Professional Documents
Culture Documents
Standards
AISI American Iron and Steel Institute
Chemical Composition
C Si Mn P S Cr Mo Ni N Fe
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% < 0.1% Rest
18.0% 14.0%
ASTM A240: Si < 0.75% N: ASTM A240, ASTM A182 ASTM A312: Ni 11 - 14% (10 - 14% for welded pipes)
Steel Equivalents
China
C Si Mn P S Cr Mo Ni N Fe
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
https://www.metaldata.info/eng/wscompchart.htm 1/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% < 0.1% Rest
18.0% 14.0%
16.0 - 11.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.5% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.5% 14.0%
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 16.0 - 2.0 - 3.0% 10.0 - - Rest
18.5% 14.0%
https://www.metaldata.info/eng/wscompchart.htm 2/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.5% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
https://www.metaldata.info/eng/wscompchart.htm 3/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
< 0.08% < 1.0% < 2.0% < 0.035% < 0.03% 16.0 - 2.0 - 3.0% 10.0 - - Rest
18.0% 14.0%
C Si Mn P S Cr Mo Ni N Cu Fe
08Ch17N13M2
03Ch17N14M3, 000Ch17N13M2 - GOST 5582-75, GOST 5632-72, GOST 5949-75, GOST 7350-77, GOST 25054-81
16.8 - 13.5 -
< 0.03% < 0.4% 1.0 - 2.0% < 0.03% < 0.02% 2.2 - 2.8% - < 0.3% Rest
18.3% 15.0%
03Ch17N14M3 - TU 14-3-1357-85
16.0 - 13.0 -
< 0.03% < 0.4% 1.0 - 2.0% < 0.035% < 0.02% 2.5 - 3.1% - < 0.3% Rest
18.0% 15.0%
16.5 - 10.5 -
<0.07% < 1.0% < 2.0% < 0.04% < 0.03% 2.0 - 2.5% - - Rest
18.5% 13.5%
16.5 - 11.0 -
< 0.07% < 1.0% < 2.0% < 0.04% < 0.03% 2.5 - 3.0% - - Rest
18.5% 14.0%
https://www.metaldata.info/eng/wscompchart.htm 4/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
0.03 - < 1.0% < 2.0% < 0.045% < 0.03% 16.0 - 2.0 - 3.0% 10.0 - < 0.22% < 1.0% Rest
1.00% 18.5% 15.0%
https://www.metaldata.info/eng/wscompchart.htm 5/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
Europe
C Si Mn P S Cr Mo Ni N Cu Fe
16.0 - 9.0 -
< 0.07% < 1.5% < 1.5% < 0.040% < 0.035% 2.0 - 2.5% - < 0.5% Rest
20.0% 12.0%
https://www.metaldata.info/eng/wscompchart.htm 6/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.015% 2.0 - 2.5% < 0.1% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% <2.0% < 0.045% < 0.015% 2.0 - 2.5% < 0.11% - Rest
18.5% 14.0%
16.5 - 10.0 -
<0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.1% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.1% - Rest
18.5% 13.0%
https://www.metaldata.info/eng/wscompchart.htm 7/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.015% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.04% < 0.03% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.015% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
For tubes welded without filler material the sum of sulphur and phosphorus shall be maximum 0,040%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.015% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
For products to be machined a controlled sulfur content of 0.015 to 0.030% is recommended and permitted by agreement
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.11% < 1.0% Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.015% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.015% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.1% - Rest
18.5% 13.0%
Particular ranges of sulphur content may provide improvement of particular properties. For machinability, a controlled sulphur content of 0,015% to 0,030% is
recommended and may be agreed. For weldability, a controlled sulphur content of 0,008% to 0,030% is recommended and may be agreed
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
16.5 - 10.0 -
< 0.07% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% < 0.11% - Rest
18.5% 13.0%
https://www.metaldata.info/eng/wscompchart.htm 9/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
16.0 - 10.5 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 2.5% - - Rest
18.5% 13.5%
X7CrNiMo17-12-2
For products to be machined a controlled sulfur content of 0.015 to 0.030% is recommended and permitted by agreement
Japan
C Si Mn P S Cr Mo Ni N Fe
SUS 316 - JIS G 3448, JIS G 3468, JIS G 4303, JIS G 4304, JIS G 4305, JIS G 4308, JIS G 4309,
JIS G 4314, JIS G 4315, JIS G 4317, JIS G 4318
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
SUS 316 TK
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
SUS 32 B
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 16.0 - 2.0 - 3.0% 10.0 - - Rest
https://www.metaldata.info/eng/wscompchart.htm 10/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.04% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
SUS Y 316 - JIS G 4316, F SUS Y 316 - JIS G 3214, SUS Y 316 TK, SUS Y 316 TP
18.0 - 11.0 -
< 0.08% < 0.65% 1.0 - 2.5% < 0.03% < 0.03% 2.0 - 3.0% - Rest
20.0% 14.0%
https://www.metaldata.info/eng/wscompchart.htm 11/12
10/28/22, 6:31 PM Steel Equivalent Comparison Chart - information from WinSteel database
0.04 - < 0.75% < 2.0% < 0.03% < 0.03% 16.0 - 2.0 - 3.0% 11.0 - - Rest
0.10% 18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.04% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
16.0 - 10.0 -
< 0.08% < 1.0% < 2.0% < 0.045% < 0.03% 2.0 - 3.0% - Rest
18.0% 14.0%
https://www.metaldata.info/eng/wscompchart.htm 12/12