Professional Documents
Culture Documents
Research For Airplane Sprint
Research For Airplane Sprint
CAD Portion:
Wings
Body
Main Stabilizers
Side stabilizers
3 days on Micro: bit portion (should start by 11/9 and finish before 11/11)
Limits:
Measurements:
1st part: 10 inches length , 2nd part:7 inches length , 17 inches per wing (34 total inches in wingspan not
including the body), thickness of the airfoil should be 0.0984252inches but the width of the air foil can
be anything
1ST PART: SHOULD HAVE AN AIRFOIL THAT STARTS THICK AND GRADUALLY GETS THINNER
THE BACK END SHOULD BE HIGHER THAN THE FRONT END OF THE WINGLET
Body- Dhriti
Stabilizers - Dhriti
Measurements:
The fuselage length should be equal to the length of each wing for a glider,
https://fetchcfd.com/view-project/36-extra-300-EP-assembly-by-mahdi-faraji
Nose:
36-inch wingspan