=e
B&E Blo-téchnolbgy Co.,Ltd.
| 10 Baoan Rood.Lashan istic, Yprisi $0,2640C, China
|| ter +26-sasfersera1 Fax +86:535.6718080,
User manual of Reagent Pack e
Calibration Pack pee : 7 iL .
CBS-400 |
Intended Use For In Vitro Diagnostic Use Only)
Calibration Pack is a reagent pack that used|on the Electrolyte Analyzer CBS-400. It is for call
potassium chloride Calcium and pH In the CBS-£00 electrolyte analyzer.
Composition —
‘Standard A 530ml , Standard B 210m! Standard C 2
Principles of Procedure: CBS multi-sensor hi
Reference Souton 0m
tre ion slecve leases (SE) messing k
‘concehtration of sodium,
potassium.chlride Calcium and pH in sample. Anot}er chore electrode Is integrated in Gdtridge as a reference Plectrode, Each ton
selective membrane undergoes a Specific reaction with fe lon contained in the sample. The membrane reacts fo the dHference of potential
‘of sample and the standard solution A and calculation] Then ion concentration in the sample isdetermined.
‘Sample Requirements:
41. The samplo of whole blood should be collected inthe heparinized syringe and should be analyzed as soo} as possible,
2. The sample of plasma shoud be collected from ntrfuge the heparinize blood fast and derive from the RBC, and then seal in the
tubes.
3 The slip of set should be collected inthe tfgod colectig tabes and centitige’90 minutes later’ anf thei get rid ofthe cot and ~ ~
then seal inh tubes. |
4, Urine samples should be collected at random accofding tothe regulations or 24 hours ure.
Tasting Method: Under the room temperature, “elting the reagent peck and then run if ut calibration procajure ofthe analyzer,
‘When callbrating is OK, the sample testing could be start.
Refer Value: Itwas made according to the refer value which is set by CBS-400 and clinical ¢
Nat 141—155 mmol. K"3.6-5.5 molt. Cr97— 111 mio, Ca" 4.05-1.35 mmol
Limitation: User eho eons te possible xi en veo the rest bie th te clinical roactio}. Because the drug
Using or the inner uncertain inficts of the material, the doctor or the lab staff should calculate the testing result of the patient
Assay valus | 1
PH KT mel | Nat mmo | (Cr mmo | Ca |mmolt
Standard tl 7.480. 4.0204 140.010.0 125.0210.0 0.90103)
StandardB || 6820.3 16.0215, 3501100 | 1'41.0210.0 1.50103
Reference Soluion || 5.5215 (220.05) x10" 1 _t_T 4240105) 10° o
1
Precautions: Avoid contact with skin and eyes.
immediately with plenty of water and seek medical at
Storage and Stability
UUncpened pack stored at 2-25 °C has a produc i
container label. Once opened, product stability is 5 mpr
Disposal Procedure
Disposal procedures should me
Manufacture:
B&E Bio-technology Co.,Ltd.
10 Baoyuan Road, aishan District, Vata S0,2540
‘requirements of apy
|
base of skin contac, fush the area y water. In cask
{cot swallowed; indice voriing and Seek medica ac
24 months after the date of manufacture. The expit
ths at 2-95 °C.
{cable local regulations.
(China
of confact with eyes, rinse
tion datp is indicated on the