Speed Post
1-21/98/2019-W&M Section
Government of India
Ministry of Consumer Affairs, Food and Public Distribution
Department of Consumer Affairs
Legal Metrology Division
Krishi Bhewan,New Delhi-01
Dated: 10.07.2019
To,
M/s Tulsa Gas Technologies India Pvt. Ltd.,
517, HSIDC Industrial Area, Kundli,
Sonepat (Haryana)-131028
Subject: Approval of Model under the Legal Metrology (Approval of Model) Rules, 2011-reg.
Sir,
‘The undersigned is directed to refer to your letter no W8&M/APP/2019/1 dated
04.04.2019 on the above mentioned subject and to state that the approved model of Flow
Meter ‘CNGmass DCI’ of M/s Endress+Hauser Flowtec (India) Pvt Ltd, Maharashtra vide
approval mark: IND/13/12/244 dated 26.06.2012 may be used in the approved model of M/s
Tulsa Gas Technologies India Pvt. Ltd., Haryana of CNG Dispenser approved vide approval mark:
IND/09/12/401 dated 17.10.2012 by M/s Tulsa Gas Technologies India Pvt. Ltd., Haryana.
Yours faithfully,
pacer MP
(Ashutosh Agarwal)
Deputy Director (LM)
For, Director, Legal Metrology
Phone 011-23386194
Email: ashutosh.agarwal13@nic.in
ae
Copy to: The Controller of Legal Metrology, Government of Haryana for kinc information
SHUTOSHAGARNAL
Soi SE None