1) Describe with neat sketch working of three phase induction motor.
2) Explain construction of three phase induction motor. 3) State the material used and function of following parts in Induction motor.- i) stator core, ii) slip ring, iii) stator winding, iv) squirrel cage rotor 4) List different torques and write formula with respect to induction motor. 5) Derive the condition for maximum torque under running condition of a 3 phase induction motor. 6) Explain four quadrant operation of induction motor with any practical application/example. 7) Prove that for a 3Ø induction motor. Rotor copper loss = s × Rotor input. 8) The power input to a 500V 50Hz 6 Pole 3Ø induction motor running at 975 rpm is 40 kW. The stator losses are 1 kW and friction and windage losses are 2 kW. Calculate : (i) Slip (ii) Rotor copper loss (iii) Shaft power (iv) Efficiency 9) A 400V, 50Hz slip ring type three phase induction motor is star connected and has per phase rotor resistance and standstill reactance of 0.5 and 1.5 ohm respectively. Calculate resistance to be added per phase to achieve maximum torque at starting. 10) Explain working of autotransformer starter for a 3 phase induction motor with neat diagram. 11) Explain working of DOL starter for a 3 phase induction motor with neat diagram. 12) Explain working of star delta starter for a 3 phase induction motor with neat diagram. 13) Explain working of rotor resistance starter for a 3 phase induction motor with neat diagram. 14) Explain the activities carried out during weekly maintenance of 3 ph. Induction motor. 15) Draw and explain torque slip characteristics of induction motor shows the effect of rotor resistance. 16) Write and explain any four selection criteria’s w.r.t. application of induction motor. 17) Explain “ Induction motor as generalised transformer with phasor diagram”.