Professional Documents
Culture Documents
WT Microlene HFM1 UB Datasheet
WT Microlene HFM1 UB Datasheet
Under Bench
High Flow Filtration System
Model Number: HF1M
Applications
Ideal for reducing unwanted contaminants affecting
taste and odour of your drinking water in the home or
workplace. Typically installed where there is an existing tap.
System filters all cold water supplied through the tap.
TECHNICAL DATASHEET
Microlene High Flow Under Bench Filtration System
Specifications
High Flow System
Model Number HF1M
Maximum Flow 9.5 lpm
Maximum Temperature 0 - 38⁰C
Pressure 200 - 680kPa
STAGE 1 & 2
Micron 1
Purifies water
Connection Twist Removes particles
Cartridge Capacity 65,000 litres Removes sediment,
Cartridge Replacement 6 monthly rust and silt
All Cconnections 1/2" BSP
Certification STAGE 3
Cartridge and Mounting Head AS/NZS 4020:2018 Chlorine, chloramine,
All other components and fittings bad taste and
WaterMark
that touch water odour reduction
Replacement Cartridge HF1M-R
STAGE 4
Mounting Removes fine
Vertical 500mm H x 215mm W particles, THM's
Horizontal 215mm W x 500mm H and Cysts
Aerator & cold / hot outlet
STAGE 5
Filtered water outlet
Water softening beads
reducing scaling due
to water hardness
3 Way Mixer Tap Mounting head (screws supplied) Click to add text
¼” John Guest flexible tubing
Filtered water leverJohn Guest Smart Tee ½” BSP Brass male to male adaptor
(isolating and
450mm ½” Braided hose for back*Spare - ½” BSP Brass male to
flow valve) Spare ½” BSP Brass male to male
Click to add text cartridge to existing tap / faucet male
½” BSP adaptors
Male & Female & adaptor provided for flexibility & ease
G¼” John Guest tube of different installation scenarios
connection
3 x Braided hoses (hot, cold, filtered) with ½”toBSP
PLV Tefl
Cartridge outlet – Filtered (right side) female connections – pre-assembled to tap Spare ½” BSP Brass adaptor (female to (tape
male)½”provided forConnector
BSP Brass flexibility & ease of
Aerator & cold / hot outlet *Spare items inclu
different installation scenarios
Cartridge inlet – Filtered
yet towater
be filtered
outlet (left side) *Spare 450mm braided extension hoses 3 Way Mixer Tap
½” BSP female connections, included due
to modular design with HF1M Spare 450mm ½” Braided hose (female
Cartridge Mounting Bracket connection) for when extra length is
(supplied with fixings) Connector (1/2” BSP into braided hose, G¼” Hot & Cold Lever required during installation
Connector (½” Female BSP to cartridge mounting
John
head, G¼” John Guest tube Guesttotube
connection PLV) fitting) Filtered water lever
Please note: Microlene under bench systems and purifiers can only be used on biologically safe water sources. If your water contains bacteria or viruses, additional treatment is
required prior to the Microlene purifier in order to make the water safe to drink.
This product holds a 5 Year warranty on Taps and Fittings. The cartridge is a consumable item, warranty for cartridge limited to 6 months for manufacturing defect only. The warranty does not
cover infield service nor c over leaking or leaking damage caused by incorrect installation by plumber. This product should only be installed by a licensed plumber.
daveywater.com
This literature is not a complete guide to product usage. All images provided in this document are for illustration purposes only. Further information is available
DWP2195/0721
from your Davey Dealer, Davey Support Centre and from the relevant product Installation and Operating Instructions. Must be read in conjunction with the
relevant product Installation and Operating Instructions and all applicable statutory requirements. Product specifications may change without notice.
® Davey and Microlene are registered trademarks of Davey Water Products Pty Ltd. © Davey Water Products Pty Ltd 2021.