manufactured from RHS tube and fitted with galvanized covers. It is mounted on 2 fixed and 2 swivel castors complete with brakes. DRIVE - The drive is mounted under the table and has a base drive configuration turning a base plate on which all segments can be mounted. ELECTRICAL - The unit is fitted with a switch system including a stop/start station and a mushroom emergency stop. It will also come with 4 meters of 3 phase flex and a five (5) pin plug ready to fit to your 415 volt outlet. SAMPLE SEGMENTS - All sample segments will sit inside a bottom turntable with retaining ring and will come with handles internally or externally fitted for ease of lifting. We supply any segment configuration up to ten (10) 1/10 segments additional segments available at an extra cost. Or we can supply segments to suit GUARDING - The machine will have a opening guard around the carousel, segments and feeder protecting the operator Overall dimensions 2210L x 1400W x 1500 H from all pinch points. The guard is designed so that when it is opened it will trip a safety switch and stop the machine. If the Power 3 phase 415V 10 AMP plug guard is left open it will not start. Motor size 3 phase 415V 1.71 AMP 50HZ 0.75 KW MACHINE - All body components are manufactured from high Approx. Mass 300 (kg) grade steel. All bins, chutes, sample segments and fasteners are manufactured from 304 grade stainless steel. The main frame is painted with industrial grade hammer tone paint.