Professional Documents
Culture Documents
SIKA Catalog 2020 - Infrastructure
SIKA Catalog 2020 - Infrastructure
INFRASTRUCTURE AND
INDUSTRIAL
SIKA PHILIPPINES
09.2020 EDITION
WE ARE SIKA
Sika is a specialty chemicals company
with a leading position in the
development and production of SIKA AT A GLANCE
systems and products for bonding,
sealing, damping, reinforcing, 25, 000+ EMPLOYEES
protecting and finishing in the 100+ COUNTRIES
construction and motor vehicle 300+ PLANTS WORLDWIDE
industries. 7 NEW FACTORIES IN 2019
93 NEW PATENTS IN 2019
MORE THAN 100 YEARS 5 ACQUISITIONS IN 2019
OF BUILDING TRUST 8.1 BN CHF NET SALES IN 2019
Our reputation for quality and reliability
is unmatched and illustrated through
a comprehensive portfolio of problem
solving products that have been
employed for many years in a diverse
range of applications.
3
.
TABLE OF CONTENTS
CONCRETE ADMIXTURE.................................. 1 EPOXY GROUTS ........................................... 11
Sika® ViscoCrete® Series............................................................... 1 Sikadur®-42 MP Normal HC.......................................................... 11
SikaPlast®-2000 P4 GN................................................................. 1 Sikadur®-53..................................................................................... 11
Sika® Plastiment-25 TM PH.......................................................... 1
Sikament® NN Liquid and Powder................................................ 2
Sikament® R-4 P1.......................................................................... 2 RIGID BONDING AGENTS ............................. 11
Sika® Plastocrete® N PH............................................................... 2
Sikadur®-31 CF Normal................................................................... 11
Sika® Plastocrete® RM/C.............................................................. 2
Sikadur®-732.................................................................................. 11
4
.
TABLE OF CONTENTS
BITUMINOUS WATERPROOFING .............. 17-18 PU FOAM &
Bitumen Impregnated Board 35%................................................ 17 MULTIPURPOSE ADHESIVE........................... 24
SikaBit W-15................................................................................... 17 Sika® Boom AP............................................................................... 24
Davco Waterproofing Membrane 3.5kg....................................... 17 SikaBond®-124 Instant Nails......................................................... 24
Sika® Bituseal T-130 SG/T-140 SG................................................ 18
PRIMER &
LIQUID APPLIED MEMBRANES ................ 18-19 AUXILIARY PRODUCTS................................... 25
SikaProof® Membrane.................................................................. 18 Sika® Primer-3 N............................................................................ 25
SikaCoat Plus................................................................................. 18 Sika® Heavy Duty Gun................................................................... 25
Sika® MultiSeal AP......................................................................... 25
Sikalastic®-110............................................................................... 18
Sika® Backer Rod PH...................................................................... 25
Sikalastic®-590.............................................................................. 19
Sikalastic-870BT............................................................................ 19
Sikalastic®-632 R.......................................................................... 19
Davco K10 GRS 2000..................................................................... 19 SILICONE SEALANTS ................................... 26
Sikasil® SG-18................................................................................. 26
Sikasil WS-305KR.......................................................................... 26
ROOF WATERPROOFING............................... 20 Sikasil® SG-500 CN........................................................................ 26
Sarnafil G410 Felt / Non-Felt PVC Membrane............................. 20
Sarnafil S327 PVC Membrane....................................................... 20
Sarnafil G476 PVC Membrane....................................................... 20 EPOXY FLOORING........................................... 27
Sikafloor®-161 HC........................................................................... 27
PASSIVE FIRE PROTECTION Sikafloor®-263 SL HC.................................................................... 27
SOLUTIONS............................................... 21-22 Sikafloor®-264 HC......................................................................... 27
Sikafloor®-381............................................................................... 27
Sikasil®-670 Fire............................................................................ 21 Sikafloor Décor White................................................................... 27
Sikacryl®-621 Fire........................................................................... 21
Sikacryl®-620 Fire.......................................................................... 21
Sikaflex®-400 Fire......................................................................... 21 POLYURETHANE FLOORING..................... 28-30
Sika® Backer Rod Fire.................................................................... 21 Sikafloor®-21 PurCem LP............................................................... 28
Sika Boom®-400 Fire.................................................................... 21
Sikafloor®-20 PurCem LPF............................................................ 28
Sikacryl®-624 Fire.......................................................................... 21
Sikafloor®-31 PurCem® LP............................................................. 29
SikaSeal®-623 Fire......................................................................... 22
Sikafloor®-29 PurCem LP.............................................................. 20
Sikacryl®-625 Fire.......................................................................... 22
Sikafloor®-315................................................................................. 30
SikaSeal®-626 Fire Board.............................................................. 22
SikaRepair EpoCem® Module AB.................................................. 30
SikaSeal®-627 Fire Collar............................................................... 22
SikaSeal®-628 Fire Wrap............................................................... 22
SikaSeal®-629 Fire Wrap............................................................... 22
RESIN/CEMENTITIOUS FLOORING................ 30
Sikacrete®-630 Fire....................................................................... 22
Sikafloor®-81 EpoCem® New HC.................................................. 30
Sikafloor®-82 EpoCem®................................................................ 30
POLYURETHANE SEALANTS .................. 23-24
Sikaflex® Construction.................................................................. 23
SikaHyflex-250 Facade.................................................................. 23
Sikaflex® PRO-3............................................................................. 23
Lanko 603....................................................................................... 24
5
TABLE OF CONTENTS
CEMENTITIOUS FLOORING....................... 31-32
Lanko 162 RD Flow Prime.............................................................. 31
Lanko 783 Acrylic Polymer............................................................. 31
Lanko 123 Lankoself Thick............................................................. 31
Lanko 173 Lankoself Skim............................................................. 31
Lanko 196 Floor Screed.................................................................. 32
Sikafloor® CureHard-24................................................................. 32
Sikafloor®-3 QuartzTop P.............................................................. 32
ACCESSORIES................................................ 33
Extender T...................................................................................... 33
Sikadur 501..................................................................................... 33
6
Sika® ViscoCrete® Series
CONCRETE ADMIXTURE
High-Efficient Superplasticizers n Provides many opportunities for cost improvement (e.g.
Latest development superplasticizer Cement replacement/ reduction, more economic design mix)
for concrete n Does not contain chloride or any other ingredients which
promote the corrosion of steel. It is therefore suitable for use
Packaging: in reinforced and pre-stressed concrete structures.
210 L/drum
1000 L/bulk Sika® ViscoCrete®-3002 P11, -3000 P7 & -4000PH
It is compliant for superplasticizers according to ASTM C494 Type G
Uses:
A unique multipurpose superplasticizer Sika® ViscoCrete®-381 PH and -385
that is particularly suitable for the production It is compliant for superplasticizers and long slump keeping according
of ready mix concrete. Additionally it provides to ASTM 494 Type G
high water reduction and improved fresh concrete characteristics.
With its outstanding cost / performance, Sika® ViscoCrete® is used Sika® ViscoCrete®-4100 and -386
for the following: It is compliant for superplasticizers according to ASTM 494 Type F
n A wide range of applications where excellent workability is
requested
n Concrete with high water reduction
n High efficient concrete applications Shelf Life:
n Variable use in different concrete systems with 12 months
different raw materials
n Self-compacting concrete (Sika® ViscoCrete®-4000 PH)
Advantages:
A powerful superplasticizer based on advanced technology which
gives the following advantages:
n High water reduction, resulting in high density, high strength
and reduced permeability
n Less sensitive against variations in aggregates and / or different
cement types
n High efficiency even at low dosage rates
n Extended workability in conjunction with subsequent strength
development
n Superior plasticizing effect, resulting in improved flow, placing
and compaction characteristics
n Reduced shrinkage during curing and reduced creep when
hardened
1
CONCRETE ADMIXTURE
Sikament® NN Liquid and Powder Sikament® R-4 P1
High Range Water-Reducing Concrete Admixture High Range Water-Reducing and Set
A highly effective dual action superplasticizer for Retarding Concrete Admixture
the production of free-flowing concrete or as a sub- developed for RMC
stantial water-reducing agent for promoting high
early and ultimate strengths; complies with A liquid superplasticizing admixture based on selected
ASTM C-494 Type F synthetic polymers especially designed to improved
Packaging: performances of ready-mix concrete in hot weather,
Liquid: 5 L/container Powder: 150 g /pack for long delivery/placement situations, and for long
10 L/container line of pumping concrete or when delays are
210 L/drum anticipated. It has an active water reducing agent;
Uses: complies with ASTM C494-92 Type G that helps
Sikament® NN Liquid and Powder is used as a superplasticizer in promote early high strengths after final set of
the production of free-flowing concrete such as: concrete, and gives superb ultimate strengths
n Slabs and foundations
n Walls, columns and piers Packaging:
n Slender components with densely packed reinforcement 210 L/drum
n Textured surface finishes Uses:
It is also used as a water reducing agent leading to high early Sikament® R-4 P1 as a superplasticizer for flowing concrete in:
strength concrete such as: n Floor slabs and foundations
n Precast concrete elements n Slender components with densely packed reinforcement
n Hollow blocks and pavements n Walls and columns
n Pre-stressed concrete n Beams and ceilings
n Bridges and cantilever structures
n Areas of concrete where formwork must be removed quickly or Advantages:
early loading applied As a Superplasticizer:
Advantages: n Highly effective without increased w/c ratio or risk of segreration
As a Superplasticizer: n Lasting control of slump loss
n Workability is greatly improved n No adverse effect on ultimate strengths
n Increased placeability in slender components with packed As a Water Reducer:
reinforcement n Early and ultimate strengths significantly increased. Up to 20%
n Decreases the amount of vibration water reduction
n Normal set without retardation n Especially suitable for hot climates
n Significantly reduces the risk of segregation n No excessive air entrainment and adverse shrinkage effect
As a Water reducer: n Increased water tightness and improved surface finish
n Up to 25% water reduction
n 28-day strength improved by up to 40% Shelf Life:
12 months
Shelf Life: 12 months
Shelf Life:
12 months
2
Sika® Antisol S
CONCRETE ESSENTIALS
Curing Agent For Concrete
Sika® Antisol S is a ready to use solution which forms a micro-crystalline seal in the concrete pores reducing the
evaporation rate of moisture from the concrete mix and thus assisting in the complete curing process.
Packaging: Shelf Life:
210 L/drum 12 months
Uses:
n Applied to fresh concrete surfaces to form an impervious layer which protects the concrete from rapid water
evaporation during initial curing stages.
n Particulary recommended for the treatment of
vertical surfaces which will receive subsequent treatments or where resin based curing membranes would be
unsuitable.
n Useful in buildings and manufacturing industries
Advantages:
Sika® Antisol S provides the following beneficial properties to concrete surfaces:
n Generally helps concrete to attain maximum n Reduces dust formation
hydratation, strength durability and surface hardness n Reduction in permeability of concrete
n Improves the surface appearance n When used properly, adhesion of subsequent treatments to concrete
n Reduces shrinkage surface is not impaired
SikaFume
Additive for Durable and High Ultimate Strength Concrete
Sika® Fume is a new generation concrete additive in loosely agglomerated particles form based on silica fume
technology. It is a highly effective additive for the production of high performance concrete
Packaging:
10 Kg/bag
Uses:
Sika® Fume is used in shortcrete, structural concrete, precast concrete and other fields of concrete
construction where high demands are imposed on the quality of fresh and hardened concrete.
Advantages:
Sika® Fume contains extremely fine latently reactive silicic dioxide. The presence of the substance
imparts greatly improved internal cohesion and water retention in the fresh concrete. In the harde-
ned concrete, the latently reactive silica fume forms a chemical bond with the free lime (CaOH2).
The additional formation of hydration products results in a significantly denser cement matrix.
With the use of Sika® Fume the concrete will show the following properties:
n High stability of green concrete
n Highly increased durability n Increased water tightness
n Increased ultimate strengths n Increased gas tightness
n Increased abrasion resistance n Reduced chloride penetration
Shelf Life:
36 months
3
CONCRETE ESSENTIALS
Sika® MRA Sika®Rugasol C
Emulsion-Based Mould Release Agent Surface Retarder for Horizontal Surfaces
A carefully blended combination of refined mineral A ready-to-use liquid that retards the surface
oils and emulsifying agents, producing a thin film mortar of concrete to expose the aggregate
stable release agent
Packaging: Shelf Life:
Packaging: 210 L/drum 12 months
210 L/steel drum
Uses:
Uses: Sika®Rugasol C is a surface retarder for
Sika® MRA, when applied to steel, plastic and application on horizontal surfaces of freshly
timber formwork, allows clean, fast and laid concrete area such as:
easy striking. n Floor slabs
n Paths
Advantages: n Driveways
Sika® MRA provides the following properties: n Patios
n Good adhesion to the formwork n Swimming pools
n Does not re-emulsify n Concrete construction joints
n Undisturbed by concrete
n Reduces concrete contamination Advantages:
n Non-inflammable Exposing the aggregate is one of the most effective methods of
n MRA is suitable for use on all type of formwork preparing concrete construction joints.
n All tools can be cleaned with water By producing exposed aggregate surface finishes, it offers the
n It is an effective rust inhibitor opportunity for decorative finishes to concrete surfaces particularly
around houses, civic amenities, office buildings, shopping plazas,
Shelf Life: commercial building, and others.
12 months
4
CONCRETE ESSENTIALS
SikaFiber PP Micro-20 Sikacrete-213 FMY
Monofilament Polypropylene Fiber Wet Sprayed Fire Protection Mortar
SikaFiber PP Micro-20 is a monofilament Cement-based pre-bagged, dry mix fire
polypropylene fiber for use in concrete to protection mortar for wet sprayed application
reduce the incidence of plastic shrinkage especially in tunnel construction. Sikacrete has
cracking. SikaFiber PP Micro-20 increases approval for use up to 4 hours fire protection
the strain capacity of the fresh concrete
therefore reducing plastic cracking Packaging:
12 Kg/bag
Packaging:
18 kg/box (0.6 kg/PE bag) Uses:
Uses: Sikacrete-213 FMY is used for concrete,
SikaFiber PP Micro-20 is ideal for use in reinforced concrete, carbon fiber and steel
concrete used to produce: structures exposed to fire hazards. It contains
n Floor slabs phyllosilicate aggregates, which are highly
n Driveways effective in resisting the heat of hydrocarbon
n Tilt slabs fires. The thickness of the fire protection
n Floor toppings layer to be applied depends on the specified
n Precast units fire resistance. The outstanding properties
n Colored concrete of Sikacrete-213 FMY allow greatly reduced
SikaFiber PP Micro-20 can be used in both dry and thickness of the fire protection layer required
wet shotcrete applications such as:
n Pools Advantages:
n Channels n Pre-bagged dry mortar mix for application by the wet spray
n Retaining walls process
n Building restoration n Minimal layer thickness to meet specifications
Advantages: n Easy to apply
SikaFiber PP Micro-20 provides the following benefits: n It does not contribute to the formation of smoke or toxic fumes
n Less plastic shrinkage cracking in fire
n Increased resistance to impacts and shattering n Light weight, low density
n Increased abrasion resistance n The sprayed mortar surface can be finished by trowel or wood
n Non-staining float
When used in shotcrete the benefits are: n Minimal rebound
n Reduced rebound waste Shelf Life:
n Thicker layer builds 12 months
n Reduced sag
n Increased fatigue resistance
n Alkali and dust proof
n Non-staining
Shelf Life:
Unlimited in original sealed container
5
Sika® Sigunit® P-1 AF Sika® Sigunit® L-54 AF
Accelerating Shotcrete Admixture Powder Alkali-Free Liquid Shotcrete Accelerator
MINING
Sika® Sigunit® P-1 AF is a readily soluble powder. Sika® Sigunit® L-54 AF is a high-performance,
Sika® Sigunit® P-1 AF dissolved in water is a high alkali-free accelerator in liquid form for shotcrete
performance liquid, alkali-free set accelerator for applications
shotcrete. Its effectiveness depends on its mixing Packaging:
ratio between powder and water 210 L/drum
Packaging: Uses:
25 Kg/bag Sika® Sigunit® L-54 AF is a set accelerator
Uses: suitable for both wet and dry spray
Sika® Sigunit® P-1 AF dissolved in water is applications mainly used in:
suitable for both dry and wet spraying n Securing of rock in tunnel and mine construction
processes and it is used for: n Rock and slope stabilization
n Support at the face whilst advancing tunnel and mines n High quality shotcrete for general construction work
n Rock and slope stabilization
n High quality lining shotcrete Advantages:
n Alkali-free (non-caustic)and classified as non-toxic product
Advantages: n Very fast setting of shotcrete mixes
Sika® Sigunit® P-1 AF dissolved in water as a shotcrete set accelerator n No strength loss of the accelerated concrete if used correctly
has the following characteristics and advantages: n No additional contamination of mountain and ground water due
n High early strength development to washed out alkalis
n Alkali-free n Large reduction in rebound
n Minimal strength loss of the accelerated concrete n Improves bond of shotcrete, making overhead spray easier
n No pollution of groundwater by leached out alkalis n Free of chlorides, no danger to steel reinforcement and steel
n Distinct reduction of rebound & dust fibers
n Improves bond of shotcrete to rock and concrete thus facilitating n Low viscosity - less pumping problems
overhead spraying
n Chloride-free, no negative effect on reinforcement steel Shelf Life:
3 months
The supply in powder form has the following additional advantages:
n High flexibility in use
n Low cost of logistics
n Longer shelf life
Shelf Life:
12 months
6
CEMENTITIOUS GROUTS
SikaGrout® UW MY SikaGrout®-200 PT ID
Shrinkage Compensated Cementitious Grout for High Performance, Zero Bleed, Sand Free, Cementitious
Underwater Applications Grout for Post-Tensioned Structures and Anchor Bolting
SikaGrout®-215 SikaGrout®-212
Pumpable Shrinkage Compensated Shrinkage Compensated Grout
Cementitious Grout
SikaGrout®-212 is a shrinkage compensated,
SikaGrout®-215 is a shrinkage compensated self-leveling, pre-mixed cementitious
self-leveling, cementitious grouting mortar grouting mortar with extended working
with extended working time to suit local time to suit local ambient temperature;
temperature Complies to ASTM C-1107
Packaging: Packaging:
25 Kg/bag 25 Kg/bag
Uses: Uses:
SikaGrout®-215 is suitable for repairs to SikaGrout®-212 is suitable for the following
concrete structures and the following grouting works: machine foundations, rail beds,
grouting works with clearance of columns in precast construction anchor bolts,
10mm or more: bridge bearings cavities, gaps, recesses
n Machine foundations
n Rail beds Advantages:
n Columns in precast construction n Excellent flowability
n Concrete anchors n Good dimensional stability
n Bridge bearings n High strengths, adjustable consistency
n No bleeding
n Cavities DPWH Pay Item n Non-toxic, non-corrosive DPWH Pay Item
n Gaps Listed Reference
n Recesses n Ready and easy to use Listed Reference
n Economical
Advantages: n Impact and vibration resistant
n High early strength
n High ultimate strength Shelf Life:
n Extended working time 12 months
n Dense, non-shrink
n Non-toxic, non-corrosive
n Chloride and iron-free
Shelf Life:
12 months
7
CHEMICAL ANCHORING CEMENTITIOUS GROUTS
SikaGrout®-112 PH
General Purpose Non-Shrink Grout
For grouting works requiring up to 6,000 psi (28d) NEW!
Packaging:
25kg bag
Uses:
Bedding, filling and grouting applications where complete filling of voids and
non–shrink material is required. It can be used under-plate, repairs to precast
concrete, bedding bearing plates and anchor bolt fixing.
Shelf Life:
6 months
DPWH Pay Item
Listed Reference
Sika® AnchorFix-3001
High-Performance, Professional Epoxy Anchoring Adhesive
Solvent-free, thixotropic, two-part, epoxy resin-based, high performance anchoring
adhesive for threaded rods and reinforcing bars in both cracked and un-cracked concrete
8
CONCRETE REPAIR
SikaTop®-121
Polymer Modified, Patching and Adhesive Mortar
A two-component cement based polymer modified trowelable adhesive and filling
compound for the protection and repair concrete surfaces
Packaging: Shelf Life:
25 Kg/set 9 months
Uses:
n Protective coating for bridge parapets retaining walls
n Filling compound to level of irregularities and fill blowholes and fine honey combings
n Bonding mortar between new and old concrete
n Rendering for reservoirs
Advantages:
n Easy to mix and apply
n Excellent adhesion
n Good mechanical strength
n Increase resistance to salt water, chlorides and carbonation
n Waterproof
n Non-corrosive to steel, non-flammable
n Non-toxic
n High abrasion resistance
SikaTop®-122
Fiber-Reinforced, Polymer Modified Repair Mortar Advantages:
n Easy to mix and apply
Two-component, cement based polymer modified, n Excellent adhesion
repair mortar with added polyamide fibers, to form a n Good mechanical strength
high strength repair and levelling mortar for concrete n Good water and oil resistance
n Increase resistance to salt water,
chloridesand carbonation
Packaging: n Non-toxic and non-flammable
30 Kg/set n High abrasion resistance
Uses: Shelf Life:
As an economical and easy to use concrete 9 months
repair mortar, suitable for:
n Bridges
n Water retaining structures
n Making good damaged edges and joint arises
n Repairing honeycombing
n Concrete repair in general
SikaRepair-224
One-Component, Cementitious, Sprayable Mortar for
Structural Repairs Advantages:
n Ready-to-use, one-component material
SikaRepair-224 is a one-component, pre-packaged, ready-to-use, n Easy to use; just add water
cementitious, silica fume, fiber-reinforced, high strength n Sprayable system
shrinkage-compensated mortar. Formulated for application by n Potable water approved
trowel or low pressure spray. It is designed especially for repair of n Superior workability. Can be trowelled
overhead and vertical surfaces. and screeded after application
n Labor-saving system
Packaging: n Superior abrasion resistance over
22.7 Kg/bag conventional Portland cement mortar
n Bond strength ensures superior adhesion
Uses: n Not a vapor barrier
A high-performance repair mortar for wet spray application. n Compatible with coeffiecient of thermal
Suitable for new construction, repairs, and maintenance work. expansion of concrete
Typical applications include: n High early strengths
n Structural repair material for water and wastewater treatment n Very low shrinkage
plants, parking structures, industrial plants, bridges, tunnels and n Silica Fume enhanced
dams, etc. n Fiber reinforeced
n Use on vertical and overhead surfaces
n Use on grade, above, and below grade on concrete and mortar
n Potable water tank (NSF approved in Marion, OH and Santa Fe Shelf Life: 12 months
Springs, CA)
9
CONCRETE REPAIR
Lanko 712 Rapidex Lanko 731 Lankorep Structure PH
Fast-Setting Non-Shrink Fiber Reinforced Non-Shrinking Mortar
Fiber-Reinforced Mortar
LANKO 712 LANKOROAD RAPIDEX is a LANKO 731 LANKOREP STRUCTURE PH is a
fast-setting repair mortar for roads and fiber-reinforced non-shrink mortar for repair
floors. of concrete structures and reinforcement of
weakened structures with application thick-
Packaging: Shelf Life: ness of 5mm to 50mm.
25 kg bag 6 Months
Packaging: Shelf Life:
Uses: 25 kg bag 12 Months
n Repairs to concrete facades,
spalling, honeycombing Uses:
n Concrete restructuring: balconies, n Repair of concrete surfaces: spalling,
terraces, walls, overhangs, cornices honeycombing, stairnosing, ramp, etc.
n Concrete restructuring: pillars, slabs, posts,
Advantages: dams, aprons and spillways
n Non-shrink mortar n Reinforcement of weakened structures:
n Provides a smooth finish balconies and cornices DPWH Pay Item
DPWH Pay Item n Treatment of chamfers and seams prior
n Can be painted over after 24 hours Listed Reference Listed Reference
(depending on thickness and to waterproofing
atmospheric conditions) Advantages:
n High mechanical strength
n Excellent resistance to sea water & sulphated waters
Packaging:
25 kg bag
Uses:
n Repairs to concrete facades, spalling, honeycombing
n Concrete restructuring: balconies, terraces, walls, overhangs, cornices
Advantages:
n Non-shrink mortar
n Provides a smooth finish
n Can be painted over after 24 hours (depending on thickness and atmospheric conditions)
Advantages:
n High Early Strength
n High Mechanical Strength
n Easy and Fast Application
10
EPOXY GROUTS
Sikadur®-42 MP Normal HC Sikadur®-53
3-part, Multipurpose Epoxy Water Displacing Epoxy Resin Grout
Grouting System
Sikadur®-42 MP Normal HC is a Sikadur®-53 is a pourable, multi-functional
three-component, multipurpose, high density epoxy grout based on a 2-compo-
moisture tolerant, epoxy grouting nent
system. For use at temperatures solvent free epoxy resin system containing fine
between +10oC and +30oC fillers. Sikadur®-53 exhibits excellent
Packaging: insolubility and displacement characteristics in
12 Kg/set wet and underwater applications but useable in
Uses: Packaging:
High strength grouting and fixing of: 18 Kg/set
n Starter bars Uses:
n Anchors n Used for underwater and dry grouting work and offers excellent
n Fasteners adhesion to both dry and clean water immersed concrete, stone
n Tie rods masonry, brick, wood or steel surfaces
n Crash barrier posts n Highly insoluble in water and safe for specialist diver use
n Fence and railing posts n Used for injection of cracks 0.5mm to 40mm wide under water
Under-grouting and bedding of: (cracks not conducting a water flow under pressure)
n Base plates n Ideal for pile jacketing using prepacked aggregate in formwork
n Machine bases, seat base-plates for light and heavy machinery n Mixed with 30% by volume sand a high build grout is formed that is
including heavy impact and vibratory machinery, reciprocating easy to apply under water
engines, compressors, pumps, presses, etc. n Used to grout starter bars, baseplate grouting and bolts for dry and
n Bridge bearings underwater construction work
n Mechanical joints (i.e. road/bridge/deck types, etc.) n May also be used as a bonding bridge for underwater concreting and
Sleeper-less, direct rail fixing: as a pipeline jointing material
n Crane tracks Advantages:
n Light rail and permanent way in tunnels n Suitable for dry, wet, underwater or marine applications
n Light rail and permanent way over bridges n Applicable at low temperatures
Advantages: Shelf Life: n High mechanical strengths
n High early strengths Part A & B -24 months n Highly insoluble in water
n Ready-to-mix, pre-batched units Part C - 9 months n Supplied in factory proportioned units
n Moisture tolerant n Shrink-free
n Non-shrink n Can be bulked out with aggregate of thicker pour applications
n Corrosion and chemically resistant n Excellent chemical resistance to water, sea water, waste water,
n Stress and impact resistant sewage, fuels, oils, dilute acids and dilute alkalis
n High compressive strength n To be used in conjunction with pile jacket systems for
n High vibration resistance rehabilitation of concrete and timber piles in marine applications
n Low coefficient of thermal expansion
11
STRUCTURAL STRENGTHENING
SikaWrap®
Woven Unidirectional Fiber Fabric, Designed forvStructural
Strengthening Application as Part of the Sika® Strengthening
System
SikaWrap® is a unidirectional woven carbon or glass fiber fabric with
mid-range strength, designed for installation using the dry or wet
application process; Complies to DPWH Item-416 & ACI 440.2R
Product Range:
Carbon Fiber
SikaWrap®-230 C 0.5 m x 100 m/roll
SikaWrap®-300 C 0.5 m x 100 m/roll
SikaWrap®-450 C 0.5 m x 50 m/roll
SikaWrap®-600 C 0.5 m x 50 m/roll
DPWH Pay Item
Glass Fiber Listed Reference
SikaWrap®-430 G 0.5 m x 80 m/roll
SikaWrap®-930 G 0.5 m x 40 m/roll
Uses: Advantages:
Structural strengthening of reinforced concrete, masonry, brickwork, n Manufactured with weft fibers to keep the fabric stable (heat-set)
and timber elements or structures, to increase flexural and shear n Multifunctional fabric for use in many different strengthening
loading capacity for: applications
n Improved seismic performance of masonry walls n Flexible and accommodating of different surface planes and
n Replacing missing steel reinforcement geometry (beams, columns, chimneys, piles, walls, soffits,
n Increasing the strength and ductility of columns silos, etc.)
n Increasing the loading capacity of structural elements n Available in different widths for optimum utilization
n Enabling changes in use/alterations and refurbishment n Low density for minimal additional weight
n Correcting structural design and/or construction defects n Extremely cost effective in comparison to traditional
n Increasing resistance to seismic movement strengthening techniques
n Improving service life and durability
n Structural upgrading to comply with current standards Shelf Life:
Unlimited if stored properly
Sika®CarboDur®
Heavy-Duty CFRP Strengthening System Serviceability improvement:
n Decrease of deformation
Heavy-duty CFRP strengthening system for reinforced n Stress reduction in steel reinforcement
concrete, masonry, stonework, steel, aluminum and n Crack with reduction
timber. Change in structural system:
Sika® CarboDur® CFRP externally bonded or near n Removal of walls or columns
surface mounted plates, rods and strings; n Removal of slab sections for openings
Complies to DPWH Item-416 & ACI 440.2R Change of specifications:
n Earthquakes
Product Range: n Adjustment to changed design philosophy
Design or construction defects:
Externally bonded plate n Insufficient reinforcement
Dimension Packaging n Insufficient structural depth
Sika®CarboDur® S1012 100 mm x 1.2mm 100m/roll
Sika®CarboDur® S0512 50 mm x 1.2mm 100m/roll Advantages:
n Low in weight
Near surface mounted range n Available in any length, no joints required
n Low overall thickness
CFRP Plate Dimension Packaging n Easy to transport (rolls)
Sika®CarboDur® S212 20 mm x 1.2mm 100m/roll n Laminate intersections are simple
n Economical application -no heavy handling and installation
CFRP Rod Dimension Packaging equipment
Sika®CarboDur® BC 10 Rod 10 mm ∅ 100m/roll n Very high strength
n Available in various moduli of elasticity
Uses: n Outstanding fatigue resistance
To strengthen structures for: n No corrosion
n Loading increase n Clean edges without exposed fibers
n Increasing the live loads n General construction approval in many countries
n Increased traffic loads
n Installation of heavy machinery in industrial buildings Shelf Life:
n Changes of building utilization Unlimited if stored properly
Damage to structural parts:
n Ageing of construction material
n Steel reinforcement corrosion
n Vehicle impact
n Fire
n Earthquakes
12
STRUCTURAL STRENGTHENING
SikaWrap® FX-50 C Sikadur®-30
Carbon Fiber String for Structural Connection and Anchoring Adhesive for Bonding Reinforcement
of SikaWrap® Strengthening System Sikadur®-30 is a thixotropic, structural two-part adhesive, based on
SikaWrap® FX-50 C is a unidirectional carbon fiber string, encased a combination of epoxy resins and special filler, designed for use at
in a plastic envelope, that serves as fiber connector for the normal temperatures between +80C and +350C
anchorage of SikaWrap fabrics Packaging: Shelf Life:
6 Kg/set 24 months
Packaging: Uses:
25 m/roll Adhesive for bonding structural reinforcement,
particularly in stuctural strengthening works.
Uses: Including:
n Anchoring SikaWrap® carbon n Sikadur®CarboDur® Plates to concrete,
and glass fiber fabrics on concrete brickwork and timber
or masonry n Steel plates to concrete
n Connecting SikaWrap® carbon or
glass fiber fabrics through Advantages:
concrete or masonry structures n Easy to mix and apply
n Flexible near surface mounted n No primer needed
strengthening (NSM) n High creep resistance under
permanent load
Advantages: n Very good adhesion to concrete,
n Carbon fiber, corrosion resistant, masonry, stonework, steel, DPWH Pay Item
durable cast iron, aluminum, timber and Sika® Listed Reference
n Multifunctional use CarboDur® Plates
n Easy to install n Hardening is not affected by humidity
n High strength adhesive
Shelf Life: n Thixotropic: non-sag in vertical and overhead applications
Unlimited if stored properly n Hardens without shrinkage
n Different colored components (for mixing control)
DPWH Pay Item n High initial and ultimate mechanical resistance
Listed Reference n High abrasion and shock resistance
n Impermeable to liquids and water vapour
Sikadur®-330 Sikadur®-300
2-part Epoxy Impregnation Resin 2-part Epoxy Impregnation Resin
Sikadur®-330 is a two-part, thixotropic epoxy
based impregnating resin/adhesive Sikadur®-300 is a two-part, epoxy based
impregnating resin
Packaging:
5 Kg/set Packaging:
4 Kg/set 30 Kg/set
Uses: Uses:
n Impregnation resin for SikaWrap® n Impregnating resin for SikaWrap® fabric
fabric reinforcement for the dry reinforcement for the wet application
application method method
n Primer resin for the wet application n Primer resin for the wet application
system system
Advantages: Advantages:
n Easy mix and application by trowel n Easy mix and application by trowel
and impregnation roller and impregnation roller
n Manufactured for manual saturation n Manufactured for manual or
methods DPWH Pay Item mechanical saturation methods DPWH Pay Item
n Excellent application behaviour to Listed Reference n Good adhesion to many substrates Listed Reference
vertical and overhead surfaces n High mechanical properties
n Good adhesion to many substrates n Extra long pot life
n High mechanical properties
n No separate primer required Shelf Life:
24 months
Shelf Life:
24 months
13
INJECTION WATERPROOFING
Sikadur®-752 Sika®Injection-201 CE
Low Viscosity Epoxy Resin Injection Elastic Pur-Injection Resin for Permanent Watertight Sealing
A solvent free, 2-component super low
viscosity liquid, based on high strength Sika® Injection-201 CE is a very low
epoxy resins viscous, elastic and solvent-free
polyurethane injection resin. In contact
Complies with ASTM C881-78 Type I with water, a uniform, closed and
Grade 1, Class B & C therefore watertight pore structure
forms, which is elastic and flexible
Packaging:
5 Kg set Packaging:
20.6 Kg/set
Uses:
To fill and seal the cavities and cracks Uses:
in structural concrete such as columns, Sika® Injection-201 CE is used for permanent watertight sealing
beams, foundation, decks and water- with some flexibility to absorb limited movement, in dry, damp
retaining structures DPWH Pay Item or water-bearing cracks and joints in concrete, brickwork and
natural stone
Listed Reference Sika® Injection-201 CE can be used for the injection of the
Advantages:
Tenacious crack sealing grout SikaFuko®-System (non re-injectable)
Super-low viscosity For use in water-bearing cracks under hydrostatic pressure,
Suitable in both, dry and damp conditions preliminary injection shall be made with Sika® Injection-101 RC
High mechanical and adhesive strength
Hard, but not brittle Advantages:
No shrinkage Permanently elastic, can absorb limited movements
No shrinkage in subsequent dry conditions
Shelf Life: Due to its low viscosity it can penetrate into cracks >0.2 mm
24 months in width
Cured Sika® Injection-201 CE is inert and chemically resistant
Solvent-free
Can be injected as a one component system
Shelf Life:
36 months
JOINT WATERPROOFING
Advantages:
Sealing starts as soon as the concrete has hardened
Multi-rib profile provides impenetrable barriers to water
migration
Can be easily site welded
Good chemical resistance
Shelf Life:
Unlimited if stored properly
14
CEMENTITIOUS WATERPROOFING INTEGRAL WATERPROOFING
Sikalite® Sika®-1
Powdered Waterproofing Admixture Liquid Waterproofing Admixture
for Mortar Sika®-1 is a normal setting waterproofing
Sikalite® is a powdered waterproofing admixture for mortar and concrete
admixture, which blocks the capillaries and
pores in concrete, cement and mortars Packaging:
preventing the movement of moisture 210 L/drum
5L/container
Packaging:
800 g/plastic bag (25 pieces/box) Uses:
Sika®-1 is used for waterproofing of mortars
Uses: and concrete, in particular for:
Walls Renders, masonry mortars and screeds
Facades Reinforced and unreinforced concrete
Floor toppings Brick, concrete and stone substrates
Jointing mortars Indoor and outdoor applications, such as basements,
swimming pools, tunnels, water tanks, manholes, culverts
Advantages: Use in tropical and hot climate conditions
Easy to use
Economical Advantages:
Watertight, but vapor permeable Increased impermeability of mortar/concrete
Chloride-free Chloride-free
Easily dispersed
Shelf Life: Ready to use
12 months
Shelf Life:
24 months
Uses:
Potable water reservoirs (covered)
Tanks and cisterns (covered)
Shaft linings and lift shafts (covered)
Walls, floors and toilets & baths
Carparks, roof decks (with concrete topping)
SikaTop® Seal-107
Semi-Flexible Protective and Advantages:
Waterproofing Slurry Uniform membrane integrity due to high solid content
Certified for use in potable water tanks
Two-component, pre-dosed, ready-to-use Pre-dosed, easy to mix and use
waterproofing slurry based on resin Semi-flexible
modified cementitious material Impermeable
Packaging: Excellent adhesion on sound substrate
25 Kg/set No drying or shrinkage cracks
15
CEMENTITIOUS WATERPROOFING
Davco K11 Superflex
2 Component Flexible Hydraulic Micro-Mortar
DAVCO K11 SUPERFLEX is a two-component flexible hydraulic micro-mortar for the protection
and waterproofing of masonry and concrete structures.
Packaging:
34 kg Set Shelf Life:
Part A: 23 kg Powder 12 months
Part B: 10L Bonding Agent
Uses:
Waterproofing:
n Reservoirs, water towers, engineering structures, retention tanks, etc.,
n Under-tile sealant for swimming pools (bonded with DAVCO Dustless Heavy Duty or
DAVCO Dustless Premium), Under-tile or mortar-covering sealant for balconies, and
terraces (except terrace roofs)
n Lift shaft basements, car parks, underground premises, etc.
n Under-tile sealant for damp premises
Protection against:
Weathering (engineering structures, silos, concrete, domes etc.
Harmful water (underground tanks, water treatment stations,industrial discharge, etc.)
Please contact us regarding the compatibility of coverings with contact products
Advantages:
n Flexible hydraulic micro-mortar
n Excellent resistance to sea water & sulphated water
n Resistance to UV and micro cracking up to 4mm
16
Davco K11 Matryx
CEMENTITIOUS WATERPROOFING
Cementitious Waterproofing System For Protection Of Concrete Structures By Crystallization.
DAVCO K11 MATRYX is a cementitious waterproofing system which protects and waterproofs concrete
structures by crystallization. The active chemicals react with moisture in the concrete resulting in crys-
talline formulation within the pores and capillary tracts and concrete, thus waterproofing the structure
against penetration of water and other liquids from any direction. DAVCO K11 MATRYX gives a strong and
lasting waterproofing against dampness and ground hydrostatic pressure.
Packaging:
25kg Pail
Uses:
Recommended for use on interior and exterior below grade surfaces. DAVCO K11 MATRYX gives protec-
tion against concrete decay and waterborne corrosive salts and can be used for negative waterproofing
of concrete structure and on horizontal structural slabs against hydrostatic pressure as it provides strong
resistance to impact abrasion.
Advantages:
Easy to apply
For interior and exterior below grade surfaces
Can be used for positive & negative waterproofing
Provides strong resistance to impact and abrasion
Shelf Life:
12 months
BITUMINOUS WATERPROOFING
without extruding Excellent initial and long term adhesion
Recovery to min. 75% thickness after compression Full surface bonding
Virtually unaffected by temperature changes Zero water underflow
Low moisture absorption Crack-bridging ability
Durable and easy to handle High tear resistance
High puncture resistance
Shelf Life: Resistant to chemical corrosion
Unlimited if stored properly
Uses: Advantages:
n For new construction and renovation n Quick, simple, easy and inexpensive application.
projects n Only one layer is required, thus reducing roof load and
n Foundation waterproofing installation cost.
n Bridge and viaducts n Can be exposed directly to sun thus eliminating need for
n Under floor waterproofing protective coating (concrete or tiles).
n Concrete, metal or timber decks n No kettle or hot asphalt required.
n No height restriction on application.
17
BITUMINOUS WATERPROOFING
Sika® Bituseal T-130 SG/T-140 SG
Torch-on Sheet Waterproofing Membrane Based on APP Modified, Reinforced Bitumen, with Sand Broadcast
Surface – Flexible to 0oC
Packaging:
Thickness Packaging Shelf Life:
T-130 3mm 1 x 10m (30 rolls/pallet) 24 months
T-140 4mm 1 x 10m (23 rolls/pallet)
Uses:
Waterproofing and damp-proofing of the exterior walls of basements against percolating water and damp soil
Retaining walls
Flat roofs under protective layers or ballast
Flat and exposed roofs and under tiles
Advantages:
Resistant to ageing
Resistant to weathering
Good tensile strength and elongation
High resistance to water vapour (non-vapour permeable)
Good dimensional stability
Flexible at low temperatures
Not resistant to root penetration
Suitable as top layer for multi-layer installations
Good resistance to mechanical impact
Must be installed on suitable primed, uniform and smooth substrates such as concrete and brickwork
Advantages:
Single component, ready to use Advantages:
Easily applied by spray roller or brush Alkali resistance Excellent UV stability
Fast-curing to a durable, flexible consistency Reduce construction time Impermeable
Excellent adhesive and elongation properties Easy application Crack-bridging ability
Designed for use on new and existing structures High elasticity Low consumption
Sikalastic®-110
High Elasticity, 1-part Polyurethane Bituminous Waterproofing Coating
Sikalastic®-110 is a water-based 1-part modified polyurethane/bituminous coating,
formulated to form a highly elastic, seamless and crack bridging membrane
18
LIQUID APPLIED MEMBRANES
Sikalastic®-590 Sikalastic-870BT
Economical Liquid Applied Roof Waterproofing Spray applied Polyurea membrane
with Improved Ponding Water Capability
Sikalastic -870 BT is a two part,
Sikalastic®-590 is a one component elastic, 100% solids, very fast curing
polyurethane-acrylic dispersion with Polyurea spray applied membrane
improved water ponding resistance/ excellent where exposure to high acidic and
UV resistance, good crack-bridging alkaline chemical concentrations
capacity and great aesthetics. are present. Sikalastic -870 BT is for
For manual / spray application, Sikalastic®-590 machine application only.
can be appied as coating or a reinforced liquid
applied membrane with Sikalastic® Fleece
Packaging:
Packaging: Part A: 200.0 kg drum
20 Kg/pail Part B: 175.0 kg drum
Part C: 15.0 kg can
Uses:
For waterproofing solutions in both new construction and Uses:
refurbishment projects For waterproofing applications on steel and concrete.
For roofs with many details and complex geometry when Typical uses on:
accessibility is limited Primary and secondary containments
For cost-efficient life cycle extension of failing roofs Waste water treatment plants
For reflective coating to enhance energy efficiency by reducing Fertilizer plants and transportation
cooling costs (Sikalastic®-590 White) Mines and mining processes
Ballast tanks
Advantages: Silage tanks and troughs
Good behavior under limited water ponding Sludge digesters
UV resistant and resistant to yellowing and weathering
Highly elastic and crack-bridging
Non-toxic and VOC compliant water-based coating Advantages:
One-component - ready to use High acidic and alkaline chemical resistance
Excellent adhesion on porous and non-porous substrates High resistance to microbial waste
Seamless waterproofing membrane Fast reactivity and cure time
Water vapour permeable Almost immediate return to service time
Applicable in temperature from -15°C to 70°C
Shelf Life: Performs in constant temperatures from -30°C to 60°C
12 months 100% solids
Crack-bridging properties
Shelf Life
Part A: 6 months
Part B: 12 months
Part C: 12 months
Packaging: Packaging:
21 kg pails 20kg bag
Uses: Uses:
Exposed or concealed waterproofing membrane on flat or All types of roofs, balconies and decks
pitched roofs both for new construction and refurbishment of Retaining walls and basements
old roofs. Waterproofing and planter boxes
For concealed application Eliminates soldering of cracked non-ferrous roof valleys and
flashings
Advantages: For exposed application
1 component pure polyurethane
1 material for horizontal / vertical areas Advantages:
1 hour early rain resistant Easy to apply
UV resistant Excellent tensile strength
High solid content Protects against root penetration
Seamless
Shelf Life: Remains effective under extreme weather conditions
6 months
Shelf Life
12 months
19
Sarnafil G410 Felt / Non- Felt PVC Membrane Sarnafil S327 PVC Membrane
ROOF WATERPROOFING
Polymeric Detailing Membrane For Roof Waterproofing Polymeric membrane for roof waterproofing
Sarnafil® G 410 L is a multi-layer, Sarnafil® S 327 L is a polyester reinforced,
synthetic roof waterproofing detailing multi-layer, synthetic roof waterproofing
membrane based on premium-quality membrane based on premium-quality
polyvinyl chloride (PVC) with an inlay of polyvinyl chloride (PVC).
glass non-woven.
Sarnafil® S 327 L has a unique lacquer
Sarnafil® G 410 L has a unique lacquer coating applied to the top of the mem-
coating applied to the top of the mem- brane
brane to reduce staining from airborne to reduce staining from airborne dirt and
dirt and pollutants. pollutants.
Packaging: Packaging:
1.2 mm 25.0m (approx. 82 kg per roll) 1.2 mm 25.0m (approx. 82 kg per roll)
1.5 mm 20.0m (approx. 78 kg per roll) 1.5 mm 20.0m (approx. 78 kg per roll)
2.0 mm 15.0m (approx. 81 kg per roll) 2.0 mm 15.0m (approx. 81 kg per roll)
Uses: Uses:
Waterproofing detailing membrane for: Waterproofing membrane for:
Exposed flat roofs (Sarnafil® S 327 L or Sarnafil® G 410 L Felt) Mechanically fastened, exposed flat roofs
Concealed flat roofs (Sarnafil® G 476)
Advantages: Advantages:
Outstanding resistance to weathering, including permanent Outstanding resistance to weathering, including permanent
UV irradiation UV irradiation
Excellent weld ability Excellent weld ability
Excellent flexibility in cold temperatures Excellent flexibility in cold temperatures
Excellent dimensional stability High dimensional stability
High water vapour permeability High tensile and tear strength
High solar reflectance (in case of white color top layer) High resistance to mechanical impact
Available in various colors High water vapour permeability
Reduced dirt pick-up due to lacquer coating High solar reflectance (in case of white color top layer)
Recyclable Available in various colors
Reduced dirt pick-up due to lacquer coating
Shelf Life Recyclable
Product does not expire if correctly stored.
Shelf Life
Product does not expire if correctly stored.
Uses:
Waterproofing membrane for:
Loosely laid applications
Planted roofs
Detailing
Packaging:
Length : 25 m
Width : 2.0 m
Thickness : 1.5 mm
Mass per unit area : 1.84 kg/m2
Tensile strength,
Longtitudinal (MD) : ≥ 10N/mm2
Transversal (CMD) : ≥ 10N/mm2
Elongation,
Longtitudinal (MD) : ≥ 180 %
Transversal (CMD) : ≥ 180 %
20
PASSIVE FIRE PROTECTION SOLUTIONS
PRODUCTS FOR LINEAR SEALS
Please contact our Technical Specialist to further assist you on your requirements for Passive Fire Protection
21
PASSIVE FIRE PROTECTION SOLUTIONS
Please contact our Technical Specialist to further assist you on your requirements for Passive Fire Protection
22
POLYURETHANE SEALANTS
Sikaflex® PRO-3
High Performance Sealant for Trafficable Advantages:
and Specialty Joints n High movement capability
n Very high mechanical and chemical
resistance
Sikaflex® PRO-3 is a one-component, moisture curing, n Bubble-free curing
elastic joint sealant with high mechanical and chemical n Solvent-free
resistance n Water resistant
Packaging: n Diesel and jet fuel resistant
600 ml sausage (20 pieces per box) n Very low emission
n Good adhesion to most construction
Color: materials
Concrete Grey n Can be overpainted (over paintability
test must be conducted
Uses: Movement Capability:
Movement and connection joints in floors ±35% (ASTM C 719)
Pedestrian and traffic areas (e.g. parking decks, car parks)
Warehouses and production areas Shelf Life:
Applications in the food industry 15 months
Joints in waste water and sewage treatment plants
Floor joints in tunnel construction
Applications in cleanrooms
23
POLYURETHANE SEALANTS
Lanko 603
General Purpose PU Sealant
Lanko 603 is a single-component polyurethane sealant. Easy application on most materials:
concrete, stone, brick, roof-tiles, ceramic tiles, PVC, aluminum, wood, glass.
Packaging:
600ml sausage
Uses:
n Heavy and light prefabricated constructions, traditional masonry
n Expansion joints in concrete structures
n Bridging joints between prefabricated elements
n Sealing joints in facades, boards, siding metal constructions
n Sealing joints and weatherstripping in woodwork and aluminum
n Sealing roof-tiles and ceramic tiles
Advantages:
n Suitable for joint subject to movement
n Resilient to weathering and rust-inducing conditions
n Can be overpainted (over paintability test must be conducted)
Shelf Life:
6 months
Sika® Boom AP
High Yield Expanding Foam
Packaging:
500 ml, 750 ml (12 pieces per box)
PU FOAM & MULTIPURPOSE ADHESIVE
Color:
Light yellow
Uses:
Used for fixing, insulating and filling connection joints around window and door frames,
pipe entries around air conditioning vent and roller blind housing, etc.
Used to insulate against sound, cold, draughts, etc.
Advantages:
n Multi-positioning foam. Can be applied in all positions (360o)
n High expansion rate
n Fast-curing
n Easy application with nozzle
n Very good thermal and sound insulation
n HFC-free
n Can be cut, sanded and overpainted (over paintability test must be conducted)
Shelf Life:
18 months
Uses:
An adhesive to bond most construction components,
such as:
n Skirting boards n Mouldings
n Wooden frames n Hard PVC profiles
n Battens n Sheet boards
n Panels n Metal protection angles
Advantages:
n Easy to apply
n Rapid initial grab after flash off
n Rapid strength gain
n Wide adhesion range
24
PRIMER & AUIXILLARY
Sika® Primer-3 N Sika® Heavy Duty Gun
Solvent-based Primer for Porous Substrates and Metals 2 in 1 gun for sealant application
Sika® Primer-3 N is a solvent-based, one-component
primer Packaging:
1 piece per pack
Packaging:
1 Liter bottle (4 pieces per box) Use:
Use for cartridge and 600ml sausage sealants
Color:
Transparent
Uses:
Designed for Sikaflex®, SikaHyflex, and Sikasil®
products used on porous substrates (e.g. concrete)
and metals
Advantages:
n Easy to apply
n Water repellent
n Short flash-off time
Shelf Life:
9 months
Sika® MultiSeal AP
Bituminous Sealing Tape
Sika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape
laminated with an aluminium foil on the upper side.
NEW!
Packaging: Color:
3m x 50mm (24 rolls per box) Matt grey
3m x 100mm (12 rolls per box)
Uses:
Sika® MultiSeal AP is designed for sealing and repairing applications
against water ingress on roofs and any other building element.
Advantages:
Very easy to apply
Good adhesion to many substrates
Weather proof
Self-adhering
Compatible with bituminous substrates
Can be over-painted
Can be applied at low temperatures
25
SILICONE SEALANTS
Sikasil® SG-18 Sikasil WS-305KR
One-Part Neutral-Curing Structural Silicone Adhesive Weatherproofing Sealant
Sikasil® SG-18 is a neutral-curing silicone adhesive One-part, silicone-based, moisture curing,
with excellent adhesion to a wide range of substrates low modulus elastic weather sealant
Packaging:
Sikasil® SG-18 is manufactured in 600ml sausage (20 pieces per box)
accordance with ISO 9001 quality Color:
assurance system and the Black, White, Grey
Responsible Care Program
Uses:
Packaging: For weatherproofing and sealing applications where
600ml sausage (20 pieces per box) durability under severe conditions is required
Color:
Black Advantages:
Ready-to-use, one-part sealant
Uses: Neutral-curing
Structural glazing adhesive and other bonding applications UV and weathering resistant
where superior resistance to UV radiation, high temperature and Highly flexible
weathering is required Complies with ASTM C920 class 50, TT-S 001543 A,
TT-S-00230 C, EN 15651-1, -1 (F EXT-INT CC 25LM, G CC 25 LM)
Advantages:
One-part structural glazing system Movement capability:
Neutral-curing ±50%
UV and weathering resistant
High mechanical strength Shelf Life:
Ready to process 15 months
High modulus
Complies with ASTM C1184, ASTM C920 class 12.5,
ETAG 002, EN 1279-2
Movement capability:
±12.5%
Shelf Life:
12 months
Sikasil® SG-500 CN
Two-Part, Neutral-Curing, Structural Silicone Adhesive
Sikasil® SG-500 CN is manufactured in accordance with ISO 9001/14001 quality assurance system
and the Responsible Care Program
Packaging:
Component A - 260 Kg Drum
Component B - 20 Kg Pail
Uses:
For structural glazing and similar high demanding industrial application
Advantages:
Two-part structural glazing system
For machine application
Neutral-curing
Fast vulcanization and through-cure
Excellent UV and weathering resistance
High mechanical strength
Complies with ASTM C1184 ASTM C920 class 25, GB 16776-2005
Movement capability:
±12.5%
Shelf Life:
Part A - 15 months
Part B - 12 months
26
EPOXY FLOORING
Sikafloor®-161 HC Sikafloor®-263 SL HC
Two-Part Epoxy Primer, Levelling Mortar, Two-Part Epoxy Self-Smoothing
Intermediate Layer and Mortar Screed and Broadcast System
Sikafloor®-161 HC is an economic, two part, Sikafloor®-263 SL HC is a two-part, economic
solvent free, low viscosity, epoxy resin and multi-purpose binder based on epoxy resin
Packaging: Packaging: Shelf Life:
10 Kg/set, 20 Kg/set 20 Kg/set 24 months
Uses: Uses:
For priming concrete substrates, Self-smoothing and broadcast system for
cement screeds and epoxy mortars concrete and cement screeds with normal
For normal to strong absorbent up to medium heavy wear (e.g. for storage
substrates and assembly halls, maintenance
Binder for leveling mortars and workshops, garages, loading ramps, etc.)
mortar screeds The broadcast system is recommended for
Intermediate layer underneath wet process areas, e.g. in beverage industry,
Sikafloor®-263 SL HC and Sikafloor ®-264 HC food industry, maintenance hangars etc.
Advantages: Advantages:
Shelf Life: Highly fillable
Low viscosity 24 months
Good penetration Good chemical and mechanical resistance
Excellent bond strength Easy application
Solvent-free Economical
Easy application Liquid proof
Short waiting time Solvent-free
Multi-purpose Gloss finish
Slip resistant surface possible
Sikafloor®-264 HC Sikafloor®-381
Two-Part Epoxy Roller and Seal Coat 2-Part Epoxy Coating With High Chemical
Sikafloor®-264 HC is a two-part, economic, And Mechanical Resistance
solvent-free colored epoxy resin
Sikafloor®-381 is a 2-part self-smoothing epoxy
Packaging: Shelf Life: coating, highly chemically and mechanically
20 Kg/set 24 months resistant
Uses: Packaging: Shelf Life:
Roller coat for concrete and cement screed 25 Kg/set 24 months
with normal up to medium heavy wear e.g.
storage and assembly halls, maintenance Uses:
workshops, garages and loading ramps Chemically and mechanically highly resistant
Seal coat for broadcast systems coating for concrete and screed surfaces in bund
areas for protection against water
Advantages: contaminating liquids
Good chemical and mechanical resistance
Easy application Advantages:
Economical High chemical resistance
Liquid proof High mechanical resistance
Solvent-free Liquid proof
Gloss finish Abrasion resistant
Slip resistant surface possible Slip resistant surface possible
Advantages:
Decorative with endless finish combination achievable
Good chemical and mechanical resistance
Easy application
Economical
Solvent-free
Tight, semi glossy surface
Matt finish possible
27
POLYURETHANE FLOORING
Sikafloor®-21 PurCem LP
Medium To Heavy Duty, Self-Smoothing, Polyurethane Hybrid Flooring Screed
Sikafloor®-21 Purcem LP is a three part, water dispersed medium to high strength
coloured polyurethane modified, cement and aggregate screed with self
smoothing properties.
Uses:
Sikafloor®-21 PurCem LP may only be used by experienced professionals. Sikafloor®-21 Purcem LP is used as a
scratch coat primer, basecoat and wear coat layer in Sikafloor®PurCem system build ups, in areas of medium to
heavy loading, high chemical exposure and abrasion, such as in:
Food processing plants (wet or dry process areas, freezers
and coolers)
Chemical plants
Laboratories
Workshops
Advantages:
Good chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Please refer to the Chemical Resistance Chart or consult your local Technical Department
Similar coefficient of thermal expansion to concrete, allowing movement with the substrate through normal
Thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from
-5 °C up to +65 °C
Bond strength in excess of the tensile strength of concrete. Concrete will fail first
Non tainting / odourless
VOC free
High mechanical resistance. Behaves plastically subject to impact. Will deform but will not crack or debond
High abrasion resistance resulting from its silica aggregate structure
Can be applied to substrates with high moisture content (7 days old or mature damp concrete)
Jointless. Extra expansion joints are not necessary; simply maintain and extend existing expansion joints
up through the Sikafloor® -PurCem flooring system
Easily maintained
Uses: Advantages:
In areas subject to heavy loading, abrasion and high chemical Excellent chemical resistance
exposure, to provide a 6 to 9 mm thick, hard wearing surface, High mechanical resistance
such as in: High abrasion resistance
Food process plants Steam cleanable at 9 mm thickness
Chemical plants Thermal resistance
Processing areas Slip resistance
Laboratories Easily maintained
Workshop Fast curing
Easy to apply
Durable
Jointless
Matte finish
28
POLYURETHANE FLOORING
Sikafloor®-31 PurCem® LP
Solvent Free Polyurethane Coating
Sikafloor®-31 PurCem® LP is a three part, solvent free, high build, coloured, matt finish, polyurethane modified, cement and aggregate coating
with excellent chemical resistance and very good resistance to abrasion and mechanical damage. Typically applied in two coats for a total of
0.2 - 0.25 mm.
Packaging: Shelf Life
Part A: 1.60 kg plastic drum Part A : 12 months from date of production. Protect from freezing.
Part B: 1.40 kg plastic jerrycan Part B : 12 months from date of production. Protect from freezing
Part C: 1.70 kg plastic bags Part C : 6 months from date of production. Must be protected from
Part A+B+C: 4.7 kg ready to mix units humidity
Uses:
Sikafloor®-31 PurCem® LP may only be used by experienced professionals. Sikafloor®-31 PurCem® LP is designed to be used as:
Stand alone, high build coating or as a seal coat for covings and details performed with Sikafloor®-29 PurCem® LP or other products
in the Sikafloor®- PurCem® range
To provide an improved aesthetic finish to the products in the broadcast texture range of Sikafloor®-PurCem®
Suitable for concrete protection providing physical resistance (Principle 5, method 5.1 of EN 1504-9)
Suitable for concrete protection providing chemical resistance (Principle 6, method 6.1 of EN 1504-9)
As a chemical resistant concrete coating in places such as:
Food processing plants, in wet or dry process areas, freezers and coolers Containment areas
Pharmaceutical plants Chemical process areas
Advantages:
Excellent chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents
Allows use of severe cleaning regimes in the Food and Beverage industry. Please refer to the Chemical Resistance Chart or consult your
local Technical Dept.
Very low VOC emissions
Water based Odourless formulation
Excellent long term wear resistance from a two coat application
Rapid one step application. Normally, no concrete primer required
Economical and easy to apply
Good hiding power
Tolerant to substrate moisture. Can be applied on to 7 to 10 day old concrete after adequate preparation and with a tensile bond
strength in excess of 1.5 N/mm2 (218 psi)
Bio-static surface. Does not contribute to the growth and development of bacteria or fungi.
Wide range of application temperatures +10°C - +35°C
Sikafloor®-29 PurCem LP
High Strength Polyurethane Coving And Detailing Mortar
Sikafloor®-29 PurCem LP is a three, water dispersed, vertical grade, coloured polyurethane modified, cement and aggregate mortar
for detailing work and vertical rendering. It has a finely textured smooth aggregate appearance which offers excellent resistance to
abrasion, chemical attack and mechanical damage. Typically installed at 3 - 9 mm thickness.
Packaging: Shelf Life
Part A: 1.60 kg plastic drum Part A : 12 months from date of production. Protect from freezing.
Part B: 1.40 kg plastic jerrycan Part B : 12 months from date of production. Protect from freezing
Part C: 19.00 kg plastic lined, double paper bags Part C : 6 months from date of production. Must be protected from
Part A + B + C : 22.0 kg ready to mix units humidity
Uses:
Sikafloor®-29 PurCem LP may only be used by experienced professionals. In combination with the rest of the PurCem® range in
concrete substrate areas, to provide vertical, coving and detailing solutions in areas of abrasion and high chemical exposure, such as in:
Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
Chemical plants
Laboratories Suitable for concrete protection providing physical resistance (Principle 5, method 5.1 of EN 1504-9)
Workshops Suitable for concrete protection providing chemical resistance (Principle 6, method 6.1 of EN 1504-9)
On properly prepared and supported steel surfaces, such as in:
Steel decks
Overpasses or platforms
Advantages:
Excellent chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents
Please refer to the Chemical Resistance Chart or consult your local Technical Dept
Designed specifically for trowel applications to vertical surfaces
Similar coefficient of thermal expansion to concrete, allowing movement with the substrate through normal thermal cycling. It will
perform and retain its physical characteristics through a wide temperature range from -40 °C (-40 °F) up to +140 °C (284 °F)
Bond strength in excess of the tensile strength of concrete. Concrete will fail first
Non taint, odourless
VOC free
High mechanical resistance. Behaves plastically subject to impact. Will deform but will not crack or debond
Slip resistance. Natural textured surface provides anti-slip traction
High abrasion resistance resulting from its silica aggregate structure
It is possible to apply on to 7 to 10 day old concrete after adequate preparation and with a tensile bond strength in excess of
1.5 N/mm2 (218 psi)
Sikafloor®-29 PurCem LP detailing mortar can withstand moisture vapor transmission values of 12 lbs/1000 ft2 when tested in
accordance with the ASTM F 1869 Anhydrous Calcium Chloride Test Method
Fast curing will allow foot traffic after twelve hours and full service after two days. Production downtime is cut to an absolute minimum
Jointless. Extra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the
Sikafloor®-PurCem® flooring system
Easily maintained
Wide range of application temperatures +10 °C - +35°C
29
POLYURETHANE FLOORING
Sikafloor®-315
Abrasion Resistant Aliphatic Polyurethane Seal Coat.
Sikafloor® -315 is a three and four parts, high solids, abrasion resistant, aliphatic
polyurethane based textured coatings.
Packaging: Pigmented Set
Un-Pigmented Set Part A: 2.83 kg
Part A: 2.83 kg Part A: 2.83 kg Part B 0.42 kg
Part B: 0.42 kg Part B: 0.42 kg Part C 2.13 kg (filler)
Part C: 2.13 kg (filler) Part D: 0.62 kg(pigment pack)
Part A+ B+C: 5.38 kg/set Part A+ B+C+D: 6.0kg/set
Uses: Advantages:
Seal coat for Sikafloor epoxy floors High Solids
High traffic areas requiring wear resistant coatings Excellent abrasion, wear , impact resistances
Shelf Life Good UV resistance, non-yellowing
12 months from date of production if stored properly in Textured surface
original, unopened and undamaged sealed packaging in dry Good Chemical Resistance
conditions at temperatures between +5°C and +30°C. Available un-pigmented (3 parts) and pigmented (4 parts)
30
CEMENTITIOUS FLOORING
Lanko 162 RD Flow Prime
Bonding Primer Uses:
Reinforced concrete
LANKO 162 RD FLOW PRIME is a bonding primer which Precast concrete panels
creates a bonding key on smooth and sealed substrates Traditional rendering
or porous substrates. It improves the condition of the
surface, the bonding strength of the mortar and
reduces the bubble effect [pin hole], absorption Advantages:
capacity of the substrate. Creates a bonding key
Improves the bonding strength
Reduces the bubble effect
Packaging: Shelf Life: Easy to use
20L container 12 Months
31
CEMENTITIOUS FLOORING
Lanko 196 Floor Screed
Used as a normal screed on new concrete substrates, or to repair old worn-out
substrates in housing estates or industrial floors
LANKO 196 FLOOR SCREED is a ready-to-mix cementitious floor screed. It is ideal for
casting onto new or old concrete floors with 10-40mm application thickness.
Packaging:
25kg bag
Uses:
LANKO 196 FLOOR SCREED is suitable for use as a normal screed on new concrete substrates,
or to repair old worn-out substrates in housing estates or industrial floors. It can be used for
internal and external applications.
Advantages:
Premixed to ensure good consistent quality and mix
Easy to use by simply adding water
Prepacked for convenience in handling
Good weather resistance and high durability
Shelf Life:
12 months
Uses:
Sikafloor® CureHard-24 may only be used by Uses:
experienced professionals. Sikafloor®-3 QuartzTop P may only be used by experienced
Horizontal old or new concrete surfaces, where a hard surface professionals.
with light to moderate abrasion resistance is required e.g. Sikafloor®-3 QuartzTop P provides a hard wearing, mineral dry
warehouses, industrial plants, stores, shopping malls, parking shake topping for monolithic floors. When sprinkled and
structures, service stations, hangars etc. trowelled into fresh wet concrete floors, it forms a colored wear
On concrete slabs where no specific curing efficiency or standards resistant smooth surface.
are required Typical users are in warehouses, factories, shopping malls,
Suitable for interior or exterior applications public areas, restaurants and museums.
Dust-proofing of prefabricated concrete elements
Suitable for protection against ingress (Principle 1, method 1.2 of
EN 1504-9) Advantages:
Suitable for physical resistance (Principle 5, method 5.2 of EN Good wear resistance rating
1504-9) Impact resistance
Cost effective surface hardener
Advantages: Dust proof
Ready to use Easy cleaning
Easy to apply Increase resistance to oils and grease
Improved chemical and abrasion Quality assured factory blending
resistance compared to untreated Wide range of colours
concrete Suppresses fibres in concrete
Reduced dusting of concrete floors
Slightly reduces loss of water of
new concrete while setting
Improves cleanability
Non-yellowing
Good penetration
Solvent free
Colourless and
odourless
32
ACCESSORIES
Extender T Sikadur 501
Thickening Agent For Sikafloor® Flooring Resins Sikadur 501 is a light colored kiln dried
graded quartz sand for used in Sika
Sika® Extender T is an inert, fine, white, fibrous polymer powder coatings and membranes to provide a
used as a thickening agent for Sikafloor® flooring resins. mechanical key for subsequent levelling
Packaging: materials.
1kg pail
It can also be used to bulk out certain
Uses: Sika screeds and mortars as well as
Applications on horizontal surfaces being used as an anti-slip additive.
to create custom surface textures
Applications on vertical surfaces to Available in three grain sizes:
hold the resin in place during curing
Crack and pore filler to seal Item Size (mm)
horizontal and vertical surfaces SikaDur 501 #5 0-0.3
Advantages: SikaDur 501 #4 0.3-0.71
Allows for viscosity adjustment of Sikafloor® product SikaDur 501 #3 0.71-1.7
applications
Economical, easy to mix and use
No effect on pot life or cure rate
Low addition rate required to change resin viscosity
Non carcinogenic
Inert and non-reactive
Shelf Life
24 months
Sikagard®-62
2-Part Epoxy Protective Coating
Sikagard®-62 is a 2-pack total solid (acc. test method of “Deutsche Bauchemie*) high build coating
material based on epoxy resin
Uses: Packaging:
Abrasion-resistant universal coating material designed for normal 10 Kg/set
to moderately aggressive chemical environments
Sikagard®-62 is suitable for use on concrete, stone, cementitious Shelf Life:
mortars and renderings, epoxy-cements (EpoCem®), 12 months
epoxy mortars and steel
For linings to storage tanks and silos, bund areas Advantages:
Anti-corrosion coating in food-processing plants, sewage works, Total solid
farms and agricultural enterprises, chemical and pharmaceutical Good chemical and mechanical resistance
plants, beverage industries and bottling plants Easy to mix and work
Also used as part of glass fiber-reinforcement self-supporting High-build
linings with crack-bridging properties on bund areas and storage Impervious to liquids
tanks
33
BUILDING FINISHING WALL SOLUTIONS
Lanko 103 PH Lankowall Lanko 101 PH Parenduit
Ready-To-Use Smooth Skim Smooth Skim Rendering Paste
Rendering Paste
LANKO 101 PH PARENDUIT is a smooth
LANKO 103 PH LANKOWALL is a ready-to- skim rendering paste for thickness 0.3
use smooth skim rendering paste for thick- – 4.0 mm to be mixed with cement or
ness 0.3 - 4mm used to level surface defects gypsum for eliminating grooves, seams
in concrete or render. and rock pockets in concrete surfaces to
obtain a perfectly smooth finish.
Packaging:
5 kg and 20kg pail Packaging:
5 kg and 20kg pail
Uses:
Can be applied for Uses:
interior and exterior Interior and exterior walls and ceilings from
walls and ceilings 0.3 - 4mm thickness. 0.3mm to 4mm thickness.
Interior / Exterior Interior Only
Shuttered Concrete Bricks Interior / Exterior
Reinforced concrete shell-work Gypsum block or board Reinforced concrete
Precast concrete Gypsum (consult website) Precast concrete panels
Concrete Soffits Lightweight concrete block Traditional rendering mortars
(with primer)
Interior only
Possible covering materials: Thick plastic coating, paint, Lightweight concrete or
wallpaper, fabric and bonded plastic lightweight block (with primer)
Gypsum Board (in gypsum mix)
Advantages:
Ready-to-use and easy to apply Advantages:
Perfectly white smooth finish Perfectly smooth finish
For interior and exterior use High bonding strength
Can be exposed or painted (no primer needed) For interior or exterior use
Can be exposed or painted on (no primer needed)
Shelf Life:
12 months Shelf Life:
12 months
Packaging:
25 kg bag
Uses:
n Interior and exterior walls and ceilings from 2mm to 10mm thickness
n Reinforced concrete
n Precast concrete
n Precast concrete panels
n Traditional rendering
Advantages:
n Easy to use
n High bonding strength
n For interior and exterior application
n Compatible with decorative wall coverings
Shelf Life:
12 Months
34
BUILDING FINISHING WALL SOLUTIONS
Parex 533 Sand Smooth Parex 534 Sand Fine
Acrylic-Based Textured Finishes For Use Acrylic-Based Textured Finishes For Use
On Various Surfaces On Various Surfaces
PAREX 533 SAND SMOOTH is an Acrylic-based PAREX 534 SAND FINE is an Acrylic-based
textured finish for use on various surfaces. It textured finish for use on various surfaces.
provides instant fine texture upon application. It provides instant fine texture upon
application.
Packaging:
30 kg Pail Packaging:
30 kg Pail
Uses:
Exterior or interior finishes for top coating: Uses:
n EIFS Exterior or interior finishes for top coating:
n Properly prepared masonry, stucco and n EIFS
concrete surfaces n Properly prepared masonry, stucco and concrete surfaces
n Interior application over drywall, plaster or properly prepared n Interior application over drywall, plaster or properly prepared
masonry or concrete masonry or concrete
Advantages:
Advantages: n DPR (Dirt-Pick-up Resistance) Chemistry
n DPR (Dirt-Pick-up Resistance) Chemistry n Integrally colored with high-quality pigments
n Integrally colored with high-quality pigments
Shelf Life:
Shelf Life: 12 Months
12 Months
35
BUILDING FINISHING WALL SOLUTIONS
Parex 121 Optimum
Basecoat and Adhesive
PAREX 121 OPTIMUM can be used as a basecoat for Parex EIFS and other architectural coatings. It can also be an
adhesive used to laminate EPS to common substrates. PAREX 121 OPTIMUM can be applied without the addition
of cement and mixed onsite with water. It is bent in class workability and features an extended pot life.
DAVCO Parex 201 Stuccowall is a white cement based exterior wall finish. It is ready-to-wet
and requires minimal maintenance.
Packaging:
25 kg net weight
Coverage:
Coverage will vary depending on substrate, thickness and texture of the application.
Shelf Life:
12 Months
Uses: Uses:
n Aids finishes in resisting chalking n Protects finishes from harmful UV light
n A protective exterior acrylic-based coating. Compatible with n Well-suited for use with darker colors to increase fade
Parex finishes. resistance
n Masonry Sealer n Aids finishes in resisting chalking
n A protective exterior acrylic-based coating. Compatible with
Shelf Life: Parex finishes.
12 Months n PAREX 610 for application requiring reduced gloss
n Masonry Sealer
36
BUILDING FINISHING TILING SOLUTIONS
Davco Dustless Premium
Premium Grade (C2S1 classification) TTB Tile Adhesive For All Types
Davco Dustless Premium is a premium grade, thick or thin bed, cement-based tile adhesive
specifically formulated to provide higher coverage, easier application, longer open time and
high bond strength. It has low shrinkage capability.
Packaging: Shelf Life:
25kg bag 12 months
Uses:
Types of Tiles: Suitable for porous and non-porous tiles i.e glass mosaics,glazed glass
ceramics, granite, slate and natural stones.
Substrates:
n Walls/floors, interior/exterior application
n Concrete, cement renders / screeds, block work,rendered brickwork and mortar leveling
n Smooth and even lightweight concrete block or thick bed application to level uneven parts
n Waterproofing membranes and immersed area especially swimming pools
Advantages:
n Easy-to-use, just mix with water or n Use on both walls and floors
DAVCO Davelastic n Interior and exterior application
n High bond strength n Can be used for tile-on-tile application
n Higher coverage
Uses: Uses:
Can be used to lay tiles onto concrete, cement render, block work For standard sized tiles (up to 60cm x 60cm) and all porous tiles
and rendered brickwork surfaces. It can be used on walls and such as ceramic tiles, ceramic mosaics and baked clay tiles onto
floors in both interior and exterior applications. (For consultation rendered concrete. tiles onto rendered concrete.
on tile sizes) Advantages:
n Can be used for internal and external floors,
Advantages: internal walls (for consulation, depending on tile size).
n Easy - to - use, just mix with water or DAVCO Davelastic n Easy to use, just mix with water or DAVCO Davelastic.
n High bonding strength n Can be used to lay tiles in wet areas such as
n Non-toxic, non-flammable shower floors etc.
n Quick grip n Non-toxic, non-flammable
n Easy mixing and tiling, saves time and costs
37
SIKA® FULL RANGE SOLUTIONS
FOR CONSTRUCTION & INDUSTRY
Concrete Refurbishment Waterproofing
WHO WE ARE
Sika AG, Switzerland, is a globally active specialty chemicals company. Sika supplies the building and
construction industry as well as manufacturing industries (automotive, bus, truck, rail, solar and wind
power plants, facades) Sika is a leader in processing materials used in sealing, bonding, damping,
reinforcing and protecting loadbearing structures. Sika’s product lines feature high quality concrete
admixtures, specialty mortars, sealants and adhesives, building finishing solutions, damping and
reinforcing materials, structural stregthening systems, industrial flooring as well as roofing and
waterproofing systems.
SIKA PHILIPPINES
Sika Philippines Inc., a wholly-owned subsidiary of the Sika Group, has been serving the Philippine
Market since March 1994.
Like us on
@Sika Philippines Website: phl.sika.com
@Davco Philippines www.davco.com.ph