Professional Documents
Culture Documents
TDS Gypsum Board Primer EN-1
TDS Gypsum Board Primer EN-1
Advantages:
• Exceptional filling properties, fully equalizes absorbency
differences between construction materials
• Perfect one-coat finish for interior use only
PRODUCT FEATURES
Viscosity
105 ± 5 KU (ASTM D 562, 25°C)
For plaster-board surfaces and every
other interior surface such as plaster, White
Density concrete etc..
1,72 ± 0,02 Kg / L (ISO 2811)
Touch dry
Water 30-60 min
One coat
• 5-10 % for brushing
12-14 m2/L For top coat
• 10-15% for spraying
application
6-8 h
PACKAGING
White 3L 10 L
SURFACE PREPARATION
APPLICATION
PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking
paint.
To fill any cracks or holes use Visto or Acrylic Putty. Wet sanding is recommended
for the surface preparation.
STEPS OF APPLICATION
TIPS
• Application at 5-35°C and <80% RH. how much paint you will need. • Do not dispose of liquid waste into
• Tools must be cleaned immediately • Recover unused paint for re-use. After ground water table. Unused paint
after use with water and if needed, with paint application, seal the container requires special handling for safe
soapy water or detergent. and store it for future use. disposal.
• Minimize paint wastage by estimating
ADDITIONAL INFORMATION
STORAGE The above technical data, information and instructions are based on our long experience and laboratory tests and
are intended only to describe the product and determine its application. However, the end user should check the
suitability of the product for its intended use. Our company guarantees the quality of the product itself, and in any
case bears no responsibility for any damage or damage caused if the product is not used properly and in accordance
with its instructions for use. The company has the right to revise this technical data sheet without any prior notice.
5°C-38°C
Keep containers closed in a cool and dry area.
VITEX S.A., P.O. Box. 139 Imeros Topos, Aspropyrgos GR 193 00 | Τel. +30 210 5589500, Fax +30 210 4835007 | www.vitex.gr Version: 07.2022 (This datasheet supersedes all previous versions)