Professional Documents
Culture Documents
PT. PROFLUID is NOT a SUPPLIER but a PARTNER, as a partner, our concerns are to fulfill our customer requirements and
to provide the best economic solution. With basic as Parker Distribution, PROFLUID is able to provide proud achievements.
PT PROFLUID is a company specialized in CNG Industry. We provide a wide range of CNG Product application for Mother
Station, Daughter Station, NGV/CNG Station and Industry Application. PT PROFLUID Supports the customer with our
specialized engineering team for a new system or reverse engineering.
PT PROFLUID is now expanding to Oil and Gas industry. PT PROFLUID has an engineering capability with qualified
personnal and experiences in :
1. Parker Filtration
2. Parker Air Dryer
3. Parker DBB Valves
4. Parker Twin Filter / Drilling
5. Voith Variable Speed Drive (VSD)
6. TSM Metal Filter and Strainee
7. Aalloy Tubing & Fittings
8. CPI Compression Valves
9. Parker Fluid Connectors
10. Parker Instrumentation
1. Parker Oil Puriffier
PVS 185 Flow rate 5 gpm (18.9 lpm) PVS 600 Flow rate 10 gpm (37.9 lpm)
Weight 650 lbs. (294.8 kg) Weight 900 lbs. (408.2 kg)
Seal material Fluorocarbon (EPR optional) Seal material Fluorocarbon (EPR optional)
Condensate tank 4.1 gal (15.5 ltrs) Condensate tank 4.1 gal (15.5 ltrs)
Minimum operating capacity 5 gal (18.9 ltrs) Minimum operating capacity 6 gal (22.7 ltrs)
Viscosity (max) 500 sus (108 cSt)- Viscosity (max) 500 sus (108 cSt) -
Disposable Disposable
2150 sus (460 cSt)-Packed 2150 sus (460 cSt) - Packed
Tower Tower
Outlet pressure (max) 60 psi (4.1 bar) Outlet pressure (max) 60 psi (4.1 bar)
Ports 3/4" JIC (male) inlet Ports 1" JIC (male) inlet
3/4" JIC (male) outlet 1" JIC (male) outlet
FLA (full load amps) 15-41 amp FLA (full load amps) 24-38 amps
(Depending on voltage used) (Depending on options &
voltages)
PVS 1200 Flow rate 20 gpm (75.7 lpm) PVS 2700 Flow rate 45 gpm (170.3 lpm)
Weight 1550 lbs. (703.1 kg) Weight 2550 lbs. (1156.7 kg)
Seal material Fluorocarbon (EPR optional) Seal material Fluorocarbon (EPR optional)
Condensate tank 8.3 gal (31.4 ltrs) Condensate tank 8.3 gal (31.4 ltrs)
Minimum operating capacity 11 gal (41.6 ltrs) Minimum operating capacity 18 gal ( 68.1 ltrs)
Viscosity (max) 500 sus (108 cSt) - Viscosity (max) 500 sus (108 cSt)-
Disposable Disposable
2150 sus (460 cSt) - Packed 2150 sus (460 cSt) – Packed
Tower Tower
Outlet pressure (max) 60 psi (4.1 bar) Outlet pressure (max) 60 psi (4.1 bar)
FLA (full load amps) 30-48 amps FLA (full load amps) 40-65 amps @ 460 V/60hz
(Depending on options &
voltages)
TF-OFC105-A7-JCE- TF-OFC140-A1-NY-
SSS TF-OFC105-A7-NY-JCE TF-OFC140-A1-JCE-SSS JCE
Parker Hannifin’s response to the demand for reduction in leakage paths has been the combination of primary and secondary
valves into one compact unit. The combining of piping and instrument valves into a single unit has benefitted various markets.
We now offer a range of Ultra-Low Emission products which meet class ‘A’ or class ‘B’ levels of ISO 15848 standard for Ultra-
Low emissions, as required.
Twin Filter
Completion fluids filtration
Clean completion fluids are essential to maximise the productivity of the producing reservoir. Dirt particles in completion fluids
have major effects on permeability. This can result in significant reductions in oil production and the lifetime of the producing
well. Using the correct selection of filtration equipment and consumables will provide cleaner completion fluids. Diatomaceous
earth (DE) filtration is an effective method for filtration of oilfield brines. The company's filter press, in combination with the
Duplex Cartridge filter unit or Vertical Pressure Leaf filter unit, offers an excellent solution.
Frac fluids filtration
The water that flows back from the fracking process (flow back water) is a mixture of fracking fluid and formation water. To
reuse this water, it needs to be cleaned of chemicals and rock debris. For filtration before and after fracking, Parker Twin Filter
offers a complete delivery programme. When the chemistry of the water coming from the well resembles the rock formation
rather than the fracking fluid, we speak of produced water.
Often, the media in Japan. Often reports on contaminants in the product. About food and drink in the newspapers, including the
television. The recalled products were produced. Suspected to have contaminated the product. Consumers are worried about the
safety of food and beverages that are contaminated, consumers are paying more attention to this special. This is the result of
sales of food and beverages fell. The company has more news about the contamination of foreign matter in the product the
company has sales dropped dramatically. For this reason, Food and beverage industry turned to filter Sintered which are of good
quality and safe piece of wire worry about contamination into the product.
Standar Spesification Filter Poremet Filter basket Filters for polymer Eight gas filter at Fold pleated filter Dry Filter
tube Olean
Sintered wire meshes+perforated
metal
Filter layer 10~500mesh
Filtering rate 2~200 micron 2~200micron
(nominal) (nominal)
Material stainless steel stainless steel 304, stainless steel 304, stainless steel 304, stainless steel 304, stainless steel 304,
304,stainless steel stainless steel 316, stainless steel 316, stainless steel, stainless steel stainless steel
316, stainless steel stainless steel 316L stainless steel 316L stainless steel 316L 316,stainless steel 316,stainless steel
316L 316L 316L,Hastelloy
Dia. (mm) φ25, φ50, φ75 φ50~φ1000 φ14, φ20, φ25, φ30 φ14, φ20, φ25, φ30 up to φ2000
Length (mm) 250, 500, 750, 1000 300~2000 500, 750, 1000, 1000, 1500, 2000
1500, 2000
Aalloy Instrumentation-Fittings
The CPI range meets most application requirements and CPI valve design
includes valves such as CPI Hi-Flo™, radiused disc, ring,
CPI engineers utilize sophisticated proprietary valve dynamics
dampened disc, ported plate, replaceable seat plate and the CPI
programs to carry out valve performance modeling and analysis
IPV-indicator ported valve. To support compressor operators,
of existing operations in order to accurately select the optimum
CPI provides valve reconditioning services from various
valve design solution for a specific application. This is
facilities located around the world. CPI also has the capability
combined with R&D programs that are focused on all aspects
to supply a wide range of replacement parts from seats and
of valve design detail, reliability, efficiency, ease of installation
guards to internal components.
and maintenance.
CPI Hi-Flo™ Valves Hi-Flo™ RS Valve CPI Hi-Flo™ Valves Plate Valves
Nobody offers more hose and fittings in more variations than ParkerWith over 750 end configurations, our yellow zinc-
dichromate coated steel and our brass and stainless fittings include: o-ring face seal, flare, straight thread, male pipe and metric
designs in both crimp and field-attachable styles. All have been tested and approved to meet stringent worldwide standards such
as SAE, ISO, and DIN. With a wide variety of inner tubes, reinforcement and cover combinations to meet your specific
application requirements, our hoses range in size from ¼" to 3" I.D. and have the same reputation for quality as our fittings do.
Phone: +62-811-8861-588
Fax: +62-21-8834-3949
Email: info@pt-profluid.com