Professional Documents
Culture Documents
Prova 2015-12.ca - en
Prova 2015-12.ca - en
com
Department and cycle mechanization CFS Production scheduling in mechanical manufacturing Page 1 of 4
training unit UF2 Computer Aided Design (CAD Test date 4/12/2015
Student data
GENERALITIES
● THE TEACHER DOES NOT ANSWER ANY QUESTIONS OR COMMENTS WHILE THE TEST IS BEING TAKEN. If there is any fact that the
student wants to state about questions or answers, he/she will express it in writing next to the question, or at the end of the
sheet.
● In the event that the teacher, involuntarily, has left out a piece of data without which the exercise cannot be done, the student
will invent it (trying to make the data truthful and consistent with the rest of the drawing) and will warn in writing in a notorious
way, in very large letters on the sheet of the statement of the exercise
● Each sheet must be headed with the name and surname.
● Together with the answers, the statements must be submitted.
● Every time the mobile phone rings while the test is taking place, -0.5 points will be deducted from the grade.
● In the event that the student does not consider the previous points, there will be a decrease of one point in the grade for the previous
consideration that he does not comply with, with a maximum of -2 points.
VALUE OF ANSWERS
The name of the drawing must be: your surname + first name + today's date (year-month-day). Example:
Torregrossa Josep 2015-11-18.dwg
KEEP IN MIND
● The text of the dimensions must be inclined 15º. You must put the same dimensions and place them in the same position as those in each
drawing in the statement.
● Remember to save the drawing, periodically, in a pen, so that if, eventually, the electricity supply is cut or the computer
hangs or... you can give the teacher almost everything you have done.
● All the drawings are in their correct position, so your autocad file should look like this:
Department and cycle mechanization CFS Production scheduling in mechanical manufacturing Page 2 out of 4
training unit UF2 Computer Aided Design (CAD Test date 4/12/2015
Student data
2. Question
Department and cycle mechanization CFS Production scheduling in mechanical manufacturing Page 3 out of 4
training unit UF2 Computer Aided Design (CAD Test date 4/12/2015
Student data
training unit UF2 Computer Aided Design (CAD Test date 4/12/2015
Student data
Line of the axis of symmetry. Pay close attention to its proportions and remember that it must be drawn in green.