 Valve stations
1 2 I/O Unit stations Symbol SY3000 SY5000 SY7000
SS5Y3-12S6Q42-05B ·········· 1 set (Type 12 5-station manifold base part no.) Nil ø8 ø10 ø12
*SY3130-5U1-C6 ················· 3 sets (2-position single part number) * For N, sizes
N ø5/16" ø3/8" ø1/2" are in inches.
*SY3230-5U1-C6 ················ 2 sets (2-position double part number)
*EX600-DXPD ······················ 1 set I/O Unit part number (Station 1)
*EX600-DYPB ······················ 1 set I/O Unit part number (Station 2)
The asterisk denotes the symbol for assembly.
i Mounting
Prefix it to the part numbers of the solenoid valve etc. Nil Direct mounting
D DIN rail mounting (With DIN rail)
O The valve arrangement is numbered as the 1st station from the D side. D0 DIN rail mounting (Without DIN rail)
O Under the manifold part number, state the valves to be mounted, then
the I/O Units in order from the 1st station as shown in the figure above.
D3 For 3 stations
Specify a longer rail than
···
···
If the arrangement becomes complicated, specify on the manifold the standard length.
specification sheet. D24 For 24 stations
Note) Do not enter the SI Unit part number and the end plate part number * When it is necessary to mount a DIN rail without an SI Unit, select D0 and
together. order the DIN rail with required length separately by referring to L3 in the
dimensions. (Refer to the SY3000/5000/7000 series catalog (CAT.ES11-
103) for the DIN rail part number.)
Refer to the catalog of each series for details on manifold solenoid valve
* Refer to the SY3000/5000/7000 series catalog (CAT.ES11-103) for the
specifications, Common Precautions and Specific Product Precautions. fixation of DIN rail mounting type manifold.
37
Series SY3000/5000/7000
EX600
5 Port Solenoid Valve
EX600
SY 3 1 3 0 5 1 C6
q w e r t y u i o !0 !1 !2 !3
Series
Top ported
SY
* Only metal seal type is available for high 01 1/8 SY5000
pressure type. 02 1/4 SY7000
Series
One-touch fitting (Metric)
w Type of actuation Symbol A, B port SY3000 SY5000 SY7000
1
2-position
Single u Coil type C2 ø2 V — —
2 Double Nil Standard C3 ø3.2 V — —
3 Closed center T With power saving circuit (Continuous duty type) C4 ø4 V V —
4 3-position Exhaust center
* Be sure to select power saving circuit type C6 ø6 V V V
5 Pressure center
SV
when the valve is continuously energized for C8 ø8 —
A*
V V
N.C./N.C. long periods of time.
4-position C10 ø10 — —
B*
V
Series
N.O./N.O. * Note the specified energizing time when
dual 3-port C12 ø12 — —
C* power saving circuit is selected. Refer to the V
N.C./N.O.
SY3000/5000/7000 series catalog (CAT. One-touch fitting (Inch)
* Only rubber seal type is available for
ES11-103) for details.
4-position dual 3-port valves. Symbol A, B port SY3000 SY5000 SY7000
N1 ø1/8" V — —
N3 ø5/32" V V —
i Rated voltage
S0700
N7 ø1/4" V V V
e Seal type 5 24 VDC N9 ø5/16" — V V
0 Rubber seal N11 ø3/8" — — V
1 Metal seal
Series
o Light/surge voltage suppressor
and common specification
Surge voltage Common
!2 Thread type
r Pilot type Symbol With light
suppressor specification Nil Rc
Nil Internal pilot R — F G
VQC
R External pilot Non-polar N NPT
U V
S — Positive T NPTF
V * Only Nil is available for M5.
Z V common
Series
NS — Negative
t Back pressure check valve NZ V common
Nil None
* Select a valve from R, U, S or Z when the SI
H Built-in
Unit output polarity is positive common. !3 Type of mounting screw
* Only rubber seal type. Manifold installed type Select a valve from R, U, NS or NZ when the Nil Round head combination screw
is available if the back pressure check valve SI Unit output polarity is negative common. B Hexagon socket head cap screw
is required for a valve with metal seal. Refer * Only “Z” and “NZ” types are available for the Round head combination screw
to the SY3000/5000/7000 series catalog product with power saving circuit. K (Falling-out-prevention type)
(CAT.ES11-103) for Ordering Example.
Hexagon socket head cap screw
However, it is not recommended to use built- H
in valve type and manifold installed type at !0 Manual override (Falling-out-prevention type)
the same time because it will reduce the flow. * For “K” and “H”, the valve body cover has a
* Built-in valve type back pressure check valve Nil: D: drop prevention construction to stop the
is not available for 3-position type and Non-locking Push-turn mounting screws from falling out when the
SY7000 series. push type locking valve is removed for maintenance etc.
slotted type * When ordering a valve individually, the
base gasket is not included.
Since the base gasket is attached to the
manifold, please order the base gasket
separately if it is needed for maintenance
E: F: service. Refer to the SY3000/5000/7000
Push-turn Slide series catalog (CAT.ES11-103) for part
numbers of the base gasket and mounting
locking lever locking type
screw.
type
* “B” and “H” cannot be selected for the
individual SUP/EXH spacer assembly or
interface regulator.
38
EX600
5 Port Solenoid Valve ®
P Tie-rod Base
SS5V 1 10S6 Q D 05 U C6
Series
1 SV1000 Mounting
2 SV2000 Nil Direct mounting
3 SV3000 End plate type D DIN rail mounting (With DIN rail)
Nil No end plate D0 Note 1) DIN rail mounting (Without DIN rail)
Enclosure Power supply with M12 D3 For 3 stations When a longer DIN rail is
desired than the specified
Nil 2 connector
···
···
IP40 stations. (Specify a longer
W IP67 (Max. supplied current 2 A) D20 For 20 stations rail than the standard length.)
O When I/O Unit EX600-DllE Power supply with 7/8 inch Note 1) In the case of D0, only DIN rail mounting
or EX600-DllF are selected, 3 connector bracket is attached.
enclosure is IP40. (Max. supplied current 8 A) Note 2) DIN rail is not attached (but shipped
Refer to page 64 for details. together) on the manifold in the case of
O Without SI Unit, the symbol is nil.
with DIN rail. Refer to the SV series
SI Unit SI Unit output polarity catalog for mounting method.
Note 3) When selecting the DIN rail mounting (with
0 Without SI Unit Nil Positive common DIN rail) of the SV3000 series, and 9 I/O
Q DeviceNet™ N Negative common Unit stations will result in a total of 18
N PROFIBUS DP
O Without SI Unit, the symbol valve stations. With 19 and 20 stations,
V CC-Link is nil. the DIN rail mounting (with DIN rail)
ZE EtherNet/IP™ (1 port) cannot be indicated, so please exercise
EA EtherNet/IP™ (2 ports) I/O Unit stations caution. (Refer to “DIN Rail Overall
Length” on pages 45 and 46 .)
D EtherCAT® Nil None Note 4) When it is necessary to mount a DIN rail
F PROFINET 1 1 station without an SI Unit, select D0 and order the
O When “Without SI Unit” is DIN rail with required length separately by
···
···
···
···
EX600
Example (SS5V1) Digital Output Unit
2-position single
Digital Input Unit SI Unit Note) SV1100-5FU
EX600-DYPB EX600-SDN1A
EX600-DXPD 2-position double
Series
SV1200-5FU
End plate Note)
EX600-ED2
A
For the I/O Unit part number mounted, D side U side
B
refer to the following pages. A A A A A
SY
• Digital Input/Output Unit ········ Page 9
• Analog Input Unit ··················· Page 10
• Analog Output Unit ················ Page 10
Series
1 2 I/O Unit
• Analog Input/Output Unit ······· Page 10 1 2 3 4 5 Valve stations
stations
SS5V1-W10S6Q2N2D-05B-C6 ···· 1 set Manifold base part number Enter in order starting from the first station on the D side.
* SV1100-5FU · · · · · · · · · · ················ 3 sets Valve part number (Stations 1 to 3) If the arrangement becomes complicated, specify on the manifold
* SV1200-5FU · · · · · · · · · · ················ 2 sets Valve part number (Stations 4 to 5) specification sheet.
* EX600-DXPD · · · · · · · · · ················ 1 set I/O Unit part number (Station 1) Enter in order starting from the first station on the D side.
SV
* EX600-DYPB · · · · · · · · · ················ 1 set I/O Unit part number (Station 2) If the arrangement becomes complicated, specify on the manifold
The asterisk denotes the symbol for assembly. specification sheet.
Series
Prefix it to the part numbers of the solenoid valve etc. Note) Do not enter the SI Unit part number and the end plate part number together.
S0700
SV 1 1 0 0 5FU
Series
Series
Made to Order
1 SV1000
2 SV2000 Nil —
3 SV3000 X90 Fluororubber specification
VQC
Type of actuation Manual override
1 2-position single Nil: Non-locking push type D: Push-turn locking
2 2-position double slotted type
Series
3 3-position closed center
4 3-position exhaust center
5 3-position pressure center
A 4-position dual 3-port valve (N.C./N.C.)
B 4-position dual 3-port valve (N.O./N.O.)
C 4-position dual 3-port valve (N.C./N.O.)
* 4-position dual 3-port valves are applicable to
the SV1000/2000 series only.
Pilot type
Nil Internal pilot Light/surge voltage suppressor
R External pilot U With light/surge voltage suppressor
* External pilot type is not R With surge voltage suppressor
available for 4-position dual
3-port valves. Rated voltage
5 24 VDC
Back pressure check valve
Nil None
K Built-in
* Built-in back pressure check valve
type is applicable to the SV1000
series only.
* The product with a back pressure
check valve is not available for Refer to the catalog of each series for details on
3-position valves.
manifold solenoid valve specifications, Common
Precautions and Specific Product Precautions.
40
Series SV1000/2000/3000
Series SV1000
Dimensions
Power supply with M12 connector Manual override
Press and turn for
the locking type
4(A) port side: Orange
2(B) port side: Green Light/surge voltage suppressor
End plate
Marker groove
L4 L5 4 x ø4.3
Power connector
(For mounting)
85.1 26 47 8 L3
8
4.6
8
54.2
5.5
39.9
29.6
35
106
A
90
83
92.6
B
10.8
A A A A A
B B B B B
(3.2)
connector
(4.9)
connector Connector for
DIN rail holding screw Handheld Terminal
Valve plate
(For DIN rail mounting) Digital Input Unit DIN rail holding screw
Digital Output Unit Communication
2 x ø4.6 (For DIN rail mounting)
connector
(For mounting) 5.5 L7 L6
L2 5
(Rail mounting hole pitch: 12.5)
L1
One-touch fitting
D side U side
[4(A), 2(B) port]
Applicable tube O.D.: ø3.2, ø1/8"
ø4, ø5/32" One-touch fitting
ø6, ø1/4" [1(P), 3/5(E) port]
(Station 1) (Station n) Applicable tube O.D.: ø8, ø5/16"
59.5
P 1 P 1 45.5
2 B 2 B 2 B 2 B 2 B
24.6
E 3/5 E 3/5
23
4 A 4 A 4 A 4 A 4 A
10
8.6
(Pitch)
18.3 P = 10.5
13.5 18.3
L2 = L1 – 10.5
11.8
L3 = 10.5 x n1 + 53
L4 = L3 + 81 + 47 x n2
L5 = (L1 – L4)/2
L6 = 10.5 x n1 + 42
L7 = 47 x n2 + 81
n1: Valve stations
n2: I/O Unit stations
Series SV1000
Dimensions
Power supply with 7/8 inch connector
EX600
Manual override
Press and turn for
the locking type
4(A) port side: Orange
Light/surge voltage suppressor
2(B) port side: Green
Series
End plate Marker groove
L4 L5 4 x ø4.3
16.5 47 8 L3 (For mounting)
8
4.6
8
54.2
5.5
39.9
29.6
SY
35
106
A
90
92.6
83
B
10.8
A A A A A
Series
B B B B B
Input SI Unit
Power connector Output
(3.2)
connector
(4.9)
connector Connector for
FE terminal Handheld Terminal Valve plate
Digital Input Unit
DIN rail holding screw
SV
Digital Output Unit Communication DIN rail holding screw
(For DIN rail mounting) connector
(For DIN rail mounting)
L7 L6
Series
2 x ø4.6 5.5
(For mounting) L2 5
(Rail mounting hole pitch: 12.5)
L1
S0700
Series
D side One-touch fitting U side
[4(A), 2(B) port]
Applicable tube O.D.: ø3.2, ø1/8" One-touch fitting
ø4, ø5/32" [1(P), 3/5(E) port]
ø6, ø1/4" (Station 1) (Station n) Applicable tube O.D.: ø8, ø5/16"
VQC
59.5
56.6
Series
P 1 P 1 45.5
2 B 2 B 2 B 2 B 2 B
24.6
E 3/5 E 3/5
23
4 A 4 A 4 A 4 A 4 A
8.6
10
7.5
(Pitch)
(For DIN rail mounting)
18.3 P = 10.5
13.5 18.3
L2 = L1 – 10.5
11.8
L3 = 10.5 x n1 + 53
L4 = L3 + 97.5 + 47 x n2
L5 = (L1 – L4)/2
L6 = 10.5 x n1 + 42
L7 = 47 x n2 + 81
n1: Valve stations
n2: I/O Unit stations
Series SV2000
Dimensions
Power supply with M12 connector Manual override
Press and turn for
the locking type
4(A) port side: Orange Light/surge voltage suppressor
End plate Marker groove 2(B) port side: Green 4 x ø5.3
L4 L5 (For mounting)
Power connector
85.1 26 47 8 L3
5.4
8
29.6
5.5
54.2
47.7
A
A
35
106
90
109.4
B
97.5
115.5
12.2
A A A A A
B B B B B
Input SI Unit
FE terminal connector Output
(4.9)
Connector for
(5.3)
DIN rail holding screw connector Valve plate
Handheld Terminal
(For DIN rail mounting) Digital Input Unit Communication
2 x ø4.6 Digital Output Unit connector
DIN rail holding screw
(For mounting)
5.5 L7 L6 6 (For DIN rail mounting)
L2 5
(Rail mounting hole pitch: 12.5)
L1
One-touch fitting
D side [4(A), 2(B) port] U side
Applicable tube O.D.: ø4, ø5/32"
ø6, ø1/4"
ø8, ø5/16" One-touch fitting
(Station 1) (Station n) [1(P), 3/5(E) port]
Applicable tube O.D.: ø10, ø3/8"
9.2
P 1 P 1
63.5
52.5
B 2 B 2 B 2 B 2 B 2 30.6
E 3/5 E 3/5
25.2
A 4 A 4 A 4 A 4 A 4
11.9
12
20.5
7.5
(Pitch)
P = 16
L2 = L1 – 10.5
11.8
L3 = 16 x n1 + 60 17.5 20.5
L4 = L3 + 81 + 47 x n2
L5 = (L1 – L4)/2
L6 = 16 x n1 + 48
L7 = 47 x n2 + 81.5
n1: Valve stations
n2: I/O Unit stations
Series SV2000
Dimensions
Power supply with 7/8 inch connector
EX600
Manual override
Press and turn for
the locking type
4(A) port side: Orange Light/surge voltage suppressor
2(B) port side: Green
Series
End plate Marker groove
4 x ø5.3
L4 L5
(For mounting)
16.5 47 8 L3
5.4
8
29.6
54.2
5.5
47.7
A
SY
35
106
90
109.4
B
97.5
115.5
12.2
A A A A A
Series
B B B B B
Input
Power connector SI Unit
connector Output
Connector for
(4.9)
(5.3)
FE terminal connector Valve plate
Handheld Terminal
DIN rail holding screw Digital Input Unit Communication
SV
(For DIN rail mounting) Digital Output Unit connector DIN rail holding screw
(For DIN rail mounting)
5.5 L7 L6 6
Series
2 x ø4.6
(For mounting) L2 5
(Rail mounting hole pitch: 12.5)
L1
S0700
One-touch fitting
Series
D side U side
[4(A), 2(B) port]
Applicable tube O.D.: ø4, ø5/32"
One-touch fitting
ø6, ø1/4"
ø8, ø5/16" [1(P), 3/5(E) port]
(Station 1) (Station n) Applicable tube O.D.: ø10, ø3/8"
VQC
9.2
P 1 P 1
63.5
56.6
52.5
Series
B 2 B 2 B 2 B 2 B 2
E 3/5 E 3/5
30.6
25.2
A 4 A 4 A 4 A 4 A 4
20.5
11.9
12
7.5
L3 = 16 x n1 + 60
L4 = L3 + 97.5 + 47 x n2
L5 = (L1 – L4)/2
L6 = 16 x n1 + 48
L7 = 47 x n2 + 81.5
n1: Valve stations
n2: I/O Unit stations
Series SV3000
Dimensions
Power supply with M12 connector Manual override
Press and turn for
the locking type
Light/surge voltage suppressor
4(A) port side: Orange
End plate Marker groove 2(B) port side: Green
4 x ø5.3
L4 L5 (For mounting)
Power connector 26 47 8 L3
85.1
8
5
29.6
8
5.5
54.2
47.2
A
A
35
83.8
106
90
14.3
128.8
A A A A A
B B B B B
Input SI Unit
FE terminal connector Output
connector Connector for
DIN rail holding screw Handheld Terminal
Valve plate
(5.1)
(5.3)
Digital Input Unit Digital Output Unit
(For DIN rail mounting)
Communication
2 x ø4.6 connector
(For mounting) 5.5 L7 L6
L2 5
(Rail mounting hole pitch: 12.5)
L1
P 1 P 1
82.7
B 2 B 2 B 2 B 2 B 2
63.8
37.6
36.1
E 3/5 A 4 A 4 A 4 A 4 A 4 E 3/5
11.6
13.5
(Pitch)
10
L4 = L3 + 81 + 47 x n2
L5 = (L1 – L4)/2
L6 = 20.5 x n1 + 56
L7 = 47 x n2 + 83.5
n1: Valve stations
n2: I/O Unit stations
Series SV3000
Dimensions
Power supply with 7/8 inch connector Manual override
EX600
Press and turn for
the locking type Light/surge voltage suppressor
4(A) port side: Orange
End plate Marker groove 2(B) port side: Green 4 x ø5.3
Series
L4 L5 (For mounting)
16.5 47 8 L3
8
5
8
29.6
5.5
54.2
47.2
A
A
35
83.8
106
90
SY
B
14.3
128.8
A A A A A
Series
B B B B B
Input SI Unit
Power connector connector Output
connector Connector for
Handheld Terminal
FE terminal Valve plate
(5.1)
(5.3)
Digital Input Unit Digital Output Unit Communication
SV
DIN rail holding screw connector
(For DIN rail mounting) 5.5 L7 L6
Series
L2 5
2 x ø4.6
(For mounting) (Rail mounting hole pitch: 12.5)
L1
S0700
Series
D side One-touch fitting U side
[4(A), 2(B) port] One-touch fitting
Applicable tube O.D.: ø6, ø1/4" [1(P), 3/5(E) port]
(Station 1) (Station n)
ø8, ø5/16" Applicable tube O.D.: ø12, ø3/8"
ø10, ø3/8"
VQC
P 1 P 1
82.7
B 2 B 2 B 2 B 2 B 2
Series
63.8
71.3
37.6
36.1
E 3/5 A 4 A 4 A 4 A 4 A 4 E 3/5
11.6
13.5
10
L4 = L3 + 97.5 + 47 x n2
L5 = (L1 – L4)/2
L6 = 20.5 x n1 + 56
L7 = 47 x n2 + 83.5
n1: Valve stations
n2: I/O Unit stations
SS0750 08 C4 SD6Q 2 N 1 B
Valve stations
Symbol Stations Option
01 1 station Symbol Option
Nil None
···
···
24 Note) 24 stations B Note 2) With back pressure check valve (All stations)
Note) The maximum number D With DIN rail (Rail length: Standard)
of stations depends on D0 Without DIN rail (with bracket)
the wiring specifications. Dl Note 3) With DIN rail (Rail length specified, l: Stations)
K Note 4) Special wiring specification (Except double wiring)
N With name plate
Cylinder port size R External pilot
Symbol Port size S Built-in silencer
C2 With ø2 One-touch fitting Note 1) When multiple symbols are specified, indicate them
C3 With ø3.2 One-touch fitting alphabetically. Example) “-BKN”
Metric
C4 With ø4 One-touch fitting Note 2) When a back pressure check valve is used only for
CM Mixed sizes and with port plug Note) specified station, specify the back pressure check valve
N1 With ø1/8" One-touch fitting part number, and specify the station number to which the
valve is mounted, on the manifold specification sheet.
N3 With ø5/32" One-touch fitting Inch
Note 3) Specified station number shall be longer than manifold
NM Mixed sizes and with port plug Note) station number.
Note) Indicate the sizes on the manifold specification sheet Note 4) When single wiring and double wiring are mixed, specify
in the case of “CM” and “NM”. wiring type of each station on the manifold specification
sheet.
Note 5) When “Without SI Unit” is specified, “With DIN rail (D)”
SI Unit specifications cannot be selected.
Max. number of
Max. number
Symbol Protocol Stations stations for special
of solenoids I/O Unit stations
wiring specification
SD60 Without SI Unit Nil None
SD6Q DeviceNet™ 1 1 station
···
···
SD6N PROFIBUS DP
SD6V CC-Link 1 to 16 9 9 stations
24 stations Note) 32
SD6ZE EtherNet/IP™ (1 port) stations O Without SI Unit, the symbol is nil.
SD6EA EtherNet/IP™ (2 ports) O SI Unit is not included in I/O Unit stations.
O When I/O Unit is selected, it is shipped
SD6D EtherCAT®
separately and assembled by users.
SD6F PROFINET Refer to the attached operation manual for
OT he maximum number of stations depends on the number of solenoids. mounting method.
Add the option symbol “-K” when the combination of single wiring and double wiring is
specified.
O When “Without SI Unit” is specified, a valve plate which connects the manifold and SI SI Unit output polarity
Unit, is not mounted. Refer to page 65 for mounting method.
O When “Without SI Unit” is specified, I/O Unit cannot be mounted. Nil Positive common
Note) Up to 24 stations due to the structure of the manifold. Note the maximum number N Negative common
of stations is 24 for single wiring, too. O Without SI Unit, the symbol is nil.
47
Series S0700
EX600
5 Port Solenoid Valve
EX600
Example
Digital Input Unit
EX600-DXPD
2-position single
Digital Output Unit
Series
S0710-5
End plate Note) EX600-DYPB
EX600-ED2 SI Unit Note) 2-position double
EX600-SDN1A S0720-5
Blanking plate
SS0700-10A-1
SY
Series
14 14 14 14 14 14 14
D side U side
SV
• Digital Input/Output Unit ········ Page 9
1 2 3 4 5 6 7 8 Valve stations
• Analog Input Unit ··················· Page 10
• Analog Output Unit ················ Page 10 1 2 I/O Unit Note)
Series
• Analog Input/Output Unit ······· Page 10 stations
S0700
* EX600-DXPD · · · · · · · · ········· 1 set I/O Unit part number (Station 1)
Enter in order starting from the first station on the D side.
* EX600-DYPB · · · · · · · · ········· 1 set I/O Unit part number (Station 2)
The asterisk denotes the symbol for assembly. Note) Do not enter the SI Unit part number and the end plate part number together.
Prefix it to the part numbers of the solenoid valve etc.
Series
How to Order Valves
VQC
S07 1 0 5
Series
Type of actuation Coil voltage
2-position single 4-position dual 3-port valve 5 24 VDC
(N.C. + N.C.)
(A)4 2(B) [Exhaust center]
4(A) 2(B) Function
1 A Symbol Type
Nil Standard
(R1)51 3(R2) 5(R1) 3(R2)
R External pilot Note)
(P)
1(P) Note) Not applicable for dual 3-port valves
4(A) 2(B)
2 B
4(A) 2(B)
C
5(R1) 3(R2)
1(P)
48
Series S0700
Dimensions
Power supply with M12 connector Indicator light
L1
(5.25) L2 (Rail mounting hole pitch: 12.5)
L4
5.5 L7 L6 4.4
26 47 8 (n – 1) x 8.5 12.8
1.5
Power connector Marker groove 1.5
8.5
Manual
(5.5)
override
(35)
14 14 14 14 14 14 14 14
106
90
62
72
(51.8)
(39)
12 12 12 12 12
8
5
≈4
Valve plate
FE terminal SI Unit Communication connector
2 x M4 Mounting hole 4 x M4 Mounting hole
Digital Output Unit Connector for Handheld Terminal
End plate Output connector L3 L5
Input connector Digital Input Unit
8
11.5
60
33.6
17.5
6.5
9.6
(12)
8.5 17.2
(7.5)
Dimensions
Power supply with 7/8 inch connector
EX600
Indicator light
L1
(5.25) L2 (Rail mounting hole pitch: 12.5)
L4
Series
5.5 L7 L6 4.4
(5.5)
SY
(35)
14 14 14 14 14 14 14 14
106
Series
90
62
72
(51.8)
(39)
12 12 12 12 12
8
5
≈4
Valve plate
FE terminal SI Unit
Communication connector
SV
4 x M4 Mounting hole
2 x M4 Mounting hole
Digital Output Unit Connector for Handheld Terminal
Series
End plate Output connector L3 L5
Input connector Digital Input Unit
S0700
C8, N9: 3(R) port
C8: ø8 One-touch fitting
N9: ø5/16" One-touch fitting
Series
D side Station 1 2 3 4 5 6 7 8 n U side
11.5
8
60
VQC
33.6
17.5
Series
6.5
9.6
(12)
(7.5)
VV5QC 1 1 08 C6 SD6Q 2 N 1
Series VQC1000
Option
Base mounted plug-in
Nil None
Valve stations B Note 2) With back pressure check valve (All stations)
Symbol Stations
D With DIN rail (Rail length: Standard)
D0 Without DIN rail (with bracket)
01 1 station
Dl Note 3) With DIN rail (Rail length specified, l: Stations)
···
···
···
of solenoids
wiring specification
9 9 stations
SD60 Without SI Unit
Note 1) Without SI Unit, the symbol is nil.
SD6Q DeviceNet™ Note 2) SI Unit is not included in I/O Unit stations.
SD6N PROFIBUS DP Note 3) When I/O Unit is selected, it is shipped separately and
SD6V CC-Link 1 to 12 assembled by users.
24 stations 24
SD6ZE EtherNet/IP™ (1 port) stations Refer to the attached operation manual for mounting method.
SD6EA EtherNet/IP™ (2 ports) Note 4) Refer to page 64 for details on enclosure.
SD6D EtherCAT®
SD6F PROFINET SI Unit output polarity
Note) The maximum number of stations depends on the number of solenoids.
Nil Positive common
Add the option symbol “-K” when the combination of single wiring and double wiring N Negative common
is specified. Note) Without SI Unit, the symbol is nil.
O When “Without SI Unit” is specified, I/O Unit cannot be mounted.
O When “Without SI Unit” is specified, a valve plate which connects the manifold and SI End plate type
Unit, is not mounted. Refer to page 65 for mounting method.
Nil No end plate
2 Power supply with M12 connector (Max. supplied current 2 A)
Refer to the catalog of each series for details on 3 Power supply with 7/8 inch connector (Max. supplied current 8 A)
manifold solenoid valve specifications, Common Note) Without SI Unit, the symbol is nil.
Precautions and Specific Product Precautions.
51
Series VQC1000
EX600
5 Port Solenoid Valve
EX600
Example (VV5QC11) Digital Input Unit
Digital Output Unit SI Unit Note) 2-position single
EX600-DYPB EX600-SDN1A VQC1100N-51 2-position double
EX600-DXPD
VQC1200N-51
Series
End plate Note)
EX600-ED2
A A B A B A B A B A B A
SY
• Analog Input Unit ··················· Page 10
1 2 3 4 5 6 7 8 Valve stations
• Analog Output Unit ················ Page 10
• Analog Input/Output Unit ······· Page 10 1 2 I/O Unit
Series
stations
SV
specification sheet.
The asterisk denotes the symbol for assembly.
Prefix it to the part numbers of the solenoid valve etc. Note) Do not enter the SI Unit part number and the end plate part number together.
Series
How to Order Valves
S0700
VQC 1 1 0 0 5 1
Series VQC1000
Series
Manual override
Nil: Non-locking push type
Type of actuation Coil voltage (Tool required)
2-position single 4-position dual 3-port valve
(A) 4(A) 2(B) 5 24 VDC B
(A)4 2(B) A
VQC
Note)
1 A
(R1)5 1 3(R2) 5(R1) 1(P) 3(R2) Function
Series
(P) N.C. N.C. Nil Standard (0.4 W)
2-position double (Metal) 4-position dual 3-port valve B Quick response type (0.95 W) B: Locking type
(A)4 2(B) (B) 4(A) 2(B)
High pressure type (Tool required)
Note) K Note 2)
(1.0 MPa, 0.95 W)
B B
N Note 3) Negative common A
(R1)5 1 3(R2)
(P)
5(R1) 1(P) 3(R2) R Note 4) External pilot
N.O. N.O.
2 Note 1) When multiple symbols are specified,
2-position double (Rubber) 4-position dual 3-port valve indicate them alphabetically. However,
(A)4 2(B) (C) 4(A) 2(B)
combination of “B” and “K” is not
Note)
possible. C: Locking type
C Note 2) Only metal seal type (Manual)
(R1)5 1 3(R2) 5(R1) 1(P) 3(R2)
Note 3) When negative common is specified
(P) N.C. N.O. for the SI Unit, select and mount a
valve of negative common. B
3-position closed center Note) Only rubber seal type A
Note 4) Not applicable for dual 3-port valves
(A)4 2(B)
3
(R1)5 1 3(R2) Seal type D: Slide locking type
(P) 0 Metal seal (Manual)
3-position exhaust center 1 Rubber seal
(A)4 2(B)
4
(R1)5 1 3(R2)
(P)
5
(R1)5 1 3(R2)
(P)
52
Series VQC1000
Dimensions
Power supply with M12 connector
L1
(5.25) L2 (Rail mounting hole pitch: 12.5)
L4
5.5 L7 L6
26 47 8 28
Communication
connector 1.5 1.5 Indicator light
P = 10.5
(12) 85 Marker groove
Power connector Manual override
A A B A B A B A B A B A
93.5
106
71
90
66
75
(51.8)
(40)
(5.5)
(35)
8
≈2
Valve plate
17.5
R R
11.5
63.5
62.5
56.6
3 3
X X
40.5
B B B B B B B B
12 12
P P
25
1A A A A A A A A 1
18.5
7.5
9.5
7.5
(12)
L2 = L1 – 10.5
L3 = 10.5 x n1 + 65.5
L4 = L3 + 81 + 47 x n2
L5 = (L1 – L4)/2
L6 = 10.5 x n1 + 45
L7 = 47 x n2 + 89.8
n1: Valve stations
n2: I/O Unit stations
Dimensions
Power supply with 7/8 inch connector
EX600
L1
(5.25) L2 (Rail mounting hole pitch: 12.5)
L4
Series
5.5 L7 L6
26 47 8 28
Communication
connector 1.5 1.5 Indicator light
P = 10.5
(12) Marker groove Manual override
SY
A A B A B A B A B A B A
93.5
106
Series
71
90
66
75
(51.8)
(40)
8
(5.5)
(35)
Valve plate
≈2
17.5
SV
Power connector Output
FE terminal connector SI Unit
Series
Digital Input Unit L3 L5
2 x M4 Mounting hole
Digital Output Unit
Input connector
End plate
S0700
D side Station 1 2 3 4 5 6 7 8 n U side
C8 [3(R) EXH port]
DIN rail clamping screw
C8: ø8 One-touch fitting
DIN rail clamping screw
Series
8
R R
11.5
63.5
62.5
56.6
3 3
X X
40.5
B B B B B B B B
12 12
P P
25
VQC
1A A A A A A A A 1
18.5
7.5
9.5
(12)
(7.5)
Series
C8 [1(P) SUP port]
C3: ø3.2 One-touch fitting
C4: ø4 One-touch fitting C8: ø8 One-touch fitting
C6: ø6 One-touch fitting 20.5
M5: M5 thread P = 10.5 34
L2 = L1 – 10.5
L3 = 10.5 x n1 + 65.5
L4 = L3 + 97.5 + 47 x n2
L5 = (L1 – L4)/2
L6 = 10.5 x n1 + 45
L7 = 47 x n2 + 89.8
n1: Valve stations
n2: I/O Unit stations
VV5QC 2 1 08 C8 SD6Q 2 N 1
Series VQC2000
Option
Nil None
Base mounted plug-in
B Note 2) With back pressure check valve (All stations)
D Note 3) With DIN rail (Rail length: Standard)
Stations D0 Without DIN rail (with bracket)
Symbol Stations Dl Note 4) With DIN rail (Rail length specified, l: Stations)
01 1 station KNote 5) Special wiring specification (Except double wiring)
N With name plate
···
···
···
EX600
VQC 2 1 0 0 5 1
Series VQC2000 Manual override
Series
Nil: Non-locking push type
(Tool required)
Type of actuation
2-position single 4-position dual 3-port valve
(A)4 2(B) (A) 4(A) 2(B)
Note)
1 A
SY
(R1)5 1 3(R2) 5(R1) 1(P) 3(R2)
(P) N.C. N.C. B: Locking type
Series
2-position double (Metal) 4-position dual 3-port valve (Tool required)
(A)4 2(B) (B) 4(A) 2(B)
Note)
B
(R1)5 1 3(R2) 5(R1) 1(P) 3(R2)
(P) N.O. N.O.
2
2-position double (Rubber) 4-position dual 3-port valve
(C) 4(A) 2(B)
SV
(A)4 2(B) C: Locking type
Note)
C (Manual)
Series
(R1)5 1 3(R2) 5(R1) 1(P) 3(R2)
(P) N.C. N.O.
3-position closed center Note) Only rubber seal type
(A)4 2(B)
S0700
Seal type D: Slide locking type
(R1)5 1 3(R2)
(P) 0 Metal seal (Manual)
1 Rubber seal
3-position exhaust center
Series
(A)4 2(B)
4 Function
(R1)5 1 3(R2) Nil Standard (0.4 W)
(P)
B Quick response type (0.95 W)
3-position pressure center K Note 2) High pressure type (1.0 MPa, 0.95 W)
VQC
(A)4 2(B) N Note 3) Negative common
5 R Note 4) External pilot
Series
Note 1) When multiple symbols are specified,
(R1)5 1 3(R2) indicate them alphabetically. However,
(P)
combination of “B” and “K” is not possible.
Note 2) Only metal seal type
Note 3) When negative common is specified for SI
Unit, select and mount a valve of negative
common.
Note 4) Not applicable for dual 3-port valves
Coil voltage
5 24 VDC
56
Series VQC2000
Dimensions
Power supply with M12 connector
L1
(5.25) L2 (Rail mounting hole pitch: 12.5)
L4
5.5 L7 L6
26 47 8 38.5
(12) 85 Communication
1 P = 16 1 Indicator light
connector
74 0.9 Manual override
Power connector Marker groove
120
105.5
106
71
90
80
(51.8)
(53.5)
(5.5)
(35)
8
17.5
≈ 3.5
≈ 5.5
FE terminal 4 x M5
L3 L5 Mounting hole
2 x M4 Mounting hole Valve plate
End plate SI Unit
Input connector Connector for Handheld Terminal
Digital Input Unit Digital Output Unit C10 [3(R) EXH port] (Double sided type: C12)
C10: ø10 One-touch fitting
Output connector
(C12: ø12 One-touch fitting)
R R
8
11.5
76.5
3 3
X
56.6
49.5
B B B B B B B B
12 12
P P
30
25
1
A A A A A A A A 1
10
13.5
(12)
(7.5)
Dimensions
Power supply with 7/8 inch connector
EX600
L1
(5.25) L2 (Rail mounting hole pitch: 12.5)
L4
Series
5.5 L7 L6
26 47 8 38.5
Communication Indicator light
(12) 74 connector 1 P = 16 1
Manual override
0.9
Marker groove
SY
Series
120
105.5
106
71
90
80
(51.8)
(53.5)
(5.5)
(35)
8
17.5
≈ 3.5
≈ 5.5
4 x M5
SV
Power connector L3 L5 Mounting hole
FE terminal
Series
Valve plate
2 x M4 Mounting hole SI Unit
End plate Connector for Handheld Terminal
Input connector Digital Output Unit C10 [3(R) EXH port] (Double sided type: C12)
C10: ø10 One-touch fitting
Digital Input Unit Output connector (C12: ø12 One-touch fitting)
S0700
D side Station 1 2 3 4 5 6 7 8 n U side
DIN rail clamping screw
C10 [3(R) EXH port] DIN rail clamping screw
11.5
Series
C10: ø10 One-touch fitting
R R
8
76.5
3 3
X
56.6
49.5
B B B B B B B B
12 12
P P
30
25
VQC
1
A A A A A A A A 1
10
13.5
(12)
(7.5)
Series
C10: ø10 One-touch fitting P = 16 45
VV5QC 4 1 16 02 SD6Q 2 N 1
Series VQC4000
Option
Base mounted plug-in Nil None
Special wiring specification
K Note) (Except double wiring)
Valve stations Note) When single wiring and double wiring
01 1 station are mixed, specify wiring type of each
station on the manifold specification
···
···
···
···
Cylinder port size 9 9 stations
C6 With ø6 One-touch fitting Note 1) Without SI Unit, the symbol is nil.
C8 With ø8 One-touch fitting Note 2) SI Unit is not included in I/O Unit stations.
C10 With ø10 One-touch fitting Note 3) When I/O Unit is selected, it is shipped
C12 With ø12 One-touch fitting separately and assembled by users.
Refer to the attached operation manual
N7 For ø1/4"
for mounting method.
N9 For ø5/16" Note 4) Refer to page 64 for details on enclosure.
N11 For ø3/8"
02 1/4
03 3/8 SI Unit output polarity
B Bottom ported Rc1/4 Nil Positive common
CM Mixed sizes N Negative common
Note) Without SI Unit, the symbol is nil.
Thread type
Nil Rc End plate type
F G
Nil No end plate
N NPT
2 Power supply with M12 connector (Max. supplied current 2 A)
T NPT/NPTF
3 Power supply with 7/8 inch connector (Max. supplied current 8 A)
Note) Without SI Unit, the symbol is nil.
SI Unit specifications
Max. number of
Max. number
Protocol Stations stations for special
of solenoids
wiring specification
SD60 Without SI unit
SD6Q DeviceNet™
SD6N PROFIBUS DP
SD6V CC-Link 1 to 12
16 stations 24
SD6ZE EtherNet/IP™ (1 port) stations
SD6EA EtherNet/IP™ (2 ports)
SD6D EtherCAT®
SD6F PROFINET
Note) The maximum number of stations depends on the number of solenoids.
Add the option symbol “-K” when the combination of single wiring and double
wiring is specified.
O When “Without SI Unit” is specified, I/O Unit cannot be mounted.
O When “Without SI Unit” is specified, a valve plate which connects the manifold and SI
Unit, is not mounted. Refer to page 65 for mounting method.
A 59
Series VQC4000
EX600
5 Port Solenoid Valve
EX600
Example (VV5QC41-SD6)
VV5QC41-0502SD6Q2N2···1 set (S kit 5-station manifold base part number)
Digital Input Unit Digital Output Unit 2-position single
*VQC4100-51·················3 sets (2-position single part number)
EX600-DXPD EX600-DYPB VQC4100-51 (3 sets)
*VQC4200-51·················2 sets (2-position double part number)
Series
End plate Note) SI Unit Note) 2-position double *EX600-DXPD················1 set I/O Unit part number (Station 1)
EX600-ED2 EX600-SDN1A VQC4200-51 (2 sets) *EX600-DYPB················1 set I/O Unit part number (Station 2)
* The asterisk denotes the symbol for assembly.
A A A A B A B
A A A A A
* Prefix it to the part numbers of the valve etc.
· The valve arrangement is numbered as the 1st station from the D side.
D side U side · Under the manifold part number, state the valves to be mounted, then the I/O Units in
order from the 1st station as shown in the figure above. If the arrangement becomes
SY
complicated, specify on a manifold specification sheet.
B B
Note) Do not enter the SI Unit part number and the end plate part number together.
Series
1 2 I/O Unit stations 1 2 3 4 5 Valve stations
SV
VQC 4 1 0 0 5 1
Series
Series VQC4000 Manual
Nil B C
Non-locking push type Push-turn locking type Turn locking type
S0700
Type of actuation
(Tool required) (Tool required) (Manual)
2-position single 3-position closed center
(A) (B) (A) (B)
4 2 4 2
1 3
Series
5 1 3 5 1 3
(R1)(P)(R2) (R1)(P)(R2)
4 2 4 2
4
VQC
5 1 3 5 1 3
(R1)(P)(R2) (R1)(P)(R2)
2 Light/surge voltage suppressor
2-position double 3-position pressure center
(A) (B) Nil With
Rubber
(A)(B)
4 2
4 2
E
Series
5 Without light, with surge voltage suppressor
5 1 3 5 1 3
(R1)(P)(R2) (R1)(P)(R2)
60 A
Series VQC4000
Dimensions
Power supply with M12 connector
L2
5.5 47 m + 86 L1
Output connector
Digital Input Unit
Digital Output Unit
(n – 1) x 25 65.5 6.5
Communication
Input connector connector
Indicator light
Power connector SI Unit Manual override 25
FE terminal
9
(163)
143
163
106
90
78.5
9
Marker groove
.5
26 47 m 47
10
Valve plate
R4
2 x M4 Mounting hole
Connector for Handheld Terminal
End plate
15.7
101.2
8
95.5
2 B 2 B 2 B 2 B 2 B 2 B 2 B 2 B
77.3
11.5
72
56.6
43.5
42.7
4 A 4 A 4 A 4 A 4 A 4 A 4 A 4 A
20.6
21.5
11.5
Formulas
L1 = 25n + 106
L2 = 25n + 184
* L2 is the dimension without I/O Unit. Add 47 mm for each additional I/O Units.
* “m” is number of I/O Units.
61
Series VQC4000
EX600
5 Port Solenoid Valve
Dimensions
Power supply with 7/8 inch connector
EX600
16.5 L2
5.5 47 m + 86 L1
Series
Communication
Digital connector
Output Unit (n – 1) x 25 65.5 6.5
Output
Indicator light
Digital Input Unit connector SI Unit
Manual override 25
Input connector
SY
9
Series
(163)
143
163
106
90
78.5
9
Marker groove
SV
.5
47 m Valve plate
10
Power connector 26 47
R4
Series
FE terminal Connector for Handheld Terminal
2 x M4 Mounting hole
End plate
3/4 [3(R) port]
D side Station 1 2 3 4 5 6 7 8 n U side
3/4: 3/4" Female thread (Rc, G, NPT/NPTF)
S0700
1/2 [1(P) port]
1/2: 1/2" Female thread (Rc, G, NPT/NPTF)
11.5
Series
15.7
101.2
8
95.5
2 B 2 B 2 B 2 B 2 B 2 B 2 B 2 B
77.3
72
56.6
43.5
42.7
4 A 4 A 4 A 4 A 4 A 4 A 4 A 4 A
VQC
20.6
21.5
11.5
Series
1/8 (Pilot EXH port)
1/8: 1/8" Female thread (Rc, G, NPT/NPTF) 38.7
25 65.5 (6.5)
Formulas
L1 = 25n + 106
L2 = 25n + 184
* L2 is the dimension without I/O Unit. Add 47 mm for each additional I/O Units.
* “m” is number of I/O Units.
62
EX600
5 Port Solenoid Valve
Series VQC5000 RoHS
VV5QC 5 1 12 03 SD6Q 2 N 1
Series VQC5000
Option
Base mounted plug-in Nil None
Special wiring specification
K Note) (Except double wiring)
Valve stations Note) When single wiring and double wiring
01 1 station are mixed, specify wiring type of each
station on the manifold specification
···
···
12 12 stations sheet.
···
···
B Bottom ported Rc1/4
9 9 stations
CM Mixed sizes
Note 1) Without SI Unit, the symbol is nil.
Note 2) SI Unit is not included in I/O Unit stations.
Note 3) When I/O Unit is selected, it is shipped
Thread type separately and assembled by users.
Nil Rc Refer to the attached operation manual
F G for mounting method.
N NPT Note 4) Refer to page 64 for details on enclosure.
T NPTF
A 62-1
Series VQC5000
EX600
5 Port Solenoid Valve
EX600
Example (VV5QC51-SD6)
VV5QC51-0503SD6Q2N2···1 set (S kit 5-station manifold base part number)
*VQC5100-51·················3 sets (2-position single part number)
Digital Input Unit Digital Output Unit 2-position single
*VQC5200-51·················2 sets (2-position double part number)
VQC5100-51 (3 sets)
Series
EX600-DXPD EX600-DYPB
*EX600-DXPD················1 set I/O Unit part number (Station 1)
End plate Note) SI Unit Note) 2-position double *EX600-DYPB················1 set I/O Unit part number (Station 2)
EX600-ED2 EX600-SDN1A VQC5200-51 (2 sets)
* The asterisk denotes the symbol for assembly.
A A A B A B A
* Prefix it to the part numbers of the valve etc.
D side U side · The valve arrangement is numbered as the 1st station from the D side.
· Under the manifold part number, state the valves to be mounted, then the I/O Units in
A A A A A
order from the 1st station as shown in the figure above. If the arrangement becomes
SY
complicated, specify on a manifold specification sheet.
I/O Unit Note) Do not enter the SI Unit part number and the end plate part number together.
1 2
Series
stations
B B B B B
1 2 3 4 5 Valve stations
SV
VQC 5 1 0 0 5 1
Series
Series VQC5000 Manual
Nil B C
Non-locking push type Push-turn locking type Turn locking type
S0700
Type of actuation
(Tool required) (Tool required) (Manual)
2-position single 3-position closed center
(A) (B) (A) (B)
4 2 4 2
1 3
Series
5 1 3 5 1 3
(R1)(P)(R2) (R1)(P)(R2)
4 2 4 2
4
VQC
5 1 3 5 1 3
(R1)(P)(R2) (R1)(P)(R2)
2
2-position double 3-position pressure center
(A) (B)
Rubber
(A)(B)
4 2 4 2
Light/surge voltage suppressor
Series
5
Nil With
5 1 3 5 1 3
(R1)(P)(R2) (R1)(P)(R2) E Without light, with surge voltage suppressor
3-position double check
(A) (B)
4 2
Note)
Coil voltage
6
5 1 3
5 24 VDC
(R1)(P)(R2)
Note) F o r d o u b l e c h e c k
type, refer to the Function
WEB catalog or the Nil Standard (0.95 W)
VQ4000/5000 series
Y Note 1) Low wattage type (0.4 W)
catalog (CAT. ES11-
104). R Note 2) External pilot
Note 1) When the power is energized continuously,
refer to “Specific Product Precautions 1” in
the WEB catalog or the VQC4000/5000
series catalog (CAT.ES11-104).
Seal type Note 2) F or details about external pilot type, refer to
0 Metal seal the WEB catalog or the VQ4000/5000
1 Rubber seal series catalog (CAT.ES11-104). In addition,
external pilot type cannot be combined with
a double check spacer.
* When multiple symbols are specified, indicate
them alphabetically.
62-2 A
Series VQC5000
Dimensions
Power supply with M12 connector
L2
5.5 47n2 + 82.5 L1 10
4.4 8
26 47 x n2 47 59.5 P = 41
End plate
29.5
107.8
9
106
90
A A A A A
46.8
R1
184.5
180
179
179
5
126.8
P
1
8
I/O Unit
59.2
R2
PE
3
9
FE terminal Communication B B B B B
29.5
connector
3/4"
D side Stations 1 2 3 4 5 6 n U side 1(P), 5(R1), 3(R2) port
117
2 B 2 B 2 B 2 B 2 B 22 B
B
56.6
55.5
69
3
54
1
51
12 X
4 A 4 A 4 A 4 A 4 A 44 A
A
22
17
19
34
1/2" 69.5 34.5
1(P) port 48
3/8", 1/2" 68.5 1/8"
4(A), 2(B) port External pilot port
Formula:
L1 = 41n + 77
L2 = 41n + 175
* L2 dimension: Without I/O unit For additional I/O unit, add 47 mm.
* n2: I/O unit stations
A 62-3
Series VQC5000
EX600
5 Port Solenoid Valve
Dimensions
Power supply with 7/8 inch connector
EX600
Series
16.5 L2
5.5 47n2 + 82.5 L1 10
8
26 47 x n2 47 59.5 P = 41
End plate
47
SY
Manual override
Series
(3-position: Metal seal type)
(Single, Double, 3-position: Rubber seal type)
A B A B A B A B A
29.5
107.8
9
106
90
A A A A A
46.8
R1
184.5
180
179
179
5
126.8
P
1
8
I/O Unit
59.2
R2
PE
3
9
FE terminal Communication
SV
29.5
B B B B B
connector
Series
Indicator light
Communication 21
Power connector connector 47.5
7/8" connector (5 pins)
SI Unit Valve plate
1/8"
PE. port
S0700
3/4"
D side Stations 1 2 3 4 5 6 n U side 1(P), 5(R1), 3(R2) port
Series
1/2" M5 x 0.8 Ground screw
3(R) port
11.5
8
117
2 B 2 B 2 B 2 B 2 B 22 B
B
VQC
56.6
55.5
69
3
54
1
51
12 X
4 A 4 A 4 A 4 A 4 A 44 A
A
17
22
Series
34
19
Formula:
L1 = 41n + 77
L2 = 41n + 175
* L2 dimension: Without I/O unit For additional I/O unit, add 47 mm.
* n2: I/O unit stations
62-4 A
Series EX600
Specific Product Precautions 1
Be sure to this read before handling. Refer to the back cover for Safety Instructions.
For 3/4/5 Port Solenoid Valve Precautions, refer to “Handling Precautions for SMC
Products” and the Operation Manual on SMC website, http://www.smcworld.com
Warning Caution
1. Do not use beyond the specification range. 3. Observe the tightening torque range.
Using beyond the specification range can cause a fire, mal- Tightening outside of the allowable torque range will likely
function, or damage to the system. damage the screw.
Check the specifications before operation. IP67 cannot be guaranteed if the screws are not tightened to
2. When using for an interlock circuit: the specified torque.
• Provide a multiple interlock system which is oper- 4. When lifting a large size Manifold Solenoid Valve
ated by another system (such as mechanical pro- Unit, take care to avoid causing stress to the valve
tection function). connection joint.
• Perform an inspection to confirm that it is working The connection joint with the Unit may be damaged.
properly. Because the product may be heavy, carrying and installation
Otherwise, this may cause possible injuries due to malfunction. should be performed by more than one operator to avoid
strain or injury.
Caution 5. When placing a manifold, mount it on a flat surface.
Torsion in the whole manifold can lead to trouble such as air
1. When applicable to UL, use a Class 2 power supply leakage or contact failure.
unit conforming to UL1310 for direct current power
supply.
2. Use within the specified voltage range. Wiring
Using beyond the specified voltage range is likely to cause the
product to be damaged or to malfunction.
3. Do not install in places where it can be used as a Caution
foothold. 1. Provide the grounding to maintain the safety of the
Applying any excessive load such as stepping on the product reduced wiring system and to improve the noise
by mistake or placing a foot on it, will cause it to break. immunity.
4. Keep the surrounding space free for maintenance. Provide a specific grounding as close to the Unit as possible
When designing a system, take into consideration the amount to minimize the distance to grounding.
of free space needed for performing maintenance.
2. Avoid repeatedly bending or stretching the cable
5. Do not remove the name plate. and applying a heavy object or force to it.
Improper maintenance or incorrect use of Operation Manual
Wiring applying repeated bending and tensile stress to the
can cause equipment failure or malfunction. Also, there is a
cable can break the circuit.
risk of losing conformity with safety standards.
6. Beware of inrush current when the power supply is 3. Avoid miswiring.
turned on. If miswired, there is a danger of malfunction or damage to the
reduced wiring system.
Some connected loads can apply an initial charge current
which will trigger the over current protection function, causing 4. Do not wire while energizing the product.
the Unit to malfunction. There is a danger of malfunction or damage to the reduced
wiring system or input/output device.
5. Avoid wiring the power line and high pressure line
Mounting in parallel.
Noise or surge produced by signal line resulting from the pow-
Caution er line or high pressure line could cause a malfunction.
Wiring of the reduced wiring system or input/output device
1. When handling and assembling Units: and the power line or high pressure line should be separated
• Do not touch the sharp metal parts of the connec- from each other.
tor or plug. 6. Check for the wiring insulation.
• Do not apply excessive force to the Unit when dis- Defective insulation (contact with other circuits, improper insu-
assembling. lation between terminals, etc.) may cause damage to the re-
The connecting portions of the Unit are firmly joined with seals. duced wiring system or input/output device due to excessive
• When joining Units, take care not to get fingers voltage or current.
caught between Units.
Injury can result.
2. Do not drop, bump, or apply excessive impact.
Otherwise, this can cause damage, equipment failure or mal-
function.
63
Series EX600
Specific Product Precautions 2
Be sure to this read before handling. Refer to the back cover for Safety Instructions.
For 3/4/5 Port Solenoid Valve Precautions, refer to “Handling Precautions for SMC
Products” and the Operation Manual on SMC website, http://www.smcworld.com
Caution Caution
7. When the reduced wiring system is installed in 3. Do not use in an environment where oil and chemi
machinery/equipment, provide adequate protection cals are used.
against noise by using noise filters etc. Operating in environments with coolants, cleaning solvents,
Noise in signal lines may cause a malfunction. various oils or chemicals may cause adverse effects (damage,
malfunction) to the Unit even in a short period of time.
8. When connecting wires of input/output device or
Handheld Terminal, prevent water, solvent or oil 4. Do not use in an environment where the product
from entering inside from the connecter section. could be exposed to corrosive gas or liquid.
Otherwise, this can cause damage, equipment failure or mal- This may damage the Unit and cause it to malfunction.
function. 5. Do not use in locations with sources of surge gen
9. Avoid wiring patterns in which excessive stress is eration.
applied to the connector. Installation of the Unit in an area around the equipment
This may cause equipment failure or malfunction due to con- (electromagnetic lifters, high frequency induction furnaces,
tact failure. welding machine, motors, etc.), which generates the large
surge voltage could cause to deteriorate an internal circuitry
element of the Unit or result in damage. Implement counter-
Operating Environment measures against the surge from the generating source, and
avoid touching the lines with each other.
64
Series EX600
Specific Product Precautions 3
Be sure to this read before handling. Refer to the back cover for Safety Instructions.
For 3/4/5 Port Solenoid Valve Precautions, refer to “Handling Precautions for SMC
Products” and the Operation Manual on SMC website, http://www.smcworld.com
Warning Warning
1. Do not perform operation or setting with wet hands. 1. Do not disassemble, modify (including circuit board
There is a risk of electrical shock. replacement) or repair this product.
<Handheld Terminal> Such actions are likely to cause injuries or equipment failure.
2. Do not apply pressure to the LCD. 2. When an inspection is performed,
There is a possibility of the crack of LCD and injuring. • Turn off the power supply.
• Stop the air supply, exhaust the residual pressure
3. The forced input/output function is used to change
in piping and verify that the air is released before
the signal status forcibly. When operating this func-
performing maintenance work.
tion, be sure to check the safety of the surround-
Unexpected malfunction of system components and injury
ings and installation. can result.
This may cause, injuries or equipment damage.
4. Incorrect setting of parameters can cause a mal-
function. Be sure to check the settings before use.
Caution
This may cause injuries or equipment damage. 1. When handling and replacing Units:
• Do not touch the sharp metal parts of the connec-
Caution tor or plug.
• Do not apply excessive force to the Unit when dis-
1. Use a watchmakers’ screwdriver with thin blade for assembling.
the setting of each switch of the SI Unit. The connecting portions of the Unit are firmly joined with seals.
When setting the switch, do not touch other unre- • When joining Units, take care not to get fingers
lated parts. caught between Units.
This may cause parts damage or malfunction due to a short circuit. Injury can result.
2. Provide adequate setting for the operating conditions. 2. Perform periodic inspection.
Failure to do so could result in malfunction. Unexpected malfunction in the system composition devices is
Refer to the Operation Manual for setting of the switches. likely to occur due to malfunction of machinery or equipment.
3. For details on programming and address setting, 3. After maintenance, make sure to perform an appro-
refer to the manual from the PLC manufacturer. priate functionality inspection.
The content of programming related to protocol is designed by In cases of abnormality such as faulty operation, stop opera-
the manufacturer of the PLC used. tion. Unexpected malfunction in the system composition
devices is likely to occur.
<Handheld Terminal>
4. Do not press the setting buttons with a sharp point- 4. Do not use benzine and thinner for cleaning Units.
ed object. Damage to the surface or erasure of the display can result.
Wipe off any stains with a soft cloth.
This may cause damage or equipment failure. If the stain is persistent, wipe off with a cloth soaked in a dilute
5. Do not apply excessive load and impact to the set- solution of neutral detergent and wrung out tightly, and then
ting buttons. finish with a dry cloth.
This may cause damage, equipment failure or malfunction.
Other
When the order does not include the SI Unit, a valve plate which
connects the manifold and SI Unit, is not mounted. Use attached
valve holding screws and mount the valve plate. Caution
(Tightening torque: 0.6 to 0.7 N·m)
Screw tightened parts 1. Refer to the catalog of each series for Common Pre-
Series SV: 2 places cautions and Specific Product Precautions on
Series S0700: 2 places manifold solenoid valves.
Series VQC1000: 2 places
Series VQC2000: 3 places
Series VQC4000: 4 places
Series SY: 2 places
Valve holding screw
Valve plate
\M Trademark
DeviceNet™ is a trademark of ODVA.
EtherNet/IP™ is a trademark of ODVA.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
QuickConnect™ is a trademark of ODVA.
65
These safety instructions are intended to prevent hazardous situations and/or
Safety Instructions equipment damage. These instructions indicate the level of potential hazard with
the labels of “Caution,” “Warning” or “Danger.” They are all important notes for
safety and must be followed in addition to International Standards (ISO/IEC)∗1),
and other safety regulations.
∗1) ISO 4414: Pneumatic fluid power – General rules relating to systems.
Caution indicates a hazard with a low level of risk which,
Caution: if not avoided, could result in minor or moderate injury.
ISO 4413: Hydraulic fluid power – General rules relating to systems.
IEC 60204-1: Safety of machinery – Electrical equipment of machines.
(Part 1: General requirements)
Warning indicates a hazard with a medium level of risk which,
Warning: if not avoided, could result in death or serious injury.
ISO 10218-1: Manipulating industrial robots – Safety.
etc.
Danger indicates a hazard with a high level of risk which,
Danger : if not avoided, will result in death or serious injury.
Warning Caution
1. The compatibility of the product is the responsibility of the 1. The product is provided for use in manufacturing industries.
person who designs the equipment or decides its The product herein described is basically provided for peaceful use in
specifications. manufacturing industries.
Since the product specified here is used under various operating conditions, If considering using the product in other industries, consult SMC beforehand
its compatibility with specific equipment must be decided by the person who and exchange specifications or a contract if necessary.
designs the equipment or decides its specifications based on necessary If anything is unclear, contact your nearest sales branch.
analysis and test results. The expected performance and safety assurance
of the equipment will be the responsibility of the person who has determined Limited warranty and Disclaimer/
its compatibility with the product. This person should also continuously
review all specifications of the product referring to its latest catalog Compliance Requirements
information, with a view to giving due consideration to any possibility of The product used is subject to the following “Limited warranty and Disclaimer” and
equipment failure when configuring the equipment. “Compliance Requirements”.
Read and accept them before using the product.
2. Only personnel with appropriate training should operate
machinery and equipment. Limited warranty and Disclaimer
The product specified here may become unsafe if handled incorrectly. The
assembly, operation and maintenance of machines or equipment including
1. The warranty period of the product is 1 year in service or 1.5 years after
our products must be performed by an operator who is appropriately trained
the product is delivered, whichever is first.∗2)
and experienced. Also, the product may have specified durability, running distance or
replacement parts. Please consult your nearest sales branch.
3. Do not service or attempt to remove product and machinery/ 2. For any failure or damage reported within the warranty period which is clearly our
equipment until safety is confirmed. responsibility, a replacement product or necessary parts will be provided.
1. The inspection and maintenance of machinery/equipment should only be This limited warranty applies only to our product independently, and not to any
performed after measures to prevent falling or runaway of the driven other damage incurred due to the failure of the product.
objects have been confirmed.
3. Prior to using SMC products, please read and understand the warranty terms
2. When the product is to be removed, confirm that the safety measures as and disclaimers noted in the specified catalog for the particular products.
mentioned above are implemented and the power from any appropriate
∗2) Vacuum pads are excluded from this 1 year warranty.
source is cut, and read and understand the specific product precautions A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
of all relevant products carefully. Also, even within the warranty period, the wear of a product due to the use of the vacuum pad
3. Before machinery/equipment is restarted, take measures to prevent or failure due to the deterioration of rubber material are not covered by the limited warranty.
unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of
Compliance Requirements
safety measures if the product is to be used in any of the 1. The use of SMC products with production equipment for the manufacture of
following conditions. weapons of mass destruction (WMD) or any other weapon is strictly prohibited.
1. Conditions and environments outside of the given specifications, or use 2. The exports of SMC products or technology from one country to another are
outdoors or in a place exposed to direct sunlight. governed by the relevant security laws and regulations of the countries involved
2. Installation on equipment in conjunction with atomic energy, railways, air in the transaction. Prior to the shipment of a SMC product to another country,
navigation, space, shipping, vehicles, military, medical treatment, assure that all local rules governing that export are known and followed.
combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press
applications, safety equipment or other applications unsuitable for the Caution
standard specifications described in the product catalog.
SMC products are not intended for use as instruments for legal
3. An application which could have negative effects on people, property, or metrology.
animals requiring special safety analysis. Measurement instruments that SMC manufactures or sells have not been
4. Use in an interlock circuit, which requires the provision of double interlock qualified by type approval tests relevant to the metrology (measurement) laws
for possible failure by using a mechanical protective function, and of each country. Therefore, SMC products cannot be used for business or
periodical checks to confirm proper operation. certification ordained by the metrology (measurement) laws of each country.
Revision history
Edition B ∗ EtherNet/IP™ communication protocol added. Edition D ∗ PROFINET communication protocol added. RS
∗ Analog Output Unit and Input/Output Unit added. Edition E ∗ Dual port EtherNet/IPTM product added.
∗ D-sub connector and Spring type terminal block added. ∗ Applicable solenoid valve SY7000 series added. TS
∗ Applicable solenoid valve SY3000/5000 series added.
∗ Number of pages decreased from 64 to 60. OW
Edition C ∗ EtherCAT® communication protocol added. PX
Safety Instructions Be sure to read “Handling Precautions for SMC Products” (M-E03-3) before using.