Professional Documents
Culture Documents
References for using the new ID CPR74 Reader instead off the
ID CPR44
Feig has replaced the ID CPR44 reader with the new ID CPR.74. This application note
describes the main technical differences between ID CPR.44 and the successor, with
more features and powerful reader ID CPR74.
In general the ID CPR74 will be interface compatible to FEIG ID CPR-Reader. This
application note will enable you to make an informed assessment for your existing and
new application to be sure that this new reader can achieve your technical requirements
depending on your hard- and software environment.
ID CPR.44 ID CPR.74
ID CPR44.02-CUSB 3708.001.00
ID CPR44.01-CUSB 3701.001.00
85 114
N61010-0e-ID-C.docx / 2016-10-19
®
OBID classic-pro HF ID CPR.74-x
ID CPR.44 ID CPR.74
Antenna selection (internal / external)
Power Supply
Dimension
Protocol Frame
Scan Mode
Available for RS232TTL Interface Available for RS232TTL and USB Interface
(Scan mode and USB works as HID)
Reader-Configuration
Note:
We recommend to use the “Advanced Protocol Frame” if a application has to
be new compiled.
For new projects and applications we recommend to use the current SDK
versions.